* [seabios test] 118668: regressions - FAIL
@ 2018-02-09 6:19 osstest service owner
0 siblings, 0 replies; only message in thread
From: osstest service owner @ 2018-02-09 6:19 UTC (permalink / raw)
To: xen-devel, osstest-admin
flight 118668 seabios real [real]
http://logs.test-lab.xenproject.org/osstest/logs/118668/
Regressions :-(
Tests which did not succeed and are blocking,
including tests which could not be run:
test-amd64-amd64-xl-qemuu-ws16-amd64 17 guest-stop fail REGR. vs. 115539
Tests which did not succeed, but are not blocking:
test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop fail like 115539
test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail like 115539
test-amd64-i386-xl-qemuu-ws16-amd64 17 guest-stop fail like 115539
test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass
test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass
test-amd64-amd64-qemuu-nested-amd 17 debian-hvm-install/l1/l2 fail never pass
test-amd64-amd64-xl-qemuu-win10-i386 10 windows-install fail never pass
test-amd64-i386-xl-qemuu-win10-i386 10 windows-install fail never pass
version targeted for testing:
seabios 4a6dbcea3e412fe12effa2f812f50dd7eae90955
baseline version:
seabios 0ca6d6277dfafc671a5b3718cbeb5c78e2a888ea
Last test of basis 115539 2017-11-03 20:48:58 Z 97 days
Failing since 115733 2017-11-10 17:19:59 Z 90 days 113 attempts
Testing same since 118668 2018-02-08 04:50:43 Z 1 days 1 attempts
------------------------------------------------------------
People who touched revisions under test:
Kevin O'Connor <kevin@koconnor.net>
Marcel Apfelbaum <marcel@redhat.com>
Michael S. Tsirkin <mst@redhat.com>
Nikolay Nikolov <nickysn@users.sourceforge.net>
Paul Menzel <pmenzel@molgen.mpg.de>
Stefan Berger <stefanb@linux.vnet.ibm.com>
jobs:
build-amd64-xsm pass
build-i386-xsm pass
build-amd64 pass
build-i386 pass
build-amd64-libvirt pass
build-i386-libvirt pass
build-amd64-pvops pass
build-i386-pvops pass
test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass
test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass
test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass
test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass
test-amd64-amd64-qemuu-nested-amd fail
test-amd64-i386-qemuu-rhel6hvm-amd pass
test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass
test-amd64-i386-xl-qemuu-debianhvm-amd64 pass
test-amd64-amd64-xl-qemuu-win7-amd64 fail
test-amd64-i386-xl-qemuu-win7-amd64 fail
test-amd64-amd64-xl-qemuu-ws16-amd64 fail
test-amd64-i386-xl-qemuu-ws16-amd64 fail
test-amd64-amd64-xl-qemuu-win10-i386 fail
test-amd64-i386-xl-qemuu-win10-i386 fail
test-amd64-amd64-qemuu-nested-intel pass
test-amd64-i386-qemuu-rhel6hvm-intel pass
------------------------------------------------------------
sg-report-flight on osstest.test-lab.xenproject.org
logs: /home/logs/logs
images: /home/logs/images
Logs, config files, etc. are available at
http://logs.test-lab.xenproject.org/osstest/logs
Explanation of these reports, and of osstest in general, is at
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master
http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master
Test harness code can be found at
http://xenbits.xen.org/gitweb?p=osstest.git;a=summary
Not pushing.
------------------------------------------------------------
commit 4a6dbcea3e412fe12effa2f812f50dd7eae90955
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:27:01 2018 +0200
floppy: Use timer_check() in floppy_wait_irq()
Use timer_check() instead of using floppy_motor_counter in BDA for the
timeout check in floppy_wait_irq().
The problem with using floppy_motor_counter was that, after it reaches
0, it immediately stops the floppy motors, which is not what is
supposed to happen on real hardware. Instead, after a timeout (like in
the end of every floppy operation, regardless of the result - success,
timeout or error), the floppy motors must be kept spinning for
additional 2 seconds (the FLOPPY_MOTOR_TICKS). So, now the
floppy_motor_counter is initialized to 255 (the max value) in the
beginning of the floppy operation. For IRQ timeouts, a different
timeout is used, specified by the new FLOPPY_IRQ_TIMEOUT constant
(currently set to 5 seconds - a fairly conservative value, but should
work reliably on most floppies).
After the floppy operation, floppy_drive_pio() resets the
floppy_motor_counter to 2 seconds (FLOPPY_MOTOR_TICKS).
This is also consistent with what other PC BIOSes do.
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 488ede2297461af9d60dd21cff853a49afdc2c70
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:27:00 2018 +0200
floppy: Reset the floppy motor count in floppy_drive_pio()
Reset the floppy motor count, so the motor keeps spinning 2 seconds
after a floppy operation, performed by floppy_drive_pio().
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 53d82f0ee8eba571689f64b748bca8e9badda8b2
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:26:59 2018 +0200
floppy: Preserve motor and drive sel bits when resetting the floppy controller
In case of read or write errors, the floppy system is usually reset and the
operation is retried. In that case, the floppy motor state must be preserved
in order to avoid creating jitter and keep the floppy motor spinning smoothly
at a constant speed. Additionally, the drive select bits should probably also
be preserved, because some systems might need a small delay after selecting a
new drive. In that case, the operation would be retried, without changing
the currently selected drive.
In floppy_enable_controller(), the IRQ bit is now enabled first, before the
reset bit is set. I'm not completely sure whether this is necessary. It is
done just in case some hardware introduces a delay between setting this bit
and actually enabling the IRQ, which would cause us to miss the IRQ, sent by
the controller immediately after reset.
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 53fc631307b2c4a403e183afcc5ffe27987349a6
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:26:58 2018 +0200
floppy: Introduce FLOPPY_DOR_XXX constants
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 5157a7882de8b50c2365fd9166c5d91861a478a2
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:26:57 2018 +0200
floppy: Introduce floppy_dor_mask()
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 3ddb42f38f5054aa6eed7971f10da0adc076c74e
Author: Nikolay Nikolov <nickysn@users.sourceforge.net>
Date: Sun Feb 4 17:26:56 2018 +0200
floppy: Introduce the floppy_dor_read() function
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
commit 14d91c353e19b7085fdbb7b2dcc43f3355665670
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Thu Jan 11 22:15:12 2018 +0200
pci: fix 'io hints' capability for RedHat PCI bridges
Commit ec6cb17f (pci: enable RedHat PCI bridges to reserve additional
resources on PCI init)
added a new vendor specific PCI capability for RedHat PCI bridges
allowing them to reserve additional buses and/or IO/MEM space.
When adding the IO hints PCI capability to the pcie-root-port
without specifying a value for bus reservation, the subordinate bus
computation is wrong and the guest kernel gets messed up.
Fix it by returning to prev code if the value for bus
reservation is not set.
Removed also a wrong debug print "PCI: invalid QEMU resource reserve
cap offset" which appears if the 'IO hints' capability is not present.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
commit 844b86464a5cbfffb62b87808632018ca250d867
Author: Paul Menzel <pmenzel@molgen.mpg.de>
Date: Mon Oct 2 08:13:13 2017 +0200
docs/Download: Use more secure HTTPS URLs where possible
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
commit df46d10c8a7b88eb82f3ceb2aa31782dee15593d
Author: Stefan Berger <stefanb@linux.vnet.ibm.com>
Date: Tue Nov 14 15:03:47 2017 -0500
tpm: Add support for TPM2 ACPI table
Add support for the TPM2 ACPI table. If we find it and its
of the appropriate size, we can get the log_area_start_address
and log_area_minimum_size from it.
The latest version of the spec can be found here:
https://trustedcomputinggroup.org/tcg-acpi-specification/
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
commit 0541f2f0f246e77d7c726926976920e8072d1119
Author: Kevin O'Connor <kevin@koconnor.net>
Date: Fri Nov 10 12:20:35 2017 -0500
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
commit 9ce6778f08c632c52b25bc8f754291ef18710d53
Author: Kevin O'Connor <kevin@koconnor.net>
Date: Fri Nov 10 12:16:36 2017 -0500
docs: Add sercon-port to Runtime_config.md documentation
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
commit 63451fca13c75870e1703eb3e20584d91179aebc
Author: Kevin O'Connor <kevin@koconnor.net>
Date: Fri Nov 10 11:49:19 2017 -0500
docs: Note v1.11.0 release
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-02-09 6:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-09 6:19 [seabios test] 118668: regressions - FAIL osstest service owner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.