From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Frank_Svendsb=F8e?= Date: Fri, 9 Apr 2010 10:23:10 +0200 Subject: [U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash? In-Reply-To: References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Apr 9, 2010 at 10:07 AM, prakash bedge wrote: > Hi Frank, > > Why?I should use MIRRORX16 in BDI3000 config file? > According to the different flash algorithms described in the BDI manual, this was the closest we found, and it works. What chiptype do you use today? > Can you please tell which?boards support the S29GL512P NOR flash? > None yet I think. We'll commit a patch soon which supports the Siemens Digital Powerline Modem (DPM). Our U-Boot/Linux hardware is based on Analogue & Micros Adder Module, but modified a bit (different flash and SDRAM, contains an FPGA, an AVR and a TI DSP). Best regards, Frank > Regards, > Prakash Bedge > On Fri, Apr 9, 2010 at 1:18 PM, Frank Svendsb?e > wrote: >> >> On Fri, Apr 9, 2010 at 7:26 AM, prakash bedge >> wrote: >> > Hi, >> > >> > In U-boot I am not seeing the support for Spansion S29GL512P NOR flash. >> > >> > This chip is CFI compliant so I believe the common CFI driver should >> > work >> > with this chip. >> > >> > Does U-boot supports S29GL512P NOR flash or I have to implement the >> > functionality to support S29GL512P? >> > >> > If anyone has tried with S29GL512P NOR flash please share the >> > experiecne. >> > >> >> Hi Prakash, >> >> I can confirm the S29GL512P is working with U-Boot (and Linux). No >> special work has been >> done to make it work. Use chiptype MIRRORX16, if you're using a >> BDI3000 JTAG to flash U-Boot. >> >> Good luck >> Frank >> >> > >> > Thanks & Regards, >> > Prakash >> > >> > _______________________________________________ >> > U-Boot mailing list >> > U-Boot at lists.denx.de >> > http://lists.denx.de/mailman/listinfo/u-boot >> > >> > > >