From mboxrd@z Thu Jan  1 00:00:00 1970
From: <bogus@does.not.exist.com>
Date: Fri, 27 Jun 2014 08:01:13 -0000
Subject: No subject
Message-ID: <mailman.12.1411600109.2342.u-boot@lists.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Acked-by: Simon Glass <sjg@chromium.org>

But please see a request below:

[snip]

> diff --git a/dts/Kconfig b/dts/Kconfig
> new file mode 100644
> index 0000000..20be556
> --- /dev/null
> +++ b/dts/Kconfig
> @@ -0,0 +1,48 @@
> +#
> +# Device Tree Control
> +#
> +# TODO:
> +#   This feature is not currently supported for SPL,
> +#    but this restriction should be removed in the future.
> +
> +config SUPPORT_OF_CONTROL
> +       bool
> +
> +menu "Device Tree Control"
> +       depends on !SPL_BUILD
> +       depends on SUPPORT_OF_CONTROL
> +
> +config OF_CONTROL
> +       bool "Run-time configuration via Device Tree"
> +       help
> +         This feature provides for run-time configuration of U-Boot
> +         via a flattened device tree.
> +
> +choice
> +       prompt "Provider of DTB for DT control"
> +       depends on OF_CONTROL
> +
> +config OF_SEPARATE
> +       bool "Separate DTB for DT control"
> +       depends on !SANDBOX
> +       help
> +         If this option is enabled, the device tree will be built and
> +         placed as a separate u-boot.dtb file alongside the U-Boot image.
> +
> +config OF_EMBED
> +       bool "Embedded DTB for DT control"
> +       help
> +         If this option is enabled, the device tree will be picked up and
> +         built into the U-Boot image.

Can you please add " This is suitable for debugging
and development only and is not recommended for production devices."

> +
> +config OF_HOSTFILE
> +       bool "Host filed DTB for DT control"
> +       depends on SANDBOX
> +       help
> +         If this option is enabled, DTB will be read from a file on startup.
> +         This is only useful for Sandbox.  Use the -d flag to U-Boot to
> +         specify the file to read.
> +
> +endchoice
> +
> +endmenu

Regards,
Simon