From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: Cirrus CS4207 not working on 4.14.24 Date: Fri, 09 Mar 2018 15:25:38 +0100 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (mx2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 904A0266EBE for ; Fri, 9 Mar 2018 15:25:39 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Jorge Fernandez Monteagudo Cc: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org On Fri, 09 Mar 2018 15:24:10 +0100, Jorge Fernandez Monteagudo wrote: > > Sorry for the dumb question, but when you say "testing from the speaker" or "testing from the headphone" > > it's enough using alsamixer to mute headphone or mute speaker and run an aplay when running alsa-info.sh? No, I meant actually plugging and unplugging the headphone jack (and the corresponding mixer changes). Takashi > > ________________________________ > De: Takashi Iwai > Enviado: viernes, 9 de marzo de 2018 14:09:52 > Para: Jorge Fernandez Monteagudo > Cc: alsa-devel@alsa-project.org > Asunto: Re: [alsa-devel] Cirrus CS4207 not working on 4.14.24 > > On Fri, 09 Mar 2018 10:45:35 +0100, > Jorge Fernandez Monteagudo wrote: > > > > Hi! > > > > > > Your little patch works! I've attached the alsa-info for the 4.14.24 kernel once the > > > > system is running and no sound is available. > > > > > > The nodes are related to audio output. 0x03 DAC2 PCM linked to 0x0A: Line Out1 > > > > I suspect nodes 0x09, 0x0A and 0x0B are not able to recover from D3 state. > > That explains better. But NID 0x0b has no power control, so it > shouldn't be affected by itself. Rather NID 0x04 power-down can be > the issue, at least, for speaker outputs. For the headphone, both NID > 0x09 and 0x03 are used. > > Please try the driver without the patch, and get alsa-info.sh output > while testing from the speaker, and while testing the headphone, > individually. Attach both outputs for comparison. Maybe better to > compressed, otherwise it becomes too long. > > > thanks, > > Please > [2 ] >