From: Thomas Kirk <thomas@arkena.dk>
To: lartc@vger.kernel.org
Subject: [LARTC] Wondershaper modifications
Date: Thu, 09 Oct 2003 08:42:51 +0000 [thread overview]
Message-ID: <marc-lartc-106568905530749@msgid-missing> (raw)
Hep Dear Listmembers and Stef!
Setup
Internet
eth0
|
|
-----------------
| | | |
eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc
All Lans are natted to eth0
Now i use wondershaper (1.1a) on eth0 to shap interactive traffic
(work allready thanks!) But i have a special requirments for
priorities
samba traffic from eth1 to internet. Ive done this with the following
lines in iptables and wondershaper :
iptables :
$IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j
MARK --set-mark 2
$IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j
MARK --set-mark 2
wondershaper :
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw
classid 1:10
This setup seems to work partly. When i browser network on anohter
host over internet i get no lag and fast response (low latency).
But when i try to edit file (3kb) it takes around 10 seconds to save
the file? Since my connection is 2048/512 and ive set my UPLINKE0 it
should take no more than 1-2 secs to update a file over internet? What
am i overlooking here?
--
Venlig hilsen/Kind regards
Thomas Kirk
ARKENA
tlf/phone +4570233456
thomas(at)arkena(dot)com
Http://www.arkena.com
"It's naive to think you can change a person--except maybe that
boy who works in the library." -- Lisa Simpson
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2003-10-09 8:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-09 8:42 Thomas Kirk [this message]
2003-10-09 16:51 ` [LARTC] Wondershaper modifications Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106568905530749@msgid-missing \
--to=thomas@arkena.dk \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.