From mboxrd@z Thu Jan 1 00:00:00 1970 From: Date: Tue, 19 Aug 2008 20:18:26 -0000 Subject: No subject Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de wouldn't complain if it isn't as the code is correct. Regards, Richard W. > -----Original Message----- > From: u-boot-users-admin at lists.sourceforge.net > [mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf > Of George G. Davis > Sent: Wednesday, December 03, 2003 9:33 AM > To: Cam > Cc: u-boot-users at lists.sourceforge.net > Subject: Re: [U-Boot-Users] tiny patch for examples/Makefile > (objcopy related) > > > > > Cam wrote: > > Hello u-boot-users, > > > > Here is a short patch for the examples/Makefile. This improves > > reliability in the case of a deficient toolchain. > > > > For example the MontaVista (pro 3.0) ppc_82xx objcopy does > not accept > > srec input, and produces an empty output file which can > confuse make. > > Yep, I had noticed this long ago too. Why not just add "-I > srec" as in the attached? > > -- > Regards, > George > > > > > This patch ensures that the binary image is produced from > the elf file > > and not the srec file, which allows a clean build. > > > > -Cam > > > > PS. MontaVista have 'no general interest in supporting srec input' > > because of 'how little information srec files contain'. > > > > > > > ---------------------------------------------------------------------- > > -- > > > > diff -urN u-boot-1.0.0.orig/examples/Makefile > u-boot-1.0.0/examples/Makefile > > --- u-boot-1.0.0.orig/examples/Makefile 2003-10-14 > 20:43:56.000000000 +0100 > > +++ u-boot-1.0.0/examples/Makefile 2003-12-03 > 11:21:04.000000000 +0000 > > @@ -104,7 +104,7 @@ > > $(OBJCOPY) -O srec $(<:.o=) $@ > > > > %.bin: %.srec > > - $(OBJCOPY) -O binary $< $@ 2>/dev/null > > + $(OBJCOPY) -O binary $(<:.srec=) $@ 2>/dev/null > > > > > > > ############################################################## > ########### > > >