From mboxrd@z Thu Jan 1 00:00:00 1970 From: Learner Study Subject: Re: Linux Raid performance Date: Fri, 2 Apr 2010 14:37:40 -0700 Message-ID: References: <20100331201539.GA19395@rap.rap.dk> <20100402110506.GA16294@rap.rap.dk> <20100402211443.GA2380@rap.rap.dk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20100402211443.GA2380@rap.rap.dk> Sender: linux-raid-owner@vger.kernel.org To: Keld Simonsen Cc: linux-raid@vger.kernel.org, keld@dkuug.dk, learner.study@gmail.com List-Id: linux-raid.ids I have seen ~180MB/s RAID5 performance with 4 disks...are you saying that I could achieve even higher if I have more number of disks (so instead of 3+1, try 6+1 or 9+1)? Logically, this sounds right but wanted to verify my thought process with you.... Thanks! On Fri, Apr 2, 2010 at 2:14 PM, Keld Simonsen wrote: > On Fri, Apr 02, 2010 at 10:55:53AM -0700, Learner Study wrote: >> Hi Keld: >> >> Thanks for your email... >> >> 1. Can you pls point me to this benchmark (which shows 500MB/s)? I >> would like to know which CPU, HDDs and kernel version used to achiev= e >> this... > > http://home.comcast.net/~jpiszcz/20080329-raid/ > 496843 =A0 KB/s for sequential input with 10 raptor drives > There probably is an email in the archives with more info on the > test. > >> 2. Secondly, I would like to understand how raid stack (md driver) >> scales as we add more cores...if single core gives ~500MB/s, can two >> core give ~1000MB/s? can four cores give ~2000MB/s? etc.... > > No, the performance is normally limited by the number of drives. > I would not wsay that more cores woould do a little > but it would be in the order of 1-2 % I think. > This is also dependent on wheteher the code actually runs threaded. > I doubt it.... > > best regard > keld > >> >> Thanks for your time. >> >> On Fri, Apr 2, 2010 at 4:05 AM, Keld Simonsen wrot= e: >> > On Thu, Apr 01, 2010 at 08:07:25PM -0700, Learner Study wrote: >> >> Hi Keld: >> >> >> >> Do we have raid5/6 numbers for linux on any multi-core CPU? Most = of >> >> the benchmarks I have seen on wiki show raid5 perf to be ~150MB/s= with >> >> single core CPUs. How does that scale with multiple cores? Someth= ing >> >> like intel's jasper forest??? >> > >> > I have not checked if the benchmarks were on multi core machines. >> > It should not matter much if there were more than one CPU, but >> > of cause it helps a little. bonnie++ test reports cpu usage, and t= his >> > is not insignificant, say in the 20 -60 % range for some tests, >> > but nowhere near a bottleneck. There was one with a raid5 performa= nce >> > seq read of about 500 MB/s with 36 % cpu utilization, so it is >> > definitely possible to come beyound 150 MB/s. The speed is largely >> > dependent on number of disk drives you employ. >> > >> > >> >> If available, can u pls point me to numbers with multi-core CPU? >> > >> > I dont have such benchmarks AFAIK. But new benchmarks are always w= elcome, >> > so please feel free to submit your findings. >> > >> > Best regards >> > keld >> > >> >> Thanks! >> >> >> >> On Wed, Mar 31, 2010 at 1:15 PM, Keld Simonsen = wrote: >> >> > On Wed, Mar 31, 2010 at 12:42:57PM -0700, Learner Study wrote: >> >> >> Hi Linux Raid Experts: >> >> >> >> >> >> I was looking at following wiki on raid perf on linux: >> >> >> >> >> >> https://raid.wiki.kernel.org/index.php/Performance >> >> >> >> >> >> and notice that the performance numbers are with 2.6.12 kernel= =2E >> >> >> >> >> >> Do we perf numbers for: >> >> >> - latest kernel (something like 2.6.27 / 2.6.31) >> >> >> - raid 5 and 6 >> >> >> >> >> >> Can someone please point me to appropriate link? >> >> > >> >> > The link mentioned above has a number of other performance repo= rts, for other levels of the kernel. >> >> > Anyway you should be able to get comparable results for newer k= ernels, the kernel has not become >> >> > slower since 2.6.12 on RAID. >> >> > >> >> > best regards >> >> > Keld >> >> > >> >> -- >> >> To unsubscribe from this list: send the line "unsubscribe linux-r= aid" in >> >> the body of a message to majordomo@vger.kernel.org >> >> More majordomo info at =A0http://vger.kernel.org/majordomo-info.h= tml >> > >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-raid= " in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at =A0http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html