From mboxrd@z Thu Jan 1 00:00:00 1970 From: Takashi Iwai Subject: Re: [PATCH - speaker-test 1/1] speaker-test: add --force-frequency option to allow hz outside range Date: Wed, 26 Feb 2014 16:16:46 +0100 Message-ID: References: Mime-Version: 1.0 (generated by SEMI 1.14.6 - "Maruoka") Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mx2.suse.de (cantor2.suse.de [195.135.220.15]) by alsa0.perex.cz (Postfix) with ESMTP id 42D6926572B for ; Wed, 26 Feb 2014 16:16:47 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Erik Ackermann Cc: alsa-devel List-Id: alsa-devel@alsa-project.org At Wed, 26 Feb 2014 07:01:10 -0800, Erik Ackermann wrote: > > Sure thing, sorry about that. Also cleaned up a bit of consistency, made > sure options that take parameters have them. Applied now. Thanks! Takashi > > > On Tue, Feb 25, 2014 at 11:14 PM, Takashi Iwai wrote: > > > At Tue, 25 Feb 2014 11:49:46 -0800, > > Erik Ackermann wrote: > > > > > > Updated the english po and de/fr/ja translations courtesy of Google > > > translate. Is there any sign-off required beyond the header git > > > format-patch adds? > > > > Thanks, applied the patch now. > > Could you update the man page, too? > > > > > > Takashi > > > [1.2 ] > > [2 0001-speaker-test-update-man-page-for-new-X-arg-also-cons.patch ] > From a00213fda7f33d573d5526901e95f889bd03ec7b Mon Sep 17 00:00:00 2001 > From: Erik Ackermann > Date: Wed, 26 Feb 2014 06:52:29 -0800 > Subject: [PATCH - speaker-test 1/1] speaker-test: update man page for new -X > arg, also consistency fixes > > Signed-off-by: Erik Ackermann > > diff --git a/speaker-test/speaker-test.1 b/speaker-test/speaker-test.1 > index 26d9882..add6b21 100644 > --- a/speaker-test/speaker-test.1 > +++ b/speaker-test/speaker-test.1 > @@ -13,7 +13,7 @@ > .. > .TH SPEAKER\-TEST 1 "April 2nd, 2011" speaker\-test > .SH NAME > -speaker\-test \- command\-line speaker test tone generator for ALSA > +speaker\-test \- command\-line speaker test tone generator for ALSA > .SH SYNOPSIS > .B speaker\-test [\-options] > > @@ -47,7 +47,7 @@ surround40:CARD=ICH5,DEV=0 > > .P Each of the devices is listed in the beginning of the definition so, > in the above example, there are four devices listed: null, default, front > -and surround40. So, if you want to test the last device you can > +and surround40. So, if you want to test the last device you can > run \fBspeaker\-test \-Dsurround40:ICH5 \-c 6\fR. The \fB\-c\fR option will > indicate that the six audio channels in the device have to be tested. > > @@ -86,7 +86,7 @@ When 0 is given, the periods given by \fB\-P\fP option is used. > The default value is 0. > > .TP > -\fB\-P\fP | \fB\-\-nperiods\fP \fPPERIODS\fP > +\fB\-P\fP | \fB\-\-nperiods\fP \fIPERIODS\fP > Use number of periods. The default value is 4. > > .TP > @@ -106,7 +106,7 @@ Pink noise is perceptually uniform noise -- that is, it sounds like every freque > You can pass the number from 1 to 3 as a backward compatibility. > > .TP > -\fB\-l\fP | \fB\-\-nloops\fP \fBCOUNT\fP > +\fB\-l\fP | \fB\-\-nloops\fP \fICOUNT\fP > > Specifies the number of loops. Zero means to run infinitely. > > @@ -114,7 +114,7 @@ When \fB\-s\fP option below with a valid channel is given, \fBspeaker\-test\fP w > always a single-shot without looping. > > .TP > -\fB\-s\fP | \fB\-\-speaker\fP \fBCHANNEL\fP > +\fB\-s\fP | \fB\-\-speaker\fP \fICHANNEL\fP > Do a single-shot speaker test for the given channel. The channel number starts from 1. > The channel number corresponds to left, right, rear-left, rear-right, center, LFE, > side-left, side-right, and so on. > @@ -123,20 +123,24 @@ For example, when 1 is passed, it tests the left channel only once rather than b > with looping. > > .TP > -\fB\-w\fP | \fB\-\-wavfile\fP > +\fB\-w\fP | \fB\-\-wavfile\fP \fIFILE\fP > Use the given WAV file for the playback instead of pre-defined WAV files. > > .TP > -\fB\-W\fP | \fB\-\-wavdir\fP > +\fB\-W\fP | \fB\-\-wavdir\fP \fIDIRECTORY\fP > Specify the directory containing WAV files for playback. > The default path is \fI/usr/share/sounds/alsa\fP. > > .TP > -\fB\-m\fP | \fB\-\-chmap\fP > +\fB\-m\fP | \fB\-\-chmap\fP \fIMAP\fP > Pass the channel map to override. > If the playback in a specific channel order or channel positions is > required, pass the channel position strings to this option. > > +.TP > +\fB\-X\fP | \fB\-\-force-frequency\fP > +Allow supplied \fIFREQ\fP to be outside the default range of 30-8000Hz. A minimum of 1Hz is still enforced. > + > .SH USAGE EXAMPLES > > Produce stereo sound from one stereo jack: > -- > 1.8.3.2 >