All of lore.kernel.org
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Daniel Mack <zonque@gmail.com>
Cc: alsa-devel@alsa-project.org, clemens@ladisch.de
Subject: Re: [PATCH] ALSA: snd-usb: remove refactorization left-overs
Date: Sat, 21 Apr 2012 17:41:12 +0200	[thread overview]
Message-ID: <s5h1unh6qjr.wl%tiwai@suse.de> (raw)
In-Reply-To: <1335009132-17346-1-git-send-email-zonque@gmail.com>

At Sat, 21 Apr 2012 13:52:12 +0200,
Daniel Mack wrote:
> 
> Drop some struct members and definitions that became obsolete during
> the refactorization of the driver.
> 
> Signed-off-by: Daniel Mack <zonque@gmail.com>

Thanks, applied now.
(BTW, topic/usb-endpoint was merged into topic/misc branch.)


Takashi

> ---
>  sound/usb/card.h |   13 -------------
>  sound/usb/proc.c |    6 +-----
>  2 files changed, 1 insertions(+), 18 deletions(-)
> 
> diff --git a/sound/usb/card.h b/sound/usb/card.h
> index 77d2eec..0d37238 100644
> --- a/sound/usb/card.h
> +++ b/sound/usb/card.h
> @@ -43,13 +43,6 @@ struct snd_urb_ctx {
>  	struct list_head ready_list;
>  };
>  
> -struct snd_urb_ops {
> -	int (*prepare)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u);
> -	int (*retire)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u);
> -	int (*prepare_sync)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u);
> -	int (*retire_sync)(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *u);
> -};
> -
>  struct snd_usb_endpoint {
>  	struct snd_usb_audio *chip;
>  
> @@ -125,11 +118,6 @@ struct snd_usb_substream {
>  	unsigned long active_mask;	/* bitmask of active urbs */
>  	unsigned long unlink_mask;	/* bitmask of unlinked urbs */
>  
> -	unsigned int nurbs;			/* # urbs */
> -	struct snd_urb_ctx dataurb[MAX_URBS];	/* data urb table */
> -	struct snd_urb_ctx syncurb[SYNC_URBS];	/* sync urb table */
> -	char *syncbuf;				/* sync buffer for all sync URBs */
> -	dma_addr_t sync_dma;			/* DMA address of syncbuf */
>  	/* data and sync endpoints for this stream */
>  	struct snd_usb_endpoint *data_endpoint;
>  	struct snd_usb_endpoint *sync_endpoint;
> @@ -141,7 +129,6 @@ struct snd_usb_substream {
>  	struct snd_pcm_hw_constraint_list rate_list;	/* limited rates */
>  	spinlock_t lock;
>  
> -	struct snd_urb_ops ops;		/* callbacks (must be filled at init) */
>  	int last_frame_number;          /* stored frame number */
>  	int last_delay;                 /* stored delay */
>  };
> diff --git a/sound/usb/proc.c b/sound/usb/proc.c
> index 06e23d8..ebc1a5b 100644
> --- a/sound/usb/proc.c
> +++ b/sound/usb/proc.c
> @@ -25,6 +25,7 @@
>  #include "usbaudio.h"
>  #include "helper.h"
>  #include "card.h"
> +#include "endpoint.h"
>  #include "proc.h"
>  
>  /* convert our full speed USB rate into sampling rate in Hz */
> @@ -137,14 +138,9 @@ static void proc_dump_ep_status(struct snd_usb_substream *subs,
>  static void proc_dump_substream_status(struct snd_usb_substream *subs, struct snd_info_buffer *buffer)
>  {
>  	if (subs->running) {
> -		unsigned int i;
>  		snd_iprintf(buffer, "  Status: Running\n");
>  		snd_iprintf(buffer, "    Interface = %d\n", subs->interface);
>  		snd_iprintf(buffer, "    Altset = %d\n", subs->altset_idx);
> -		snd_iprintf(buffer, "    URBs = %d [ ", subs->nurbs);
> -		for (i = 0; i < subs->nurbs; i++)
> -			snd_iprintf(buffer, "%d ", subs->dataurb[i].packets);
> -		snd_iprintf(buffer, "]\n");
>  		proc_dump_ep_status(subs, subs->data_endpoint, buffer);
>  		proc_dump_ep_status(subs, subs->sync_endpoint, buffer);
>  	} else {
> -- 
> 1.7.5.4
> 

      reply	other threads:[~2012-04-21 15:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-21 11:52 [PATCH] ALSA: snd-usb: remove refactorization left-overs Daniel Mack
2012-04-21 15:41 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5h1unh6qjr.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=clemens@ladisch.de \
    --cc=zonque@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.