From: Takashi Iwai <tiwai@suse.de>
To: Dylan Reid <dgreid@chromium.org>
Cc: alsa-devel@alsa-project.org, Stephen Warren <swarren@wwwdotorg.org>
Subject: Re: [PATCH 1/3] ALSA: hda - Remove dependency on bus->pci in hda_beep.c
Date: Thu, 27 Feb 2014 21:10:11 +0100 [thread overview]
Message-ID: <s5heh2omi58.wl%tiwai@suse.de> (raw)
In-Reply-To: <CAEUnVG4hXF46TCbRGgj13_cEBEXKsZEYxWb=RyV682++mi4pTA@mail.gmail.com>
At Thu, 27 Feb 2014 09:32:21 -0800,
Dylan Reid wrote:
>
> On Thu, Feb 27, 2014 at 8:57 AM, Takashi Iwai <tiwai@suse.de> wrote:
> > At Thu, 27 Feb 2014 08:44:48 -0800,
> > Dylan Reid wrote:
> >>
> >> On Thu, Feb 27, 2014 at 4:03 AM, Takashi Iwai <tiwai@suse.de> wrote:
> >> > At Wed, 19 Feb 2014 07:16:38 -0800,
> >> > Dylan Reid wrote:
> >> >>
> >> >> On Wed, Feb 19, 2014 at 12:33 AM, Takashi Iwai <tiwai@suse.de> wrote:
> >> >> > At Tue, 18 Feb 2014 11:04:19 -0700,
> >> >> > Stephen Warren wrote:
> >> >> >>
> >> >> >> On 02/15/2014 02:22 AM, Takashi Iwai wrote:
> >> >> >> > At Sat, 15 Feb 2014 10:17:33 +0100,
> >> >> >> > Takashi Iwai wrote:
> >> >> >> >>
> >> >> >> >> The default parent device can be obtained directly via card object, so
> >> >> >> >> we don't need to rely on pci->dev.parent. Since there is no access to
> >> >> >> >> pci_dev, we can reduce the inclusion of linux/pci.h, too.
> >> >> >> >>
> >> >> >> >> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> >> >> >> >
> >> >> >> > I forgot the cover page: these tree patches are trivial cleanups of
> >> >> >> > hda-codec drivers (not the controller) to work without PCI device
> >> >> >> > assignment. The idea was triggered by Dylan's question.
> >> >> >>
> >> >> >> The series seems fine to me, so briefly,
> >> >> >> Reviewed-by: Stephen Warren <swarren@nvidia.com>
> >> >> >
> >> >> > Thanks. Any chance to work on / submit other changes for Tegra
> >> >> > HD-audio support?
> >> >>
> >> >> That's the plan, hopefully I'll be able to find time to throw together
> >> >> an RFC by the end of the week.
> >> >
> >> > Since there was no patch appearing yet, I merged my latest development
> >> > branch to for-next branch, which includes lots of changes in
> >> > hda_intel.c and hda_codec.c. If any, please rebase your patches to
> >> > it.
> >>
> >> Thanks for the heads up. I've got a series that is almost ready, I'm
> >> still trying to tease part of the build out from under CONFIG_PCI in
> >> the hda makefile.
> >
> > I don't think we have a dependency on CONFIG_PCI in Makefile. Kconfig
> > has a dependency, but it can be easily reduced by a patch like below.
>
> Sounds good. I was looking at re-using some of the config options
> (HDMI codec and power save) for the platform driver as well. Maybe
> something like the following. SND_HDA would build the helper module
> and hda-codec that are used by both hda_intel and a platform driver.
I think we can simply allow building all HD-audio codec drivers when
CONFIG_SND_HDA is set. They are basically independent from the
controller type. There are also other selectable items like hwdep
support. The diff in sound/pci/hda would be like below.
Takashi
--
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index f2032dd7e35e..4cbf46e59d1c 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -1,8 +1,15 @@
-menuconfig SND_HDA_INTEL
- tristate "Intel HD Audio"
+menu "HD-Audio"
+
+config SND_HDA
+ tristate
select SND_PCM
select SND_VMASTER
select SND_KCTL_JACK
+
+config SND_HDA_INTEL
+ tristate "HD Audio PCI"
+ depends on SND_PCI
+ select SND_HDA
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) and its compatible devices.
@@ -13,7 +20,21 @@ menuconfig SND_HDA_INTEL
To compile this driver as a module, choose M here: the module
will be called snd-hda-intel.
-if SND_HDA_INTEL
+config SND_HDA_TEGRA
+ tristate "Tegra HD Audio"
+ select SND_HDA
+ help
+ Say Y here to support the HDA controller present in Nvidia
+ Tegra SoCs
+
+ This options enables support for the HD Audio controller
+ present in some Nvidia Tegra SoCs, used to communicate audio
+ to the HDMI output.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hda-tegra.
+
+if SND_HDA
config SND_HDA_DSP_LOADER
bool
@@ -49,7 +70,7 @@ config SND_HDA_RECONFIG
config SND_HDA_INPUT_BEEP
bool "Support digital beep via input layer"
- depends on INPUT=y || INPUT=SND_HDA_INTEL
+ depends on INPUT=y || INPUT=SND_HDA
help
Say Y here to build a digital beep interface for HD-audio
driver. This interface is used to generate digital beeps.
@@ -90,7 +111,7 @@ config SND_HDA_CODEC_REALTEK
snd-hda-intel driver, such as ALC880.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_REALTEK=m
+ depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
config SND_HDA_CODEC_ANALOG
tristate "Build Analog Device HD-audio codec support"
@@ -100,7 +121,7 @@ config SND_HDA_CODEC_ANALOG
snd-hda-intel driver, such as AD1986A.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_ANALOG=m
+ depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
config SND_HDA_CODEC_SIGMATEL
tristate "Build IDT/Sigmatel HD-audio codec support"
@@ -110,7 +131,7 @@ config SND_HDA_CODEC_SIGMATEL
snd-hda-intel driver, such as STAC9200.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SIGMATEL=m
+ depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
config SND_HDA_CODEC_VIA
tristate "Build VIA HD-audio codec support"
@@ -120,7 +141,7 @@ config SND_HDA_CODEC_VIA
snd-hda-intel driver, such as VT1708.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_VIA=m
+ depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
config SND_HDA_CODEC_HDMI
tristate "Build HDMI/DisplayPort HD-audio codec support"
@@ -130,7 +151,7 @@ config SND_HDA_CODEC_HDMI
Intel and Nvidia HDMI/DisplayPort codecs.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_HDMI=m
+ depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
config SND_HDA_I915
bool
@@ -145,7 +166,7 @@ config SND_HDA_CODEC_CIRRUS
snd-hda-intel driver, such as CS4206.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CIRRUS=m
+ depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
config SND_HDA_CODEC_CONEXANT
tristate "Build Conexant HD-audio codec support"
@@ -155,7 +176,7 @@ config SND_HDA_CODEC_CONEXANT
snd-hda-intel driver, such as CX20549.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CONEXANT=m
+ depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
config SND_HDA_CODEC_CA0110
tristate "Build Creative CA0110-IBG codec support"
@@ -165,7 +186,7 @@ config SND_HDA_CODEC_CA0110
snd-hda-intel driver, found on some Creative X-Fi cards.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0110=m
+ depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
config SND_HDA_CODEC_CA0132
tristate "Build Creative CA0132 codec support"
@@ -174,7 +195,7 @@ config SND_HDA_CODEC_CA0132
snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CA0132=m
+ depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
config SND_HDA_CODEC_CA0132_DSP
bool "Support new DSP code for CA0132 codec"
@@ -196,7 +217,7 @@ config SND_HDA_CODEC_CMEDIA
snd-hda-intel driver, such as CMI9880.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_CMEDIA=m
+ depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
config SND_HDA_CODEC_SI3054
tristate "Build Silicon Labs 3054 HD-modem codec support"
@@ -205,7 +226,7 @@ config SND_HDA_CODEC_SI3054
(and compatibles) support in snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_CODEC_SI3054=m
+ depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
config SND_HDA_GENERIC
tristate "Enable generic HD-audio codec parser"
@@ -214,7 +235,7 @@ config SND_HDA_GENERIC
in snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
- depends on SND_HDA_INTEL=y && SND_HDA_GENERIC=m
+ depends on SND_HDA=y && SND_HDA_GENERIC=m
config SND_HDA_POWER_SAVE_DEFAULT
int "Default time-out for HD-audio power-save mode"
@@ -225,3 +246,5 @@ config SND_HDA_POWER_SAVE_DEFAULT
power-save mode. 0 means to disable the power-save mode.
endif
+
+endmenu
next prev parent reply other threads:[~2014-02-27 20:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-15 9:17 [PATCH 1/3] ALSA: hda - Remove dependency on bus->pci in hda_beep.c Takashi Iwai
2014-02-15 9:17 ` [PATCH 2/3] ALSA: hda/realtek - Allow NULL bus->pci Takashi Iwai
2014-02-15 9:17 ` [PATCH 3/3] ALSA: hda - Remove superfluous inclusion of linux/pci.h Takashi Iwai
2014-02-15 9:22 ` [PATCH 1/3] ALSA: hda - Remove dependency on bus->pci in hda_beep.c Takashi Iwai
2014-02-18 18:04 ` Stephen Warren
2014-02-18 18:20 ` Dylan Reid
2014-02-19 8:33 ` Takashi Iwai
2014-02-19 15:16 ` Dylan Reid
2014-02-27 12:03 ` Takashi Iwai
2014-02-27 16:44 ` Dylan Reid
2014-02-27 16:57 ` Takashi Iwai
2014-02-27 17:32 ` Dylan Reid
2014-02-27 20:10 ` Takashi Iwai [this message]
2014-02-27 20:41 ` Dylan Reid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5heh2omi58.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dgreid@chromium.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.