All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johannes Schindelin <Johannes.Schindelin@gmx.de>
To: "SZEDER Gábor" <szeder.dev@gmail.com>
Cc: Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>,
	git@vger.kernel.org, Junio C Hamano <gitster@pobox.com>
Subject: Re: [PATCH v2 1/9] built-in add -p: support interactive.diffFilter
Date: Mon, 13 Jan 2020 07:47:23 +0100 (CET)	[thread overview]
Message-ID: <nycvar.QRO.7.76.6.2001130740240.46@tvgsbejvaqbjf.bet> (raw)
In-Reply-To: <20200107225749.GD32750@szeder.dev>

[-- Attachment #1: Type: text/plain, Size: 1965 bytes --]

Hi Gábor,

On Tue, 7 Jan 2020, SZEDER Gábor wrote:

> On Wed, Dec 25, 2019 at 11:56:52AM +0000, Johannes Schindelin via GitGitGadget wrote:
> > The Perl version supports post-processing the colored diff (that is
> > generated in addition to the uncolored diff, intended to offer a
> > prettier user experience) by a command configured via that config
> > setting, and now the built-in version does that, too.
>
> So this patch makes the test 'detect bogus diffFilter output' in
> 't3701-add-interactive.sh' succeed with the builtin interactive add,
> but I stumbled upon a test failure caused by SIGPIPE in an
> experimental Travis CI s390x build:
>
>   expecting success of 3701.49 'detect bogus diffFilter output':
>           git reset --hard &&
>
>           echo content >test &&
>           test_config interactive.diffFilter "echo too-short" &&
>           printf y >y &&
>           test_must_fail force_color git add -p <y
>
>   + git reset --hard
>   HEAD is now at 6ee5ee5 test
>   + echo content
>   + test_config interactive.diffFilter echo too-short
>   + printf y
>   + test_must_fail force_color git add -p
>   test_must_fail: died by signal 13: force_color git add -p
>   error: last command exited with $?=1
>
> Turns out it's a general issue, and
>
>   GIT_TEST_ADD_I_USE_BUILTIN=1 ./t3701-add-interactive.sh -r 39,49 --stress
>
> fails within 10 seconds on my Linux box, whereas the scripted 'add -p'
> managed to survive a couple hundred repetitions.

You're right, of course. And I had let that slip for too long, as I saw it
sporadically happen in the Azure Pipeline, too.

This took quite a while to figure out, and I won't claim that I understand
_all_ the details: I _think_ that `stdin` being so short "breaks the pipe"
and interferes with `add -p`'s normal operation, so I needed to explicitly
use the `sigchain` feature to ignore `SIGPIPE` during `add -p`'s main
loop.

Thanks,
Dscho

  reply	other threads:[~2020-01-13  6:47 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-21 22:41 [PATCH 0/9] built-in add -p: add support for the same config settings as the Perl version Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 1/9] built-in add -p: support interactive.diffFilter Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 2/9] built-in add -p: handle diff.algorithm Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 3/9] terminal: make the code of disable_echo() reusable Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 4/9] terminal: accommodate Git for Windows' default terminal Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 5/9] terminal: add a new function to read a single keystroke Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 6/9] built-in add -p: respect the `interactive.singlekey` config setting Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 7/9] built-in add -p: handle Escape sequences in interactive.singlekey mode Johannes Schindelin via GitGitGadget
2019-12-21 22:41 ` [PATCH 8/9] built-in add -p: handle Escape sequences more efficiently Johannes Schindelin via GitGitGadget
2019-12-21 22:42 ` [PATCH 9/9] ci: include the built-in `git add -i` in the `linux-gcc` job Johannes Schindelin via GitGitGadget
2019-12-21 22:53   ` SZEDER Gábor
2019-12-25 11:56     ` Johannes Schindelin
2019-12-22  0:11   ` Junio C Hamano
2019-12-25 11:57     ` Johannes Schindelin
2019-12-24 18:23 ` [PATCH 0/9] built-in add -p: add support for the same config settings as the Perl version Junio C Hamano
2019-12-24 18:39   ` Junio C Hamano
2019-12-25  8:46     ` Simon Ruderich
2019-12-25 12:09     ` Johannes Schindelin
2019-12-25 12:02   ` Johannes Schindelin
2019-12-25 11:56 ` [PATCH v2 " Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 1/9] built-in add -p: support interactive.diffFilter Johannes Schindelin via GitGitGadget
2020-01-07 22:57     ` SZEDER Gábor
2020-01-13  6:47       ` Johannes Schindelin [this message]
2019-12-25 11:56   ` [PATCH v2 2/9] built-in add -p: handle diff.algorithm Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 3/9] terminal: make the code of disable_echo() reusable Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 4/9] terminal: accommodate Git for Windows' default terminal Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 5/9] terminal: add a new function to read a single keystroke Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 6/9] built-in add -p: respect the `interactive.singlekey` config setting Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 7/9] built-in add -p: handle Escape sequences in interactive.singlekey mode Johannes Schindelin via GitGitGadget
2019-12-25 11:56   ` [PATCH v2 8/9] built-in add -p: handle Escape sequences more efficiently Johannes Schindelin via GitGitGadget
2019-12-25 11:57   ` [PATCH v2 9/9] ci: include the built-in `git add -i` in the `linux-gcc` job Johannes Schindelin via GitGitGadget
2019-12-26 20:48     ` Derrick Stolee
2020-01-01 22:10       ` Johannes Schindelin
2019-12-26 20:45   ` [PATCH v2 0/9] built-in add -p: add support for the same config settings as the Perl version Junio C Hamano
2020-01-13  8:29   ` [PATCH v3 00/10] " Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 01/10] built-in add -i/-p: treat SIGPIPE as EOF Johannes Schindelin via GitGitGadget
2020-01-13 17:04       ` SZEDER Gábor
2020-01-13 18:33         ` Jeff King
2020-01-15 18:32           ` Junio C Hamano
2020-01-15 19:03             ` Jeff King
2020-01-14 12:47         ` Johannes Schindelin
2020-01-17 14:32         ` SZEDER Gábor
2020-01-17 18:58           ` Jeff King
2020-01-13  8:29     ` [PATCH v3 02/10] built-in add -p: support interactive.diffFilter Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 03/10] built-in add -p: handle diff.algorithm Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 04/10] terminal: make the code of disable_echo() reusable Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 05/10] terminal: accommodate Git for Windows' default terminal Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 06/10] terminal: add a new function to read a single keystroke Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 07/10] built-in add -p: respect the `interactive.singlekey` config setting Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 08/10] built-in add -p: handle Escape sequences in interactive.singlekey mode Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 09/10] built-in add -p: handle Escape sequences more efficiently Johannes Schindelin via GitGitGadget
2020-01-13  8:29     ` [PATCH v3 10/10] ci: include the built-in `git add -i` in the `linux-gcc` job Johannes Schindelin via GitGitGadget
2020-01-14 18:43     ` [PATCH v4 00/10] built-in add -p: add support for the same config settings as the Perl version Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 01/10] t3701: adjust difffilter test Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 02/10] built-in add -p: support interactive.diffFilter Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 03/10] built-in add -p: handle diff.algorithm Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 04/10] terminal: make the code of disable_echo() reusable Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 05/10] terminal: accommodate Git for Windows' default terminal Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 06/10] terminal: add a new function to read a single keystroke Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 07/10] built-in add -p: respect the `interactive.singlekey` config setting Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 08/10] built-in add -p: handle Escape sequences in interactive.singlekey mode Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 09/10] built-in add -p: handle Escape sequences more efficiently Johannes Schindelin via GitGitGadget
2020-01-14 18:43       ` [PATCH v4 10/10] ci: include the built-in `git add -i` in the `linux-gcc` job Johannes Schindelin via GitGitGadget

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=nycvar.QRO.7.76.6.2001130740240.46@tvgsbejvaqbjf.bet \
    --to=johannes.schindelin@gmx.de \
    --cc=git@vger.kernel.org \
    --cc=gitgitgadget@gmail.com \
    --cc=gitster@pobox.com \
    --cc=szeder.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.