From: Jerry Meng <jerry-meng@foxmail.com>
To: johan@kernel.org
Cc: linux-usb@vger.kernel.org, Jerry Meng <jerry-meng@foxmail.com>
Subject: [PATCH v2] USB: serial: option: add Quectel EM061KGL series
Date: Wed, 31 May 2023 11:51:16 +0800 [thread overview]
Message-ID: <tencent_935361841584807CBAF9961AD0C83F2AC108@qq.com> (raw)
add support for Quectel EM061KGL series which are based on Qualcomm SDX12 chip
EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
Above products use the exact same interface layout and
option driver is for interfaces DIAG, NMEA and AT.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6008 Rev= 5.04
S: Manufacturer=Quectel
S: Product=Quectel EM061K-GL
S: SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
---
drivers/usb/serial/option.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 644a55447fd7..23d7b202590d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,8 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_VENDOR_ID 0x2c7c
/* These Quectel products use Quectel's vendor ID */
#define QUECTEL_PRODUCT_EC21 0x0121
+#define QUECTEL_PRODUCT_EM061K_LTA 0x0123
+#define QUECTEL_PRODUCT_EM061K_LMS 0x0124
#define QUECTEL_PRODUCT_EC25 0x0125
#define QUECTEL_PRODUCT_EG91 0x0191
#define QUECTEL_PRODUCT_EG95 0x0195
@@ -266,6 +268,8 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_RM520N 0x0801
#define QUECTEL_PRODUCT_EC200U 0x0901
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
+#define QUECTEL_PRODUCT_EM061K_LWW 0x6008
+#define QUECTEL_PRODUCT_EM061K_LCN 0x6009
#define QUECTEL_PRODUCT_EC200T 0x6026
#define QUECTEL_PRODUCT_RM500K 0x7001
@@ -1189,6 +1193,18 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0x00, 0x40) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
--
2.25.1
next reply other threads:[~2023-05-31 3:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 3:51 Jerry Meng [this message]
2023-06-02 9:12 ` [PATCH v2] USB: serial: option: add Quectel EM061KGL series Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tencent_935361841584807CBAF9961AD0C83F2AC108@qq.com \
--to=jerry-meng@foxmail.com \
--cc=johan@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.