From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Wu Date: Thu, 08 Apr 2010 11:16:26 -0400 Subject: [U-Boot] [PATCH 2/7] AT49BV322A Flash: the erase regions are in the wrong order. In-Reply-To: <201004081135.35853.sr@denx.de> References: <201004081135.35853.sr@denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefan, I am new here and I am not quite clear about how to split this patch. Any suggestion? Regards, David On Thu, 08 Apr 2010 05:35:35 -0400, Stefan Roese wrote: > On Thursday 08 April 2010 02:00:23 David Wu wrote: >> The device id for this Flash is 0xc8. >> >> Signed-off-by: David Wu >> --- >> drivers/mtd/cfi_flash.c | 4 +++- >> 1 files changed, 3 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c >> index fdba297..af86f99 100644 >> --- a/drivers/mtd/cfi_flash.c >> +++ b/drivers/mtd/cfi_flash.c >> @@ -1690,8 +1690,10 @@ static void flash_fixup_atmel(flash_info_t *info, >> struct cfi_qry *qry) >> /* AT49BV6416(T) list the erase regions in the wrong order. >> * However, the device ID is identical with the non-broken >> * AT49BV642D they differ in the high byte. >> + * AT49BV322A is also in the wrong order. >> */ >> - if (info->device_id == 0xd6 || info->device_id == 0xd2) >> + if (info->device_id == 0xd6 || info->device_id == 0xd2 || >> + info->device_id == 0xc8) >> reverse_geometry = !reverse_geometry; >> >> if (reverse_geometry) > > Could you please split this patch from the patch series. I'll push it > via the > CFI git repository then. Thanks. > > Cheers, > Stefan > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de > >