From mboxrd@z Thu Jan 1 00:00:00 1970 From: Muhammad Reza Date: Thu, 09 Oct 2003 12:15:19 +0000 Subject: Re: [LARTC] newbie question Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org thanks eth1 i guess..can I do shapping/scheduling on my LAN based on subnet ?. |--subnet 10kbit ISP---eth0-eth1---LAN---subnet 20kbit |--subnet 15kbit can htb or any tc do that for me..and how can i know my actual ceiling b/w traffic at eth1, so i can set it ass parent ? i have a 10/100 ethernet. cheers .:NewBie:. jeremie le-hen wrote: >>in this schema in what device i should implement shapping (htb) >> >>ISP-----eth0 -eth1----LAN >> >> > >If you implement your shaping/scheduling on eth1, then your LAN will >be affected, but not the Linux box itself. If you want your gateway >to be affected too, then put it on eth0. Furthermore, if one day you >choose to add another LAN on eth2, shapping will also work for the >latter without any additional configuration. > >Regards, > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/