* [PATCH -tip 3/3] kprobes/x86: Move kprobes stuff under arch/x86/kernel/kprobes/
2012-09-28 8:15 [PATCH -tip 0/3] Move kprobes files under the kprobes directory Masami Hiramatsu
2012-09-28 8:15 ` [PATCH -tip 1/3] ftrace: Move ARCH_SUPPORTS_FTRACE_SAVE_REGS in Kconfig Masami Hiramatsu
2012-09-28 8:15 ` [PATCH -tip 2/3] kprobes/x86: Move ftrace-based kprobe code into kprobes-ftrace.c Masami Hiramatsu
@ 2012-09-28 8:15 ` Masami Hiramatsu
2013-01-24 19:46 ` [tip:perf/core] kprobes/x86: Move kprobes stuff under arch/x86/ kernel/kprobes/ tip-bot for Masami Hiramatsu
2012-09-28 12:34 ` [PATCH -tip 0/3] Move kprobes files under the kprobes directory Steven Rostedt
2013-01-11 20:43 ` Steven Rostedt
4 siblings, 1 reply; 12+ messages in thread
From: Masami Hiramatsu @ 2012-09-28 8:15 UTC (permalink / raw)
To: Ingo Molnar, Ananth N Mavinakayanahalli, Steven Rostedt
Cc: Peter Zijlstra, Frederic Weisbecker, H. Peter Anvin,
linux-kernel, Ingo Molnar, yrl.pp-manager.tt, Thomas Gleixner
Move arch-dep kprobes stuff under arch/x86/kernel/kprobes.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
---
arch/x86/kernel/Makefile | 4
arch/x86/kernel/kprobes-common.h | 113 ----
arch/x86/kernel/kprobes-ftrace.c | 93 ---
arch/x86/kernel/kprobes-opt.c | 512 ------------------
arch/x86/kernel/kprobes.c | 1064 --------------------------------------
arch/x86/kernel/kprobes/Makefile | 7
arch/x86/kernel/kprobes/common.h | 113 ++++
arch/x86/kernel/kprobes/core.c | 1064 ++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/kprobes/ftrace.c | 93 +++
arch/x86/kernel/kprobes/opt.c | 512 ++++++++++++++++++
10 files changed, 1790 insertions(+), 1785 deletions(-)
delete mode 100644 arch/x86/kernel/kprobes-common.h
delete mode 100644 arch/x86/kernel/kprobes-ftrace.c
delete mode 100644 arch/x86/kernel/kprobes-opt.c
delete mode 100644 arch/x86/kernel/kprobes.c
create mode 100644 arch/x86/kernel/kprobes/Makefile
create mode 100644 arch/x86/kernel/kprobes/common.h
create mode 100644 arch/x86/kernel/kprobes/core.c
create mode 100644 arch/x86/kernel/kprobes/ftrace.c
create mode 100644 arch/x86/kernel/kprobes/opt.c
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index ebef9ad..61e703f 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -65,9 +65,7 @@ obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
-obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_OPTPROBES) += kprobes-opt.o
-obj-$(CONFIG_KPROBES_ON_FTRACE) += kprobes-ftrace.o
+obj-y += kprobes/
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/x86/kernel/kprobes-common.h b/arch/x86/kernel/kprobes-common.h
deleted file mode 100644
index 2e9d4b5..0000000
--- a/arch/x86/kernel/kprobes-common.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef __X86_KERNEL_KPROBES_COMMON_H
-#define __X86_KERNEL_KPROBES_COMMON_H
-
-/* Kprobes and Optprobes common header */
-
-#ifdef CONFIG_X86_64
-#define SAVE_REGS_STRING \
- /* Skip cs, ip, orig_ax. */ \
- " subq $24, %rsp\n" \
- " pushq %rdi\n" \
- " pushq %rsi\n" \
- " pushq %rdx\n" \
- " pushq %rcx\n" \
- " pushq %rax\n" \
- " pushq %r8\n" \
- " pushq %r9\n" \
- " pushq %r10\n" \
- " pushq %r11\n" \
- " pushq %rbx\n" \
- " pushq %rbp\n" \
- " pushq %r12\n" \
- " pushq %r13\n" \
- " pushq %r14\n" \
- " pushq %r15\n"
-#define RESTORE_REGS_STRING \
- " popq %r15\n" \
- " popq %r14\n" \
- " popq %r13\n" \
- " popq %r12\n" \
- " popq %rbp\n" \
- " popq %rbx\n" \
- " popq %r11\n" \
- " popq %r10\n" \
- " popq %r9\n" \
- " popq %r8\n" \
- " popq %rax\n" \
- " popq %rcx\n" \
- " popq %rdx\n" \
- " popq %rsi\n" \
- " popq %rdi\n" \
- /* Skip orig_ax, ip, cs */ \
- " addq $24, %rsp\n"
-#else
-#define SAVE_REGS_STRING \
- /* Skip cs, ip, orig_ax and gs. */ \
- " subl $16, %esp\n" \
- " pushl %fs\n" \
- " pushl %es\n" \
- " pushl %ds\n" \
- " pushl %eax\n" \
- " pushl %ebp\n" \
- " pushl %edi\n" \
- " pushl %esi\n" \
- " pushl %edx\n" \
- " pushl %ecx\n" \
- " pushl %ebx\n"
-#define RESTORE_REGS_STRING \
- " popl %ebx\n" \
- " popl %ecx\n" \
- " popl %edx\n" \
- " popl %esi\n" \
- " popl %edi\n" \
- " popl %ebp\n" \
- " popl %eax\n" \
- /* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
- " addl $24, %esp\n"
-#endif
-
-/* Ensure if the instruction can be boostable */
-extern int can_boost(kprobe_opcode_t *instruction);
-/* Recover instruction if given address is probed */
-extern unsigned long recover_probed_instruction(kprobe_opcode_t *buf,
- unsigned long addr);
-/*
- * Copy an instruction and adjust the displacement if the instruction
- * uses the %rip-relative addressing mode.
- */
-extern int __copy_instruction(u8 *dest, u8 *src);
-
-/* Generate a relative-jump/call instruction */
-extern void synthesize_reljump(void *from, void *to);
-extern void synthesize_relcall(void *from, void *to);
-
-#ifdef CONFIG_OPTPROBES
-extern int arch_init_optprobes(void);
-extern int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter);
-extern unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr);
-#else /* !CONFIG_OPTPROBES */
-static inline int arch_init_optprobes(void)
-{
- return 0;
-}
-static inline int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
-{
- return 0;
-}
-static inline unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr)
-{
- return addr;
-}
-#endif
-
-#ifdef CONFIG_KPROBES_ON_FTRACE
-extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb);
-#else
-static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- return 0;
-}
-#endif
-#endif
diff --git a/arch/x86/kernel/kprobes-ftrace.c b/arch/x86/kernel/kprobes-ftrace.c
deleted file mode 100644
index 70a81c7..0000000
--- a/arch/x86/kernel/kprobes-ftrace.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Dynamic Ftrace based Kprobes Optimization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) Hitachi Ltd., 2012
- */
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/preempt.h>
-#include <linux/ftrace.h>
-
-#include "kprobes-common.h"
-
-static int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- /*
- * Emulate singlestep (and also recover regs->ip)
- * as if there is a 5byte nop
- */
- regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
- if (unlikely(p->post_handler)) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- p->post_handler(p, regs, 0);
- }
- __this_cpu_write(current_kprobe, NULL);
- return 1;
-}
-
-int __kprobes skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- if (kprobe_ftrace(p))
- return __skip_singlestep(p, regs, kcb);
- else
- return 0;
-}
-
-/* Ftrace callback handler for kprobes */
-void __kprobes kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
- struct ftrace_ops *ops, struct pt_regs *regs)
-{
- struct kprobe *p;
- struct kprobe_ctlblk *kcb;
- unsigned long flags;
-
- /* Disable irq for emulating a breakpoint and avoiding preempt */
- local_irq_save(flags);
-
- p = get_kprobe((kprobe_opcode_t *)ip);
- if (unlikely(!p) || kprobe_disabled(p))
- goto end;
-
- kcb = get_kprobe_ctlblk();
- if (kprobe_running()) {
- kprobes_inc_nmissed_count(p);
- } else {
- /* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
- regs->ip = ip + sizeof(kprobe_opcode_t);
-
- __this_cpu_write(current_kprobe, p);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
- if (!p->pre_handler || !p->pre_handler(p, regs))
- __skip_singlestep(p, regs, kcb);
- /*
- * If pre_handler returns !0, it sets regs->ip and
- * resets current kprobe.
- */
- }
-end:
- local_irq_restore(flags);
-}
-
-int __kprobes arch_prepare_kprobe_ftrace(struct kprobe *p)
-{
- p->ainsn.insn = NULL;
- p->ainsn.boostable = -1;
- return 0;
-}
diff --git a/arch/x86/kernel/kprobes-opt.c b/arch/x86/kernel/kprobes-opt.c
deleted file mode 100644
index c5e410e..0000000
--- a/arch/x86/kernel/kprobes-opt.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * Kernel Probes Jump Optimization (Optprobes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- * Copyright (C) Hitachi Ltd., 2012
- */
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/hardirq.h>
-#include <linux/preempt.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-#include <linux/kallsyms.h>
-#include <linux/ftrace.h>
-
-#include <asm/cacheflush.h>
-#include <asm/desc.h>
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/alternative.h>
-#include <asm/insn.h>
-#include <asm/debugreg.h>
-
-#include "kprobes-common.h"
-
-unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr)
-{
- struct optimized_kprobe *op;
- struct kprobe *kp;
- long offs;
- int i;
-
- for (i = 0; i < RELATIVEJUMP_SIZE; i++) {
- kp = get_kprobe((void *)addr - i);
- /* This function only handles jump-optimized kprobe */
- if (kp && kprobe_optimized(kp)) {
- op = container_of(kp, struct optimized_kprobe, kp);
- /* If op->list is not empty, op is under optimizing */
- if (list_empty(&op->list))
- goto found;
- }
- }
-
- return addr;
-found:
- /*
- * If the kprobe can be optimized, original bytes which can be
- * overwritten by jump destination address. In this case, original
- * bytes must be recovered from op->optinsn.copied_insn buffer.
- */
- memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- if (addr == (unsigned long)kp->addr) {
- buf[0] = kp->opcode;
- memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
- } else {
- offs = addr - (unsigned long)kp->addr - 1;
- memcpy(buf, op->optinsn.copied_insn + offs, RELATIVE_ADDR_SIZE - offs);
- }
-
- return (unsigned long)buf;
-}
-
-/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */
-static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr, unsigned long val)
-{
-#ifdef CONFIG_X86_64
- *addr++ = 0x48;
- *addr++ = 0xbf;
-#else
- *addr++ = 0xb8;
-#endif
- *(unsigned long *)addr = val;
-}
-
-static void __used __kprobes kprobes_optinsn_template_holder(void)
-{
- asm volatile (
- ".global optprobe_template_entry\n"
- "optprobe_template_entry:\n"
-#ifdef CONFIG_X86_64
- /* We don't bother saving the ss register */
- " pushq %rsp\n"
- " pushfq\n"
- SAVE_REGS_STRING
- " movq %rsp, %rsi\n"
- ".global optprobe_template_val\n"
- "optprobe_template_val:\n"
- ASM_NOP5
- ASM_NOP5
- ".global optprobe_template_call\n"
- "optprobe_template_call:\n"
- ASM_NOP5
- /* Move flags to rsp */
- " movq 144(%rsp), %rdx\n"
- " movq %rdx, 152(%rsp)\n"
- RESTORE_REGS_STRING
- /* Skip flags entry */
- " addq $8, %rsp\n"
- " popfq\n"
-#else /* CONFIG_X86_32 */
- " pushf\n"
- SAVE_REGS_STRING
- " movl %esp, %edx\n"
- ".global optprobe_template_val\n"
- "optprobe_template_val:\n"
- ASM_NOP5
- ".global optprobe_template_call\n"
- "optprobe_template_call:\n"
- ASM_NOP5
- RESTORE_REGS_STRING
- " addl $4, %esp\n" /* skip cs */
- " popf\n"
-#endif
- ".global optprobe_template_end\n"
- "optprobe_template_end:\n");
-}
-
-#define TMPL_MOVE_IDX \
- ((long)&optprobe_template_val - (long)&optprobe_template_entry)
-#define TMPL_CALL_IDX \
- ((long)&optprobe_template_call - (long)&optprobe_template_entry)
-#define TMPL_END_IDX \
- ((long)&optprobe_template_end - (long)&optprobe_template_entry)
-
-#define INT3_SIZE sizeof(kprobe_opcode_t)
-
-/* Optimized kprobe call back function: called from optinsn */
-static void __kprobes optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
-{
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- unsigned long flags;
-
- /* This is possible if op is under delayed unoptimizing */
- if (kprobe_disabled(&op->kp))
- return;
-
- local_irq_save(flags);
- if (kprobe_running()) {
- kprobes_inc_nmissed_count(&op->kp);
- } else {
- /* Save skipped registers */
-#ifdef CONFIG_X86_64
- regs->cs = __KERNEL_CS;
-#else
- regs->cs = __KERNEL_CS | get_kernel_rpl();
- regs->gs = 0;
-#endif
- regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
- regs->orig_ax = ~0UL;
-
- __this_cpu_write(current_kprobe, &op->kp);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
- opt_pre_handler(&op->kp, regs);
- __this_cpu_write(current_kprobe, NULL);
- }
- local_irq_restore(flags);
-}
-
-static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
-{
- int len = 0, ret;
-
- while (len < RELATIVEJUMP_SIZE) {
- ret = __copy_instruction(dest + len, src + len);
- if (!ret || !can_boost(dest + len))
- return -EINVAL;
- len += ret;
- }
- /* Check whether the address range is reserved */
- if (ftrace_text_reserved(src, src + len - 1) ||
- alternatives_text_reserved(src, src + len - 1) ||
- jump_label_text_reserved(src, src + len - 1))
- return -EBUSY;
-
- return len;
-}
-
-/* Check whether insn is indirect jump */
-static int __kprobes insn_is_indirect_jump(struct insn *insn)
-{
- return ((insn->opcode.bytes[0] == 0xff &&
- (X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */
- insn->opcode.bytes[0] == 0xea); /* Segment based jump */
-}
-
-/* Check whether insn jumps into specified address range */
-static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
-{
- unsigned long target = 0;
-
- switch (insn->opcode.bytes[0]) {
- case 0xe0: /* loopne */
- case 0xe1: /* loope */
- case 0xe2: /* loop */
- case 0xe3: /* jcxz */
- case 0xe9: /* near relative jump */
- case 0xeb: /* short relative jump */
- break;
- case 0x0f:
- if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */
- break;
- return 0;
- default:
- if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */
- break;
- return 0;
- }
- target = (unsigned long)insn->next_byte + insn->immediate.value;
-
- return (start <= target && target <= start + len);
-}
-
-/* Decode whole function to ensure any instructions don't jump into target */
-static int __kprobes can_optimize(unsigned long paddr)
-{
- unsigned long addr, size = 0, offset = 0;
- struct insn insn;
- kprobe_opcode_t buf[MAX_INSN_SIZE];
-
- /* Lookup symbol including addr */
- if (!kallsyms_lookup_size_offset(paddr, &size, &offset))
- return 0;
-
- /*
- * Do not optimize in the entry code due to the unstable
- * stack handling.
- */
- if ((paddr >= (unsigned long)__entry_text_start) &&
- (paddr < (unsigned long)__entry_text_end))
- return 0;
-
- /* Check there is enough space for a relative jump. */
- if (size - offset < RELATIVEJUMP_SIZE)
- return 0;
-
- /* Decode instructions */
- addr = paddr - offset;
- while (addr < paddr - offset + size) { /* Decode until function end */
- if (search_exception_tables(addr))
- /*
- * Since some fixup code will jumps into this function,
- * we can't optimize kprobe in this function.
- */
- return 0;
- kernel_insn_init(&insn, (void *)recover_probed_instruction(buf, addr));
- insn_get_length(&insn);
- /* Another subsystem puts a breakpoint */
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
- return 0;
- /* Recover address */
- insn.kaddr = (void *)addr;
- insn.next_byte = (void *)(addr + insn.length);
- /* Check any instructions don't jump into target */
- if (insn_is_indirect_jump(&insn) ||
- insn_jump_into_range(&insn, paddr + INT3_SIZE,
- RELATIVE_ADDR_SIZE))
- return 0;
- addr += insn.length;
- }
-
- return 1;
-}
-
-/* Check optimized_kprobe can actually be optimized. */
-int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op)
-{
- int i;
- struct kprobe *p;
-
- for (i = 1; i < op->optinsn.size; i++) {
- p = get_kprobe(op->kp.addr + i);
- if (p && !kprobe_disabled(p))
- return -EEXIST;
- }
-
- return 0;
-}
-
-/* Check the addr is within the optimized instructions. */
-int __kprobes
-arch_within_optimized_kprobe(struct optimized_kprobe *op, unsigned long addr)
-{
- return ((unsigned long)op->kp.addr <= addr &&
- (unsigned long)op->kp.addr + op->optinsn.size > addr);
-}
-
-/* Free optimized instruction slot */
-static __kprobes
-void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
-{
- if (op->optinsn.insn) {
- free_optinsn_slot(op->optinsn.insn, dirty);
- op->optinsn.insn = NULL;
- op->optinsn.size = 0;
- }
-}
-
-void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
-{
- __arch_remove_optimized_kprobe(op, 1);
-}
-
-/*
- * Copy replacing target instructions
- * Target instructions MUST be relocatable (checked inside)
- * This is called when new aggr(opt)probe is allocated or reused.
- */
-int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
-{
- u8 *buf;
- int ret;
- long rel;
-
- if (!can_optimize((unsigned long)op->kp.addr))
- return -EILSEQ;
-
- op->optinsn.insn = get_optinsn_slot();
- if (!op->optinsn.insn)
- return -ENOMEM;
-
- /*
- * Verify if the address gap is in 2GB range, because this uses
- * a relative jump.
- */
- rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE;
- if (abs(rel) > 0x7fffffff)
- return -ERANGE;
-
- buf = (u8 *)op->optinsn.insn;
-
- /* Copy instructions into the out-of-line buffer */
- ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
- if (ret < 0) {
- __arch_remove_optimized_kprobe(op, 0);
- return ret;
- }
- op->optinsn.size = ret;
-
- /* Copy arch-dep-instance from template */
- memcpy(buf, &optprobe_template_entry, TMPL_END_IDX);
-
- /* Set probe information */
- synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op);
-
- /* Set probe function call */
- synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback);
-
- /* Set returning jmp instruction at the tail of out-of-line buffer */
- synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
- (u8 *)op->kp.addr + op->optinsn.size);
-
- flush_icache_range((unsigned long) buf,
- (unsigned long) buf + TMPL_END_IDX +
- op->optinsn.size + RELATIVEJUMP_SIZE);
- return 0;
-}
-
-#define MAX_OPTIMIZE_PROBES 256
-static struct text_poke_param *jump_poke_params;
-static struct jump_poke_buffer {
- u8 buf[RELATIVEJUMP_SIZE];
-} *jump_poke_bufs;
-
-static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
- u8 *insn_buf,
- struct optimized_kprobe *op)
-{
- s32 rel = (s32)((long)op->optinsn.insn -
- ((long)op->kp.addr + RELATIVEJUMP_SIZE));
-
- /* Backup instructions which will be replaced by jump address */
- memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
- RELATIVE_ADDR_SIZE);
-
- insn_buf[0] = RELATIVEJUMP_OPCODE;
- *(s32 *)(&insn_buf[1]) = rel;
-
- tprm->addr = op->kp.addr;
- tprm->opcode = insn_buf;
- tprm->len = RELATIVEJUMP_SIZE;
-}
-
-/*
- * Replace breakpoints (int3) with relative jumps.
- * Caller must call with locking kprobe_mutex and text_mutex.
- */
-void __kprobes arch_optimize_kprobes(struct list_head *oplist)
-{
- struct optimized_kprobe *op, *tmp;
- int c = 0;
-
- list_for_each_entry_safe(op, tmp, oplist, list) {
- WARN_ON(kprobe_disabled(&op->kp));
- /* Setup param */
- setup_optimize_kprobe(&jump_poke_params[c],
- jump_poke_bufs[c].buf, op);
- list_del_init(&op->list);
- if (++c >= MAX_OPTIMIZE_PROBES)
- break;
- }
-
- /*
- * text_poke_smp doesn't support NMI/MCE code modifying.
- * However, since kprobes itself also doesn't support NMI/MCE
- * code probing, it's not a problem.
- */
- text_poke_smp_batch(jump_poke_params, c);
-}
-
-static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm,
- u8 *insn_buf,
- struct optimized_kprobe *op)
-{
- /* Set int3 to first byte for kprobes */
- insn_buf[0] = BREAKPOINT_INSTRUCTION;
- memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
-
- tprm->addr = op->kp.addr;
- tprm->opcode = insn_buf;
- tprm->len = RELATIVEJUMP_SIZE;
-}
-
-/*
- * Recover original instructions and breakpoints from relative jumps.
- * Caller must call with locking kprobe_mutex.
- */
-extern void arch_unoptimize_kprobes(struct list_head *oplist,
- struct list_head *done_list)
-{
- struct optimized_kprobe *op, *tmp;
- int c = 0;
-
- list_for_each_entry_safe(op, tmp, oplist, list) {
- /* Setup param */
- setup_unoptimize_kprobe(&jump_poke_params[c],
- jump_poke_bufs[c].buf, op);
- list_move(&op->list, done_list);
- if (++c >= MAX_OPTIMIZE_PROBES)
- break;
- }
-
- /*
- * text_poke_smp doesn't support NMI/MCE code modifying.
- * However, since kprobes itself also doesn't support NMI/MCE
- * code probing, it's not a problem.
- */
- text_poke_smp_batch(jump_poke_params, c);
-}
-
-/* Replace a relative jump with a breakpoint (int3). */
-void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
-{
- u8 buf[RELATIVEJUMP_SIZE];
-
- /* Set int3 to first byte for kprobes */
- buf[0] = BREAKPOINT_INSTRUCTION;
- memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
- text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
-}
-
-int __kprobes
-setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
-{
- struct optimized_kprobe *op;
-
- if (p->flags & KPROBE_FLAG_OPTIMIZED) {
- /* This kprobe is really able to run optimized path. */
- op = container_of(p, struct optimized_kprobe, kp);
- /* Detour through copied instructions */
- regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
- if (!reenter)
- reset_current_kprobe();
- preempt_enable_no_resched();
- return 1;
- }
- return 0;
-}
-
-int __kprobes arch_init_optprobes(void)
-{
- /* Allocate code buffer and parameter array */
- jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) *
- MAX_OPTIMIZE_PROBES, GFP_KERNEL);
- if (!jump_poke_bufs)
- return -ENOMEM;
-
- jump_poke_params = kmalloc(sizeof(struct text_poke_param) *
- MAX_OPTIMIZE_PROBES, GFP_KERNEL);
- if (!jump_poke_params) {
- kfree(jump_poke_bufs);
- jump_poke_bufs = NULL;
- return -ENOMEM;
- }
-
- return 0;
-}
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
deleted file mode 100644
index 18114bf..0000000
--- a/arch/x86/kernel/kprobes.c
+++ /dev/null
@@ -1,1064 +0,0 @@
-/*
- * Kernel Probes (KProbes)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- * Probes initial implementation ( includes contributions from
- * Rusty Russell).
- * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
- * interface to access function arguments.
- * 2004-Oct Jim Keniston <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
- * <prasanna@in.ibm.com> adapted for x86_64 from i386.
- * 2005-Mar Roland McGrath <roland@redhat.com>
- * Fixed to handle %rip-relative addressing mode correctly.
- * 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston
- * <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
- * <prasanna@in.ibm.com> added function-return probes.
- * 2005-May Rusty Lynch <rusty.lynch@intel.com>
- * Added function return probes functionality
- * 2006-Feb Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> added
- * kprobe-booster and kretprobe-booster for i386.
- * 2007-Dec Masami Hiramatsu <mhiramat@redhat.com> added kprobe-booster
- * and kretprobe-booster for x86-64
- * 2007-Dec Masami Hiramatsu <mhiramat@redhat.com>, Arjan van de Ven
- * <arjan@infradead.org> and Jim Keniston <jkenisto@us.ibm.com>
- * unified x86 kprobes code.
- */
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/hardirq.h>
-#include <linux/preempt.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-#include <linux/kallsyms.h>
-#include <linux/ftrace.h>
-
-#include <asm/cacheflush.h>
-#include <asm/desc.h>
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/alternative.h>
-#include <asm/insn.h>
-#include <asm/debugreg.h>
-
-#include "kprobes-common.h"
-
-void jprobe_return_end(void);
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-#define stack_addr(regs) ((unsigned long *)kernel_stack_pointer(regs))
-
-#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
- (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \
- (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \
- (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \
- (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \
- << (row % 32))
- /*
- * Undefined/reserved opcodes, conditional jump, Opcode Extension
- * Groups, and some special opcodes can not boost.
- * This is non-const and volatile to keep gcc from statically
- * optimizing it out, as variable_test_bit makes gcc think only
- * *(unsigned long*) is used.
- */
-static volatile u32 twobyte_is_boostable[256 / 32] = {
- /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
- /* ---------------------------------------------- */
- W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */
- W(0x10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 10 */
- W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 20 */
- W(0x30, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
- W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
- W(0x50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 50 */
- W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1) | /* 60 */
- W(0x70, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
- W(0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 80 */
- W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
- W(0xa0, 1, 1, 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* a0 */
- W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1) , /* b0 */
- W(0xc0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
- W(0xd0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) , /* d0 */
- W(0xe0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* e0 */
- W(0xf0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0) /* f0 */
- /* ----------------------------------------------- */
- /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
-};
-#undef W
-
-struct kretprobe_blackpoint kretprobe_blacklist[] = {
- {"__switch_to", }, /* This function switches only current task, but
- doesn't switch kernel stack.*/
- {NULL, NULL} /* Terminator */
-};
-
-const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
-
-static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op)
-{
- struct __arch_relative_insn {
- u8 op;
- s32 raddr;
- } __attribute__((packed)) *insn;
-
- insn = (struct __arch_relative_insn *)from;
- insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
- insn->op = op;
-}
-
-/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
-void __kprobes synthesize_reljump(void *from, void *to)
-{
- __synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE);
-}
-
-/* Insert a call instruction at address 'from', which calls address 'to'.*/
-void __kprobes synthesize_relcall(void *from, void *to)
-{
- __synthesize_relative_insn(from, to, RELATIVECALL_OPCODE);
-}
-
-/*
- * Skip the prefixes of the instruction.
- */
-static kprobe_opcode_t *__kprobes skip_prefixes(kprobe_opcode_t *insn)
-{
- insn_attr_t attr;
-
- attr = inat_get_opcode_attribute((insn_byte_t)*insn);
- while (inat_is_legacy_prefix(attr)) {
- insn++;
- attr = inat_get_opcode_attribute((insn_byte_t)*insn);
- }
-#ifdef CONFIG_X86_64
- if (inat_is_rex_prefix(attr))
- insn++;
-#endif
- return insn;
-}
-
-/*
- * Returns non-zero if opcode is boostable.
- * RIP relative instructions are adjusted at copying time in 64 bits mode
- */
-int __kprobes can_boost(kprobe_opcode_t *opcodes)
-{
- kprobe_opcode_t opcode;
- kprobe_opcode_t *orig_opcodes = opcodes;
-
- if (search_exception_tables((unsigned long)opcodes))
- return 0; /* Page fault may occur on this address. */
-
-retry:
- if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
- return 0;
- opcode = *(opcodes++);
-
- /* 2nd-byte opcode */
- if (opcode == 0x0f) {
- if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
- return 0;
- return test_bit(*opcodes,
- (unsigned long *)twobyte_is_boostable);
- }
-
- switch (opcode & 0xf0) {
-#ifdef CONFIG_X86_64
- case 0x40:
- goto retry; /* REX prefix is boostable */
-#endif
- case 0x60:
- if (0x63 < opcode && opcode < 0x67)
- goto retry; /* prefixes */
- /* can't boost Address-size override and bound */
- return (opcode != 0x62 && opcode != 0x67);
- case 0x70:
- return 0; /* can't boost conditional jump */
- case 0xc0:
- /* can't boost software-interruptions */
- return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf;
- case 0xd0:
- /* can boost AA* and XLAT */
- return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7);
- case 0xe0:
- /* can boost in/out and absolute jmps */
- return ((opcode & 0x04) || opcode == 0xea);
- case 0xf0:
- if ((opcode & 0x0c) == 0 && opcode != 0xf1)
- goto retry; /* lock/rep(ne) prefix */
- /* clear and set flags are boostable */
- return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe));
- default:
- /* segment override prefixes are boostable */
- if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e)
- goto retry; /* prefixes */
- /* CS override prefix and call are not boostable */
- return (opcode != 0x2e && opcode != 0x9a);
- }
-}
-
-static unsigned long
-__recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
-{
- struct kprobe *kp;
-
- kp = get_kprobe((void *)addr);
- /* There is no probe, return original address */
- if (!kp)
- return addr;
-
- /*
- * Basically, kp->ainsn.insn has an original instruction.
- * However, RIP-relative instruction can not do single-stepping
- * at different place, __copy_instruction() tweaks the displacement of
- * that instruction. In that case, we can't recover the instruction
- * from the kp->ainsn.insn.
- *
- * On the other hand, kp->opcode has a copy of the first byte of
- * the probed instruction, which is overwritten by int3. And
- * the instruction at kp->addr is not modified by kprobes except
- * for the first byte, we can recover the original instruction
- * from it and kp->opcode.
- */
- memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- buf[0] = kp->opcode;
- return (unsigned long)buf;
-}
-
-/*
- * Recover the probed instruction at addr for further analysis.
- * Caller must lock kprobes by kprobe_mutex, or disable preemption
- * for preventing to release referencing kprobes.
- */
-unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
-{
- unsigned long __addr;
-
- __addr = __recover_optprobed_insn(buf, addr);
- if (__addr != addr)
- return __addr;
-
- return __recover_probed_insn(buf, addr);
-}
-
-/* Check if paddr is at an instruction boundary */
-static int __kprobes can_probe(unsigned long paddr)
-{
- unsigned long addr, __addr, offset = 0;
- struct insn insn;
- kprobe_opcode_t buf[MAX_INSN_SIZE];
-
- if (!kallsyms_lookup_size_offset(paddr, NULL, &offset))
- return 0;
-
- /* Decode instructions */
- addr = paddr - offset;
- while (addr < paddr) {
- /*
- * Check if the instruction has been modified by another
- * kprobe, in which case we replace the breakpoint by the
- * original instruction in our buffer.
- * Also, jump optimization will change the breakpoint to
- * relative-jump. Since the relative-jump itself is
- * normally used, we just go through if there is no kprobe.
- */
- __addr = recover_probed_instruction(buf, addr);
- kernel_insn_init(&insn, (void *)__addr);
- insn_get_length(&insn);
-
- /*
- * Another debugging subsystem might insert this breakpoint.
- * In that case, we can't recover it.
- */
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
- return 0;
- addr += insn.length;
- }
-
- return (addr == paddr);
-}
-
-/*
- * Returns non-zero if opcode modifies the interrupt flag.
- */
-static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
-{
- /* Skip prefixes */
- insn = skip_prefixes(insn);
-
- switch (*insn) {
- case 0xfa: /* cli */
- case 0xfb: /* sti */
- case 0xcf: /* iret/iretd */
- case 0x9d: /* popf/popfd */
- return 1;
- }
-
- return 0;
-}
-
-/*
- * Copy an instruction and adjust the displacement if the instruction
- * uses the %rip-relative addressing mode.
- * If it does, Return the address of the 32-bit displacement word.
- * If not, return null.
- * Only applicable to 64-bit x86.
- */
-int __kprobes __copy_instruction(u8 *dest, u8 *src)
-{
- struct insn insn;
- kprobe_opcode_t buf[MAX_INSN_SIZE];
-
- kernel_insn_init(&insn, (void *)recover_probed_instruction(buf, (unsigned long)src));
- insn_get_length(&insn);
- /* Another subsystem puts a breakpoint, failed to recover */
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
- return 0;
- memcpy(dest, insn.kaddr, insn.length);
-
-#ifdef CONFIG_X86_64
- if (insn_rip_relative(&insn)) {
- s64 newdisp;
- u8 *disp;
- kernel_insn_init(&insn, dest);
- insn_get_displacement(&insn);
- /*
- * The copied instruction uses the %rip-relative addressing
- * mode. Adjust the displacement for the difference between
- * the original location of this instruction and the location
- * of the copy that will actually be run. The tricky bit here
- * is making sure that the sign extension happens correctly in
- * this calculation, since we need a signed 32-bit result to
- * be sign-extended to 64 bits when it's added to the %rip
- * value and yield the same 64-bit result that the sign-
- * extension of the original signed 32-bit displacement would
- * have given.
- */
- newdisp = (u8 *) src + (s64) insn.displacement.value - (u8 *) dest;
- BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
- disp = (u8 *) dest + insn_offset_displacement(&insn);
- *(s32 *) disp = (s32) newdisp;
- }
-#endif
- return insn.length;
-}
-
-static void __kprobes arch_copy_kprobe(struct kprobe *p)
-{
- /* Copy an instruction with recovering if other optprobe modifies it.*/
- __copy_instruction(p->ainsn.insn, p->addr);
-
- /*
- * __copy_instruction can modify the displacement of the instruction,
- * but it doesn't affect boostable check.
- */
- if (can_boost(p->ainsn.insn))
- p->ainsn.boostable = 0;
- else
- p->ainsn.boostable = -1;
-
- /* Also, displacement change doesn't affect the first byte */
- p->opcode = p->ainsn.insn[0];
-}
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
- if (alternatives_text_reserved(p->addr, p->addr))
- return -EINVAL;
-
- if (!can_probe((unsigned long)p->addr))
- return -EILSEQ;
- /* insn: must be on special executable page on x86. */
- p->ainsn.insn = get_insn_slot();
- if (!p->ainsn.insn)
- return -ENOMEM;
- arch_copy_kprobe(p);
- return 0;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
- text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1);
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
- text_poke(p->addr, &p->opcode, 1);
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
- if (p->ainsn.insn) {
- free_insn_slot(p->ainsn.insn, (p->ainsn.boostable == 1));
- p->ainsn.insn = NULL;
- }
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- kcb->prev_kprobe.kp = kprobe_running();
- kcb->prev_kprobe.status = kcb->kprobe_status;
- kcb->prev_kprobe.old_flags = kcb->kprobe_old_flags;
- kcb->prev_kprobe.saved_flags = kcb->kprobe_saved_flags;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
- kcb->kprobe_status = kcb->prev_kprobe.status;
- kcb->kprobe_old_flags = kcb->prev_kprobe.old_flags;
- kcb->kprobe_saved_flags = kcb->prev_kprobe.saved_flags;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- __this_cpu_write(current_kprobe, p);
- kcb->kprobe_saved_flags = kcb->kprobe_old_flags
- = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
- if (is_IF_modifier(p->ainsn.insn))
- kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
-}
-
-static void __kprobes clear_btf(void)
-{
- if (test_thread_flag(TIF_BLOCKSTEP)) {
- unsigned long debugctl = get_debugctlmsr();
-
- debugctl &= ~DEBUGCTLMSR_BTF;
- update_debugctlmsr(debugctl);
- }
-}
-
-static void __kprobes restore_btf(void)
-{
- if (test_thread_flag(TIF_BLOCKSTEP)) {
- unsigned long debugctl = get_debugctlmsr();
-
- debugctl |= DEBUGCTLMSR_BTF;
- update_debugctlmsr(debugctl);
- }
-}
-
-void __kprobes
-arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- unsigned long *sara = stack_addr(regs);
-
- ri->ret_addr = (kprobe_opcode_t *) *sara;
-
- /* Replace the return addr with trampoline addr */
- *sara = (unsigned long) &kretprobe_trampoline;
-}
-
-static void __kprobes
-setup_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb, int reenter)
-{
- if (setup_detour_execution(p, regs, reenter))
- return;
-
-#if !defined(CONFIG_PREEMPT)
- if (p->ainsn.boostable == 1 && !p->post_handler) {
- /* Boost up -- we can execute copied instructions directly */
- if (!reenter)
- reset_current_kprobe();
- /*
- * Reentering boosted probe doesn't reset current_kprobe,
- * nor set current_kprobe, because it doesn't use single
- * stepping.
- */
- regs->ip = (unsigned long)p->ainsn.insn;
- preempt_enable_no_resched();
- return;
- }
-#endif
- if (reenter) {
- save_previous_kprobe(kcb);
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_REENTER;
- } else
- kcb->kprobe_status = KPROBE_HIT_SS;
- /* Prepare real single stepping */
- clear_btf();
- regs->flags |= X86_EFLAGS_TF;
- regs->flags &= ~X86_EFLAGS_IF;
- /* single step inline if the instruction is an int3 */
- if (p->opcode == BREAKPOINT_INSTRUCTION)
- regs->ip = (unsigned long)p->addr;
- else
- regs->ip = (unsigned long)p->ainsn.insn;
-}
-
-/*
- * We have reentered the kprobe_handler(), since another probe was hit while
- * within the handler. We save the original kprobes variables and just single
- * step on the instruction of the new probe without calling any user handlers.
- */
-static int __kprobes
-reenter_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
-{
- switch (kcb->kprobe_status) {
- case KPROBE_HIT_SSDONE:
- case KPROBE_HIT_ACTIVE:
- kprobes_inc_nmissed_count(p);
- setup_singlestep(p, regs, kcb, 1);
- break;
- case KPROBE_HIT_SS:
- /* A probe has been hit in the codepath leading up to, or just
- * after, single-stepping of a probed instruction. This entire
- * codepath should strictly reside in .kprobes.text section.
- * Raise a BUG or we'll continue in an endless reentering loop
- * and eventually a stack overflow.
- */
- printk(KERN_WARNING "Unrecoverable kprobe detected at %p.\n",
- p->addr);
- dump_kprobe(p);
- BUG();
- default:
- /* impossible cases */
- WARN_ON(1);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled throughout this function.
- */
-static int __kprobes kprobe_handler(struct pt_regs *regs)
-{
- kprobe_opcode_t *addr;
- struct kprobe *p;
- struct kprobe_ctlblk *kcb;
-
- addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
- /*
- * We don't want to be preempted for the entire
- * duration of kprobe processing. We conditionally
- * re-enable preemption at the end of this function,
- * and also in reenter_kprobe() and setup_singlestep().
- */
- preempt_disable();
-
- kcb = get_kprobe_ctlblk();
- p = get_kprobe(addr);
-
- if (p) {
- if (kprobe_running()) {
- if (reenter_kprobe(p, regs, kcb))
- return 1;
- } else {
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
- /*
- * If we have no pre-handler or it returned 0, we
- * continue with normal processing. If we have a
- * pre-handler and it returned non-zero, it prepped
- * for calling the break_handler below on re-entry
- * for jprobe processing, so get out doing nothing
- * more here.
- */
- if (!p->pre_handler || !p->pre_handler(p, regs))
- setup_singlestep(p, regs, kcb, 0);
- return 1;
- }
- } else if (*addr != BREAKPOINT_INSTRUCTION) {
- /*
- * The breakpoint instruction was removed right
- * after we hit it. Another cpu has removed
- * either a probepoint or a debugger breakpoint
- * at this address. In either case, no further
- * handling of this interrupt is appropriate.
- * Back up over the (now missing) int3 and run
- * the original instruction.
- */
- regs->ip = (unsigned long)addr;
- preempt_enable_no_resched();
- return 1;
- } else if (kprobe_running()) {
- p = __this_cpu_read(current_kprobe);
- if (p->break_handler && p->break_handler(p, regs)) {
- if (!skip_singlestep(p, regs, kcb))
- setup_singlestep(p, regs, kcb, 0);
- return 1;
- }
- } /* else: not a kprobe fault; let the kernel handle it */
-
- preempt_enable_no_resched();
- return 0;
-}
-
-/*
- * When a retprobed function returns, this code saves registers and
- * calls trampoline_handler() runs, which calls the kretprobe's handler.
- */
-static void __used __kprobes kretprobe_trampoline_holder(void)
-{
- asm volatile (
- ".global kretprobe_trampoline\n"
- "kretprobe_trampoline: \n"
-#ifdef CONFIG_X86_64
- /* We don't bother saving the ss register */
- " pushq %rsp\n"
- " pushfq\n"
- SAVE_REGS_STRING
- " movq %rsp, %rdi\n"
- " call trampoline_handler\n"
- /* Replace saved sp with true return address. */
- " movq %rax, 152(%rsp)\n"
- RESTORE_REGS_STRING
- " popfq\n"
-#else
- " pushf\n"
- SAVE_REGS_STRING
- " movl %esp, %eax\n"
- " call trampoline_handler\n"
- /* Move flags to cs */
- " movl 56(%esp), %edx\n"
- " movl %edx, 52(%esp)\n"
- /* Replace saved flags with true return address. */
- " movl %eax, 56(%esp)\n"
- RESTORE_REGS_STRING
- " popf\n"
-#endif
- " ret\n");
-}
-
-/*
- * Called from kretprobe_trampoline
- */
-static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
-{
- struct kretprobe_instance *ri = NULL;
- struct hlist_head *head, empty_rp;
- struct hlist_node *node, *tmp;
- unsigned long flags, orig_ret_address = 0;
- unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
- kprobe_opcode_t *correct_ret_addr = NULL;
-
- INIT_HLIST_HEAD(&empty_rp);
- kretprobe_hash_lock(current, &head, &flags);
- /* fixup registers */
-#ifdef CONFIG_X86_64
- regs->cs = __KERNEL_CS;
-#else
- regs->cs = __KERNEL_CS | get_kernel_rpl();
- regs->gs = 0;
-#endif
- regs->ip = trampoline_address;
- regs->orig_ax = ~0UL;
-
- /*
- * It is possible to have multiple instances associated with a given
- * task either because multiple functions in the call path have
- * return probes installed on them, and/or more than one
- * return probe was registered for a target function.
- *
- * We can handle this because:
- * - instances are always pushed into the head of the list
- * - when multiple return probes are registered for the same
- * function, the (chronologically) first instance's ret_addr
- * will be the real return address, and all the rest will
- * point to kretprobe_trampoline.
- */
- hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
- if (ri->task != current)
- /* another task is sharing our hash bucket */
- continue;
-
- orig_ret_address = (unsigned long)ri->ret_addr;
-
- if (orig_ret_address != trampoline_address)
- /*
- * This is the real return address. Any other
- * instances associated with this task are for
- * other calls deeper on the call stack
- */
- break;
- }
-
- kretprobe_assert(ri, orig_ret_address, trampoline_address);
-
- correct_ret_addr = ri->ret_addr;
- hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
- if (ri->task != current)
- /* another task is sharing our hash bucket */
- continue;
-
- orig_ret_address = (unsigned long)ri->ret_addr;
- if (ri->rp && ri->rp->handler) {
- __this_cpu_write(current_kprobe, &ri->rp->kp);
- get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
- ri->ret_addr = correct_ret_addr;
- ri->rp->handler(ri, regs);
- __this_cpu_write(current_kprobe, NULL);
- }
-
- recycle_rp_inst(ri, &empty_rp);
-
- if (orig_ret_address != trampoline_address)
- /*
- * This is the real return address. Any other
- * instances associated with this task are for
- * other calls deeper on the call stack
- */
- break;
- }
-
- kretprobe_hash_unlock(current, &flags);
-
- hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
- hlist_del(&ri->hlist);
- kfree(ri);
- }
- return (void *)orig_ret_address;
-}
-
-/*
- * Called after single-stepping. p->addr is the address of the
- * instruction whose first byte has been replaced by the "int 3"
- * instruction. To avoid the SMP problems that can occur when we
- * temporarily put back the original opcode to single-step, we
- * single-stepped a copy of the instruction. The address of this
- * copy is p->ainsn.insn.
- *
- * This function prepares to return from the post-single-step
- * interrupt. We have to fix up the stack as follows:
- *
- * 0) Except in the case of absolute or indirect jump or call instructions,
- * the new ip is relative to the copied instruction. We need to make
- * it relative to the original instruction.
- *
- * 1) If the single-stepped instruction was pushfl, then the TF and IF
- * flags are set in the just-pushed flags, and may need to be cleared.
- *
- * 2) If the single-stepped instruction was a call, the return address
- * that is atop the stack is the address following the copied instruction.
- * We need to make it the address following the original instruction.
- *
- * If this is the first time we've single-stepped the instruction at
- * this probepoint, and the instruction is boostable, boost it: add a
- * jump instruction after the copied instruction, that jumps to the next
- * instruction after the probepoint.
- */
-static void __kprobes
-resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
-{
- unsigned long *tos = stack_addr(regs);
- unsigned long copy_ip = (unsigned long)p->ainsn.insn;
- unsigned long orig_ip = (unsigned long)p->addr;
- kprobe_opcode_t *insn = p->ainsn.insn;
-
- /* Skip prefixes */
- insn = skip_prefixes(insn);
-
- regs->flags &= ~X86_EFLAGS_TF;
- switch (*insn) {
- case 0x9c: /* pushfl */
- *tos &= ~(X86_EFLAGS_TF | X86_EFLAGS_IF);
- *tos |= kcb->kprobe_old_flags;
- break;
- case 0xc2: /* iret/ret/lret */
- case 0xc3:
- case 0xca:
- case 0xcb:
- case 0xcf:
- case 0xea: /* jmp absolute -- ip is correct */
- /* ip is already adjusted, no more changes required */
- p->ainsn.boostable = 1;
- goto no_change;
- case 0xe8: /* call relative - Fix return addr */
- *tos = orig_ip + (*tos - copy_ip);
- break;
-#ifdef CONFIG_X86_32
- case 0x9a: /* call absolute -- same as call absolute, indirect */
- *tos = orig_ip + (*tos - copy_ip);
- goto no_change;
-#endif
- case 0xff:
- if ((insn[1] & 0x30) == 0x10) {
- /*
- * call absolute, indirect
- * Fix return addr; ip is correct.
- * But this is not boostable
- */
- *tos = orig_ip + (*tos - copy_ip);
- goto no_change;
- } else if (((insn[1] & 0x31) == 0x20) ||
- ((insn[1] & 0x31) == 0x21)) {
- /*
- * jmp near and far, absolute indirect
- * ip is correct. And this is boostable
- */
- p->ainsn.boostable = 1;
- goto no_change;
- }
- default:
- break;
- }
-
- if (p->ainsn.boostable == 0) {
- if ((regs->ip > copy_ip) &&
- (regs->ip - copy_ip) + 5 < MAX_INSN_SIZE) {
- /*
- * These instructions can be executed directly if it
- * jumps back to correct address.
- */
- synthesize_reljump((void *)regs->ip,
- (void *)orig_ip + (regs->ip - copy_ip));
- p->ainsn.boostable = 1;
- } else {
- p->ainsn.boostable = -1;
- }
- }
-
- regs->ip += orig_ip - copy_ip;
-
-no_change:
- restore_btf();
-}
-
-/*
- * Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled throughout this function.
- */
-static int __kprobes post_kprobe_handler(struct pt_regs *regs)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- if (!cur)
- return 0;
-
- resume_execution(cur, regs, kcb);
- regs->flags |= kcb->kprobe_saved_flags;
-
- if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
- kcb->kprobe_status = KPROBE_HIT_SSDONE;
- cur->post_handler(cur, regs, 0);
- }
-
- /* Restore back the original saved kprobes variables and continue. */
- if (kcb->kprobe_status == KPROBE_REENTER) {
- restore_previous_kprobe(kcb);
- goto out;
- }
- reset_current_kprobe();
-out:
- preempt_enable_no_resched();
-
- /*
- * if somebody else is singlestepping across a probe point, flags
- * will have TF set, in which case, continue the remaining processing
- * of do_debug, as if this is not a probe hit.
- */
- if (regs->flags & X86_EFLAGS_TF)
- return 0;
-
- return 1;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
- struct kprobe *cur = kprobe_running();
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- switch (kcb->kprobe_status) {
- case KPROBE_HIT_SS:
- case KPROBE_REENTER:
- /*
- * We are here because the instruction being single
- * stepped caused a page fault. We reset the current
- * kprobe and the ip points back to the probe address
- * and allow the page fault handler to continue as a
- * normal page fault.
- */
- regs->ip = (unsigned long)cur->addr;
- regs->flags |= kcb->kprobe_old_flags;
- if (kcb->kprobe_status == KPROBE_REENTER)
- restore_previous_kprobe(kcb);
- else
- reset_current_kprobe();
- preempt_enable_no_resched();
- break;
- case KPROBE_HIT_ACTIVE:
- case KPROBE_HIT_SSDONE:
- /*
- * We increment the nmissed count for accounting,
- * we can also use npre/npostfault count for accounting
- * these specific fault cases.
- */
- kprobes_inc_nmissed_count(cur);
-
- /*
- * We come here because instructions in the pre/post
- * handler caused the page_fault, this could happen
- * if handler tries to access user space by
- * copy_from_user(), get_user() etc. Let the
- * user-specified handler try to fix it first.
- */
- if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
- return 1;
-
- /*
- * In case the user-specified fault handler returned
- * zero, try to fix up.
- */
- if (fixup_exception(regs))
- return 1;
-
- /*
- * fixup routine could not handle it,
- * Let do_page_fault() fix it.
- */
- break;
- default:
- break;
- }
- return 0;
-}
-
-/*
- * Wrapper routine for handling exceptions.
- */
-int __kprobes
-kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data)
-{
- struct die_args *args = data;
- int ret = NOTIFY_DONE;
-
- if (args->regs && user_mode_vm(args->regs))
- return ret;
-
- switch (val) {
- case DIE_INT3:
- if (kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- break;
- case DIE_DEBUG:
- if (post_kprobe_handler(args->regs)) {
- /*
- * Reset the BS bit in dr6 (pointed by args->err) to
- * denote completion of processing
- */
- (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
- ret = NOTIFY_STOP;
- }
- break;
- case DIE_GPF:
- /*
- * To be potentially processing a kprobe fault and to
- * trust the result from kprobe_running(), we have
- * be non-preemptible.
- */
- if (!preemptible() && kprobe_running() &&
- kprobe_fault_handler(args->regs, args->trapnr))
- ret = NOTIFY_STOP;
- break;
- default:
- break;
- }
- return ret;
-}
-
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
- struct jprobe *jp = container_of(p, struct jprobe, kp);
- unsigned long addr;
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- kcb->jprobe_saved_regs = *regs;
- kcb->jprobe_saved_sp = stack_addr(regs);
- addr = (unsigned long)(kcb->jprobe_saved_sp);
-
- /*
- * As Linus pointed out, gcc assumes that the callee
- * owns the argument space and could overwrite it, e.g.
- * tailcall optimization. So, to be absolutely safe
- * we also save and restore enough stack bytes to cover
- * the argument area.
- */
- memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
- MIN_STACK_SIZE(addr));
- regs->flags &= ~X86_EFLAGS_IF;
- trace_hardirqs_off();
- regs->ip = (unsigned long)(jp->entry);
- return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
- asm volatile (
-#ifdef CONFIG_X86_64
- " xchg %%rbx,%%rsp \n"
-#else
- " xchgl %%ebx,%%esp \n"
-#endif
- " int3 \n"
- " .globl jprobe_return_end\n"
- " jprobe_return_end: \n"
- " nop \n"::"b"
- (kcb->jprobe_saved_sp):"memory");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
- struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
- u8 *addr = (u8 *) (regs->ip - 1);
- struct jprobe *jp = container_of(p, struct jprobe, kp);
-
- if ((addr > (u8 *) jprobe_return) &&
- (addr < (u8 *) jprobe_return_end)) {
- if (stack_addr(regs) != kcb->jprobe_saved_sp) {
- struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
- printk(KERN_ERR
- "current sp %p does not match saved sp %p\n",
- stack_addr(regs), kcb->jprobe_saved_sp);
- printk(KERN_ERR "Saved registers for jprobe %p\n", jp);
- show_regs(saved_regs);
- printk(KERN_ERR "Current registers\n");
- show_regs(regs);
- BUG();
- }
- *regs = kcb->jprobe_saved_regs;
- memcpy((kprobe_opcode_t *)(kcb->jprobe_saved_sp),
- kcb->jprobes_stack,
- MIN_STACK_SIZE(kcb->jprobe_saved_sp));
- preempt_enable_no_resched();
- return 1;
- }
- return 0;
-}
-
-int __init arch_init_kprobes(void)
-{
- return arch_init_optprobes();
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
- return 0;
-}
diff --git a/arch/x86/kernel/kprobes/Makefile b/arch/x86/kernel/kprobes/Makefile
new file mode 100644
index 0000000..0d33169
--- /dev/null
+++ b/arch/x86/kernel/kprobes/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for kernel probes
+#
+
+obj-$(CONFIG_KPROBES) += core.o
+obj-$(CONFIG_OPTPROBES) += opt.o
+obj-$(CONFIG_KPROBES_ON_FTRACE) += ftrace.o
diff --git a/arch/x86/kernel/kprobes/common.h b/arch/x86/kernel/kprobes/common.h
new file mode 100644
index 0000000..2e9d4b5
--- /dev/null
+++ b/arch/x86/kernel/kprobes/common.h
@@ -0,0 +1,113 @@
+#ifndef __X86_KERNEL_KPROBES_COMMON_H
+#define __X86_KERNEL_KPROBES_COMMON_H
+
+/* Kprobes and Optprobes common header */
+
+#ifdef CONFIG_X86_64
+#define SAVE_REGS_STRING \
+ /* Skip cs, ip, orig_ax. */ \
+ " subq $24, %rsp\n" \
+ " pushq %rdi\n" \
+ " pushq %rsi\n" \
+ " pushq %rdx\n" \
+ " pushq %rcx\n" \
+ " pushq %rax\n" \
+ " pushq %r8\n" \
+ " pushq %r9\n" \
+ " pushq %r10\n" \
+ " pushq %r11\n" \
+ " pushq %rbx\n" \
+ " pushq %rbp\n" \
+ " pushq %r12\n" \
+ " pushq %r13\n" \
+ " pushq %r14\n" \
+ " pushq %r15\n"
+#define RESTORE_REGS_STRING \
+ " popq %r15\n" \
+ " popq %r14\n" \
+ " popq %r13\n" \
+ " popq %r12\n" \
+ " popq %rbp\n" \
+ " popq %rbx\n" \
+ " popq %r11\n" \
+ " popq %r10\n" \
+ " popq %r9\n" \
+ " popq %r8\n" \
+ " popq %rax\n" \
+ " popq %rcx\n" \
+ " popq %rdx\n" \
+ " popq %rsi\n" \
+ " popq %rdi\n" \
+ /* Skip orig_ax, ip, cs */ \
+ " addq $24, %rsp\n"
+#else
+#define SAVE_REGS_STRING \
+ /* Skip cs, ip, orig_ax and gs. */ \
+ " subl $16, %esp\n" \
+ " pushl %fs\n" \
+ " pushl %es\n" \
+ " pushl %ds\n" \
+ " pushl %eax\n" \
+ " pushl %ebp\n" \
+ " pushl %edi\n" \
+ " pushl %esi\n" \
+ " pushl %edx\n" \
+ " pushl %ecx\n" \
+ " pushl %ebx\n"
+#define RESTORE_REGS_STRING \
+ " popl %ebx\n" \
+ " popl %ecx\n" \
+ " popl %edx\n" \
+ " popl %esi\n" \
+ " popl %edi\n" \
+ " popl %ebp\n" \
+ " popl %eax\n" \
+ /* Skip ds, es, fs, gs, orig_ax, and ip. Note: don't pop cs here*/\
+ " addl $24, %esp\n"
+#endif
+
+/* Ensure if the instruction can be boostable */
+extern int can_boost(kprobe_opcode_t *instruction);
+/* Recover instruction if given address is probed */
+extern unsigned long recover_probed_instruction(kprobe_opcode_t *buf,
+ unsigned long addr);
+/*
+ * Copy an instruction and adjust the displacement if the instruction
+ * uses the %rip-relative addressing mode.
+ */
+extern int __copy_instruction(u8 *dest, u8 *src);
+
+/* Generate a relative-jump/call instruction */
+extern void synthesize_reljump(void *from, void *to);
+extern void synthesize_relcall(void *from, void *to);
+
+#ifdef CONFIG_OPTPROBES
+extern int arch_init_optprobes(void);
+extern int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter);
+extern unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr);
+#else /* !CONFIG_OPTPROBES */
+static inline int arch_init_optprobes(void)
+{
+ return 0;
+}
+static inline int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
+{
+ return 0;
+}
+static inline unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr)
+{
+ return addr;
+}
+#endif
+
+#ifdef CONFIG_KPROBES_ON_FTRACE
+extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb);
+#else
+static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ return 0;
+}
+#endif
+#endif
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
new file mode 100644
index 0000000..73a7891
--- /dev/null
+++ b/arch/x86/kernel/kprobes/core.c
@@ -0,0 +1,1064 @@
+/*
+ * Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ * Probes initial implementation ( includes contributions from
+ * Rusty Russell).
+ * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
+ * interface to access function arguments.
+ * 2004-Oct Jim Keniston <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
+ * <prasanna@in.ibm.com> adapted for x86_64 from i386.
+ * 2005-Mar Roland McGrath <roland@redhat.com>
+ * Fixed to handle %rip-relative addressing mode correctly.
+ * 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston
+ * <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
+ * <prasanna@in.ibm.com> added function-return probes.
+ * 2005-May Rusty Lynch <rusty.lynch@intel.com>
+ * Added function return probes functionality
+ * 2006-Feb Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> added
+ * kprobe-booster and kretprobe-booster for i386.
+ * 2007-Dec Masami Hiramatsu <mhiramat@redhat.com> added kprobe-booster
+ * and kretprobe-booster for x86-64
+ * 2007-Dec Masami Hiramatsu <mhiramat@redhat.com>, Arjan van de Ven
+ * <arjan@infradead.org> and Jim Keniston <jkenisto@us.ibm.com>
+ * unified x86 kprobes code.
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/hardirq.h>
+#include <linux/preempt.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/alternative.h>
+#include <asm/insn.h>
+#include <asm/debugreg.h>
+
+#include "common.h"
+
+void jprobe_return_end(void);
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+#define stack_addr(regs) ((unsigned long *)kernel_stack_pointer(regs))
+
+#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
+ (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \
+ (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \
+ (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \
+ (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \
+ << (row % 32))
+ /*
+ * Undefined/reserved opcodes, conditional jump, Opcode Extension
+ * Groups, and some special opcodes can not boost.
+ * This is non-const and volatile to keep gcc from statically
+ * optimizing it out, as variable_test_bit makes gcc think only
+ * *(unsigned long*) is used.
+ */
+static volatile u32 twobyte_is_boostable[256 / 32] = {
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+ /* ---------------------------------------------- */
+ W(0x00, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0) | /* 00 */
+ W(0x10, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 10 */
+ W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 20 */
+ W(0x30, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
+ W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
+ W(0x50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 50 */
+ W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1) | /* 60 */
+ W(0x70, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
+ W(0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 80 */
+ W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+ W(0xa0, 1, 1, 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* a0 */
+ W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1) , /* b0 */
+ W(0xc0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
+ W(0xd0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) , /* d0 */
+ W(0xe0, 0, 1, 1, 0, 0, 1, 0, 0, 1, 1, 0, 1, 1, 1, 0, 1) | /* e0 */
+ W(0xf0, 0, 1, 1, 1, 0, 1, 0, 0, 1, 1, 1, 0, 1, 1, 1, 0) /* f0 */
+ /* ----------------------------------------------- */
+ /* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
+};
+#undef W
+
+struct kretprobe_blackpoint kretprobe_blacklist[] = {
+ {"__switch_to", }, /* This function switches only current task, but
+ doesn't switch kernel stack.*/
+ {NULL, NULL} /* Terminator */
+};
+
+const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
+
+static void __kprobes __synthesize_relative_insn(void *from, void *to, u8 op)
+{
+ struct __arch_relative_insn {
+ u8 op;
+ s32 raddr;
+ } __attribute__((packed)) *insn;
+
+ insn = (struct __arch_relative_insn *)from;
+ insn->raddr = (s32)((long)(to) - ((long)(from) + 5));
+ insn->op = op;
+}
+
+/* Insert a jump instruction at address 'from', which jumps to address 'to'.*/
+void __kprobes synthesize_reljump(void *from, void *to)
+{
+ __synthesize_relative_insn(from, to, RELATIVEJUMP_OPCODE);
+}
+
+/* Insert a call instruction at address 'from', which calls address 'to'.*/
+void __kprobes synthesize_relcall(void *from, void *to)
+{
+ __synthesize_relative_insn(from, to, RELATIVECALL_OPCODE);
+}
+
+/*
+ * Skip the prefixes of the instruction.
+ */
+static kprobe_opcode_t *__kprobes skip_prefixes(kprobe_opcode_t *insn)
+{
+ insn_attr_t attr;
+
+ attr = inat_get_opcode_attribute((insn_byte_t)*insn);
+ while (inat_is_legacy_prefix(attr)) {
+ insn++;
+ attr = inat_get_opcode_attribute((insn_byte_t)*insn);
+ }
+#ifdef CONFIG_X86_64
+ if (inat_is_rex_prefix(attr))
+ insn++;
+#endif
+ return insn;
+}
+
+/*
+ * Returns non-zero if opcode is boostable.
+ * RIP relative instructions are adjusted at copying time in 64 bits mode
+ */
+int __kprobes can_boost(kprobe_opcode_t *opcodes)
+{
+ kprobe_opcode_t opcode;
+ kprobe_opcode_t *orig_opcodes = opcodes;
+
+ if (search_exception_tables((unsigned long)opcodes))
+ return 0; /* Page fault may occur on this address. */
+
+retry:
+ if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
+ return 0;
+ opcode = *(opcodes++);
+
+ /* 2nd-byte opcode */
+ if (opcode == 0x0f) {
+ if (opcodes - orig_opcodes > MAX_INSN_SIZE - 1)
+ return 0;
+ return test_bit(*opcodes,
+ (unsigned long *)twobyte_is_boostable);
+ }
+
+ switch (opcode & 0xf0) {
+#ifdef CONFIG_X86_64
+ case 0x40:
+ goto retry; /* REX prefix is boostable */
+#endif
+ case 0x60:
+ if (0x63 < opcode && opcode < 0x67)
+ goto retry; /* prefixes */
+ /* can't boost Address-size override and bound */
+ return (opcode != 0x62 && opcode != 0x67);
+ case 0x70:
+ return 0; /* can't boost conditional jump */
+ case 0xc0:
+ /* can't boost software-interruptions */
+ return (0xc1 < opcode && opcode < 0xcc) || opcode == 0xcf;
+ case 0xd0:
+ /* can boost AA* and XLAT */
+ return (opcode == 0xd4 || opcode == 0xd5 || opcode == 0xd7);
+ case 0xe0:
+ /* can boost in/out and absolute jmps */
+ return ((opcode & 0x04) || opcode == 0xea);
+ case 0xf0:
+ if ((opcode & 0x0c) == 0 && opcode != 0xf1)
+ goto retry; /* lock/rep(ne) prefix */
+ /* clear and set flags are boostable */
+ return (opcode == 0xf5 || (0xf7 < opcode && opcode < 0xfe));
+ default:
+ /* segment override prefixes are boostable */
+ if (opcode == 0x26 || opcode == 0x36 || opcode == 0x3e)
+ goto retry; /* prefixes */
+ /* CS override prefix and call are not boostable */
+ return (opcode != 0x2e && opcode != 0x9a);
+ }
+}
+
+static unsigned long
+__recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
+{
+ struct kprobe *kp;
+
+ kp = get_kprobe((void *)addr);
+ /* There is no probe, return original address */
+ if (!kp)
+ return addr;
+
+ /*
+ * Basically, kp->ainsn.insn has an original instruction.
+ * However, RIP-relative instruction can not do single-stepping
+ * at different place, __copy_instruction() tweaks the displacement of
+ * that instruction. In that case, we can't recover the instruction
+ * from the kp->ainsn.insn.
+ *
+ * On the other hand, kp->opcode has a copy of the first byte of
+ * the probed instruction, which is overwritten by int3. And
+ * the instruction at kp->addr is not modified by kprobes except
+ * for the first byte, we can recover the original instruction
+ * from it and kp->opcode.
+ */
+ memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ buf[0] = kp->opcode;
+ return (unsigned long)buf;
+}
+
+/*
+ * Recover the probed instruction at addr for further analysis.
+ * Caller must lock kprobes by kprobe_mutex, or disable preemption
+ * for preventing to release referencing kprobes.
+ */
+unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
+{
+ unsigned long __addr;
+
+ __addr = __recover_optprobed_insn(buf, addr);
+ if (__addr != addr)
+ return __addr;
+
+ return __recover_probed_insn(buf, addr);
+}
+
+/* Check if paddr is at an instruction boundary */
+static int __kprobes can_probe(unsigned long paddr)
+{
+ unsigned long addr, __addr, offset = 0;
+ struct insn insn;
+ kprobe_opcode_t buf[MAX_INSN_SIZE];
+
+ if (!kallsyms_lookup_size_offset(paddr, NULL, &offset))
+ return 0;
+
+ /* Decode instructions */
+ addr = paddr - offset;
+ while (addr < paddr) {
+ /*
+ * Check if the instruction has been modified by another
+ * kprobe, in which case we replace the breakpoint by the
+ * original instruction in our buffer.
+ * Also, jump optimization will change the breakpoint to
+ * relative-jump. Since the relative-jump itself is
+ * normally used, we just go through if there is no kprobe.
+ */
+ __addr = recover_probed_instruction(buf, addr);
+ kernel_insn_init(&insn, (void *)__addr);
+ insn_get_length(&insn);
+
+ /*
+ * Another debugging subsystem might insert this breakpoint.
+ * In that case, we can't recover it.
+ */
+ if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ return 0;
+ addr += insn.length;
+ }
+
+ return (addr == paddr);
+}
+
+/*
+ * Returns non-zero if opcode modifies the interrupt flag.
+ */
+static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
+{
+ /* Skip prefixes */
+ insn = skip_prefixes(insn);
+
+ switch (*insn) {
+ case 0xfa: /* cli */
+ case 0xfb: /* sti */
+ case 0xcf: /* iret/iretd */
+ case 0x9d: /* popf/popfd */
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Copy an instruction and adjust the displacement if the instruction
+ * uses the %rip-relative addressing mode.
+ * If it does, Return the address of the 32-bit displacement word.
+ * If not, return null.
+ * Only applicable to 64-bit x86.
+ */
+int __kprobes __copy_instruction(u8 *dest, u8 *src)
+{
+ struct insn insn;
+ kprobe_opcode_t buf[MAX_INSN_SIZE];
+
+ kernel_insn_init(&insn, (void *)recover_probed_instruction(buf, (unsigned long)src));
+ insn_get_length(&insn);
+ /* Another subsystem puts a breakpoint, failed to recover */
+ if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ return 0;
+ memcpy(dest, insn.kaddr, insn.length);
+
+#ifdef CONFIG_X86_64
+ if (insn_rip_relative(&insn)) {
+ s64 newdisp;
+ u8 *disp;
+ kernel_insn_init(&insn, dest);
+ insn_get_displacement(&insn);
+ /*
+ * The copied instruction uses the %rip-relative addressing
+ * mode. Adjust the displacement for the difference between
+ * the original location of this instruction and the location
+ * of the copy that will actually be run. The tricky bit here
+ * is making sure that the sign extension happens correctly in
+ * this calculation, since we need a signed 32-bit result to
+ * be sign-extended to 64 bits when it's added to the %rip
+ * value and yield the same 64-bit result that the sign-
+ * extension of the original signed 32-bit displacement would
+ * have given.
+ */
+ newdisp = (u8 *) src + (s64) insn.displacement.value - (u8 *) dest;
+ BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
+ disp = (u8 *) dest + insn_offset_displacement(&insn);
+ *(s32 *) disp = (s32) newdisp;
+ }
+#endif
+ return insn.length;
+}
+
+static void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+ /* Copy an instruction with recovering if other optprobe modifies it.*/
+ __copy_instruction(p->ainsn.insn, p->addr);
+
+ /*
+ * __copy_instruction can modify the displacement of the instruction,
+ * but it doesn't affect boostable check.
+ */
+ if (can_boost(p->ainsn.insn))
+ p->ainsn.boostable = 0;
+ else
+ p->ainsn.boostable = -1;
+
+ /* Also, displacement change doesn't affect the first byte */
+ p->opcode = p->ainsn.insn[0];
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ if (alternatives_text_reserved(p->addr, p->addr))
+ return -EINVAL;
+
+ if (!can_probe((unsigned long)p->addr))
+ return -EILSEQ;
+ /* insn: must be on special executable page on x86. */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ arch_copy_kprobe(p);
+ return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ text_poke(p->addr, &p->opcode, 1);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ if (p->ainsn.insn) {
+ free_insn_slot(p->ainsn.insn, (p->ainsn.boostable == 1));
+ p->ainsn.insn = NULL;
+ }
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+ kcb->prev_kprobe.old_flags = kcb->kprobe_old_flags;
+ kcb->prev_kprobe.saved_flags = kcb->kprobe_saved_flags;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+ kcb->kprobe_old_flags = kcb->prev_kprobe.old_flags;
+ kcb->kprobe_saved_flags = kcb->prev_kprobe.saved_flags;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ __this_cpu_write(current_kprobe, p);
+ kcb->kprobe_saved_flags = kcb->kprobe_old_flags
+ = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
+ if (is_IF_modifier(p->ainsn.insn))
+ kcb->kprobe_saved_flags &= ~X86_EFLAGS_IF;
+}
+
+static void __kprobes clear_btf(void)
+{
+ if (test_thread_flag(TIF_BLOCKSTEP)) {
+ unsigned long debugctl = get_debugctlmsr();
+
+ debugctl &= ~DEBUGCTLMSR_BTF;
+ update_debugctlmsr(debugctl);
+ }
+}
+
+static void __kprobes restore_btf(void)
+{
+ if (test_thread_flag(TIF_BLOCKSTEP)) {
+ unsigned long debugctl = get_debugctlmsr();
+
+ debugctl |= DEBUGCTLMSR_BTF;
+ update_debugctlmsr(debugctl);
+ }
+}
+
+void __kprobes
+arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ unsigned long *sara = stack_addr(regs);
+
+ ri->ret_addr = (kprobe_opcode_t *) *sara;
+
+ /* Replace the return addr with trampoline addr */
+ *sara = (unsigned long) &kretprobe_trampoline;
+}
+
+static void __kprobes
+setup_singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb, int reenter)
+{
+ if (setup_detour_execution(p, regs, reenter))
+ return;
+
+#if !defined(CONFIG_PREEMPT)
+ if (p->ainsn.boostable == 1 && !p->post_handler) {
+ /* Boost up -- we can execute copied instructions directly */
+ if (!reenter)
+ reset_current_kprobe();
+ /*
+ * Reentering boosted probe doesn't reset current_kprobe,
+ * nor set current_kprobe, because it doesn't use single
+ * stepping.
+ */
+ regs->ip = (unsigned long)p->ainsn.insn;
+ preempt_enable_no_resched();
+ return;
+ }
+#endif
+ if (reenter) {
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p, regs, kcb);
+ kcb->kprobe_status = KPROBE_REENTER;
+ } else
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ /* Prepare real single stepping */
+ clear_btf();
+ regs->flags |= X86_EFLAGS_TF;
+ regs->flags &= ~X86_EFLAGS_IF;
+ /* single step inline if the instruction is an int3 */
+ if (p->opcode == BREAKPOINT_INSTRUCTION)
+ regs->ip = (unsigned long)p->addr;
+ else
+ regs->ip = (unsigned long)p->ainsn.insn;
+}
+
+/*
+ * We have reentered the kprobe_handler(), since another probe was hit while
+ * within the handler. We save the original kprobes variables and just single
+ * step on the instruction of the new probe without calling any user handlers.
+ */
+static int __kprobes
+reenter_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
+{
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SSDONE:
+ case KPROBE_HIT_ACTIVE:
+ kprobes_inc_nmissed_count(p);
+ setup_singlestep(p, regs, kcb, 1);
+ break;
+ case KPROBE_HIT_SS:
+ /* A probe has been hit in the codepath leading up to, or just
+ * after, single-stepping of a probed instruction. This entire
+ * codepath should strictly reside in .kprobes.text section.
+ * Raise a BUG or we'll continue in an endless reentering loop
+ * and eventually a stack overflow.
+ */
+ printk(KERN_WARNING "Unrecoverable kprobe detected at %p.\n",
+ p->addr);
+ dump_kprobe(p);
+ BUG();
+ default:
+ /* impossible cases */
+ WARN_ON(1);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * Interrupts are disabled on entry as trap3 is an interrupt gate and they
+ * remain disabled throughout this function.
+ */
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ kprobe_opcode_t *addr;
+ struct kprobe *p;
+ struct kprobe_ctlblk *kcb;
+
+ addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
+ /*
+ * We don't want to be preempted for the entire
+ * duration of kprobe processing. We conditionally
+ * re-enable preemption at the end of this function,
+ * and also in reenter_kprobe() and setup_singlestep().
+ */
+ preempt_disable();
+
+ kcb = get_kprobe_ctlblk();
+ p = get_kprobe(addr);
+
+ if (p) {
+ if (kprobe_running()) {
+ if (reenter_kprobe(p, regs, kcb))
+ return 1;
+ } else {
+ set_current_kprobe(p, regs, kcb);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ /*
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry
+ * for jprobe processing, so get out doing nothing
+ * more here.
+ */
+ if (!p->pre_handler || !p->pre_handler(p, regs))
+ setup_singlestep(p, regs, kcb, 0);
+ return 1;
+ }
+ } else if (*addr != BREAKPOINT_INSTRUCTION) {
+ /*
+ * The breakpoint instruction was removed right
+ * after we hit it. Another cpu has removed
+ * either a probepoint or a debugger breakpoint
+ * at this address. In either case, no further
+ * handling of this interrupt is appropriate.
+ * Back up over the (now missing) int3 and run
+ * the original instruction.
+ */
+ regs->ip = (unsigned long)addr;
+ preempt_enable_no_resched();
+ return 1;
+ } else if (kprobe_running()) {
+ p = __this_cpu_read(current_kprobe);
+ if (p->break_handler && p->break_handler(p, regs)) {
+ if (!skip_singlestep(p, regs, kcb))
+ setup_singlestep(p, regs, kcb, 0);
+ return 1;
+ }
+ } /* else: not a kprobe fault; let the kernel handle it */
+
+ preempt_enable_no_resched();
+ return 0;
+}
+
+/*
+ * When a retprobed function returns, this code saves registers and
+ * calls trampoline_handler() runs, which calls the kretprobe's handler.
+ */
+static void __used __kprobes kretprobe_trampoline_holder(void)
+{
+ asm volatile (
+ ".global kretprobe_trampoline\n"
+ "kretprobe_trampoline: \n"
+#ifdef CONFIG_X86_64
+ /* We don't bother saving the ss register */
+ " pushq %rsp\n"
+ " pushfq\n"
+ SAVE_REGS_STRING
+ " movq %rsp, %rdi\n"
+ " call trampoline_handler\n"
+ /* Replace saved sp with true return address. */
+ " movq %rax, 152(%rsp)\n"
+ RESTORE_REGS_STRING
+ " popfq\n"
+#else
+ " pushf\n"
+ SAVE_REGS_STRING
+ " movl %esp, %eax\n"
+ " call trampoline_handler\n"
+ /* Move flags to cs */
+ " movl 56(%esp), %edx\n"
+ " movl %edx, 52(%esp)\n"
+ /* Replace saved flags with true return address. */
+ " movl %eax, 56(%esp)\n"
+ RESTORE_REGS_STRING
+ " popf\n"
+#endif
+ " ret\n");
+}
+
+/*
+ * Called from kretprobe_trampoline
+ */
+static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
+{
+ struct kretprobe_instance *ri = NULL;
+ struct hlist_head *head, empty_rp;
+ struct hlist_node *node, *tmp;
+ unsigned long flags, orig_ret_address = 0;
+ unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+ kprobe_opcode_t *correct_ret_addr = NULL;
+
+ INIT_HLIST_HEAD(&empty_rp);
+ kretprobe_hash_lock(current, &head, &flags);
+ /* fixup registers */
+#ifdef CONFIG_X86_64
+ regs->cs = __KERNEL_CS;
+#else
+ regs->cs = __KERNEL_CS | get_kernel_rpl();
+ regs->gs = 0;
+#endif
+ regs->ip = trampoline_address;
+ regs->orig_ax = ~0UL;
+
+ /*
+ * It is possible to have multiple instances associated with a given
+ * task either because multiple functions in the call path have
+ * return probes installed on them, and/or more than one
+ * return probe was registered for a target function.
+ *
+ * We can handle this because:
+ * - instances are always pushed into the head of the list
+ * - when multiple return probes are registered for the same
+ * function, the (chronologically) first instance's ret_addr
+ * will be the real return address, and all the rest will
+ * point to kretprobe_trampoline.
+ */
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+ correct_ret_addr = ri->ret_addr;
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ if (ri->rp && ri->rp->handler) {
+ __this_cpu_write(current_kprobe, &ri->rp->kp);
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ ri->ret_addr = correct_ret_addr;
+ ri->rp->handler(ri, regs);
+ __this_cpu_write(current_kprobe, NULL);
+ }
+
+ recycle_rp_inst(ri, &empty_rp);
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_hash_unlock(current, &flags);
+
+ hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+ hlist_del(&ri->hlist);
+ kfree(ri);
+ }
+ return (void *)orig_ret_address;
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "int 3"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * interrupt. We have to fix up the stack as follows:
+ *
+ * 0) Except in the case of absolute or indirect jump or call instructions,
+ * the new ip is relative to the copied instruction. We need to make
+ * it relative to the original instruction.
+ *
+ * 1) If the single-stepped instruction was pushfl, then the TF and IF
+ * flags are set in the just-pushed flags, and may need to be cleared.
+ *
+ * 2) If the single-stepped instruction was a call, the return address
+ * that is atop the stack is the address following the copied instruction.
+ * We need to make it the address following the original instruction.
+ *
+ * If this is the first time we've single-stepped the instruction at
+ * this probepoint, and the instruction is boostable, boost it: add a
+ * jump instruction after the copied instruction, that jumps to the next
+ * instruction after the probepoint.
+ */
+static void __kprobes
+resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
+{
+ unsigned long *tos = stack_addr(regs);
+ unsigned long copy_ip = (unsigned long)p->ainsn.insn;
+ unsigned long orig_ip = (unsigned long)p->addr;
+ kprobe_opcode_t *insn = p->ainsn.insn;
+
+ /* Skip prefixes */
+ insn = skip_prefixes(insn);
+
+ regs->flags &= ~X86_EFLAGS_TF;
+ switch (*insn) {
+ case 0x9c: /* pushfl */
+ *tos &= ~(X86_EFLAGS_TF | X86_EFLAGS_IF);
+ *tos |= kcb->kprobe_old_flags;
+ break;
+ case 0xc2: /* iret/ret/lret */
+ case 0xc3:
+ case 0xca:
+ case 0xcb:
+ case 0xcf:
+ case 0xea: /* jmp absolute -- ip is correct */
+ /* ip is already adjusted, no more changes required */
+ p->ainsn.boostable = 1;
+ goto no_change;
+ case 0xe8: /* call relative - Fix return addr */
+ *tos = orig_ip + (*tos - copy_ip);
+ break;
+#ifdef CONFIG_X86_32
+ case 0x9a: /* call absolute -- same as call absolute, indirect */
+ *tos = orig_ip + (*tos - copy_ip);
+ goto no_change;
+#endif
+ case 0xff:
+ if ((insn[1] & 0x30) == 0x10) {
+ /*
+ * call absolute, indirect
+ * Fix return addr; ip is correct.
+ * But this is not boostable
+ */
+ *tos = orig_ip + (*tos - copy_ip);
+ goto no_change;
+ } else if (((insn[1] & 0x31) == 0x20) ||
+ ((insn[1] & 0x31) == 0x21)) {
+ /*
+ * jmp near and far, absolute indirect
+ * ip is correct. And this is boostable
+ */
+ p->ainsn.boostable = 1;
+ goto no_change;
+ }
+ default:
+ break;
+ }
+
+ if (p->ainsn.boostable == 0) {
+ if ((regs->ip > copy_ip) &&
+ (regs->ip - copy_ip) + 5 < MAX_INSN_SIZE) {
+ /*
+ * These instructions can be executed directly if it
+ * jumps back to correct address.
+ */
+ synthesize_reljump((void *)regs->ip,
+ (void *)orig_ip + (regs->ip - copy_ip));
+ p->ainsn.boostable = 1;
+ } else {
+ p->ainsn.boostable = -1;
+ }
+ }
+
+ regs->ip += orig_ip - copy_ip;
+
+no_change:
+ restore_btf();
+}
+
+/*
+ * Interrupts are disabled on entry as trap1 is an interrupt gate and they
+ * remain disabled throughout this function.
+ */
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (!cur)
+ return 0;
+
+ resume_execution(cur, regs, kcb);
+ regs->flags |= kcb->kprobe_saved_flags;
+
+ if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
+ }
+
+ /* Restore back the original saved kprobes variables and continue. */
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ goto out;
+ }
+ reset_current_kprobe();
+out:
+ preempt_enable_no_resched();
+
+ /*
+ * if somebody else is singlestepping across a probe point, flags
+ * will have TF set, in which case, continue the remaining processing
+ * of do_debug, as if this is not a probe hit.
+ */
+ if (regs->flags & X86_EFLAGS_TF)
+ return 0;
+
+ return 1;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the ip points back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ regs->ip = (unsigned long)cur->addr;
+ regs->flags |= kcb->kprobe_old_flags;
+ if (kcb->kprobe_status == KPROBE_REENTER)
+ restore_previous_kprobe(kcb);
+ else
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ break;
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accounting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it first.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+ return 1;
+
+ /*
+ * In case the user-specified fault handler returned
+ * zero, try to fix up.
+ */
+ if (fixup_exception(regs))
+ return 1;
+
+ /*
+ * fixup routine could not handle it,
+ * Let do_page_fault() fix it.
+ */
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine for handling exceptions.
+ */
+int __kprobes
+kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data)
+{
+ struct die_args *args = data;
+ int ret = NOTIFY_DONE;
+
+ if (args->regs && user_mode_vm(args->regs))
+ return ret;
+
+ switch (val) {
+ case DIE_INT3:
+ if (kprobe_handler(args->regs))
+ ret = NOTIFY_STOP;
+ break;
+ case DIE_DEBUG:
+ if (post_kprobe_handler(args->regs)) {
+ /*
+ * Reset the BS bit in dr6 (pointed by args->err) to
+ * denote completion of processing
+ */
+ (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
+ ret = NOTIFY_STOP;
+ }
+ break;
+ case DIE_GPF:
+ /*
+ * To be potentially processing a kprobe fault and to
+ * trust the result from kprobe_running(), we have
+ * be non-preemptible.
+ */
+ if (!preemptible() && kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ ret = NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ unsigned long addr;
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ kcb->jprobe_saved_regs = *regs;
+ kcb->jprobe_saved_sp = stack_addr(regs);
+ addr = (unsigned long)(kcb->jprobe_saved_sp);
+
+ /*
+ * As Linus pointed out, gcc assumes that the callee
+ * owns the argument space and could overwrite it, e.g.
+ * tailcall optimization. So, to be absolutely safe
+ * we also save and restore enough stack bytes to cover
+ * the argument area.
+ */
+ memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
+ MIN_STACK_SIZE(addr));
+ regs->flags &= ~X86_EFLAGS_IF;
+ trace_hardirqs_off();
+ regs->ip = (unsigned long)(jp->entry);
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ asm volatile (
+#ifdef CONFIG_X86_64
+ " xchg %%rbx,%%rsp \n"
+#else
+ " xchgl %%ebx,%%esp \n"
+#endif
+ " int3 \n"
+ " .globl jprobe_return_end\n"
+ " jprobe_return_end: \n"
+ " nop \n"::"b"
+ (kcb->jprobe_saved_sp):"memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ u8 *addr = (u8 *) (regs->ip - 1);
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if ((addr > (u8 *) jprobe_return) &&
+ (addr < (u8 *) jprobe_return_end)) {
+ if (stack_addr(regs) != kcb->jprobe_saved_sp) {
+ struct pt_regs *saved_regs = &kcb->jprobe_saved_regs;
+ printk(KERN_ERR
+ "current sp %p does not match saved sp %p\n",
+ stack_addr(regs), kcb->jprobe_saved_sp);
+ printk(KERN_ERR "Saved registers for jprobe %p\n", jp);
+ show_regs(saved_regs);
+ printk(KERN_ERR "Current registers\n");
+ show_regs(regs);
+ BUG();
+ }
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((kprobe_opcode_t *)(kcb->jprobe_saved_sp),
+ kcb->jprobes_stack,
+ MIN_STACK_SIZE(kcb->jprobe_saved_sp));
+ preempt_enable_no_resched();
+ return 1;
+ }
+ return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+ return arch_init_optprobes();
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+ return 0;
+}
diff --git a/arch/x86/kernel/kprobes/ftrace.c b/arch/x86/kernel/kprobes/ftrace.c
new file mode 100644
index 0000000..23ef5c5
--- /dev/null
+++ b/arch/x86/kernel/kprobes/ftrace.c
@@ -0,0 +1,93 @@
+/*
+ * Dynamic Ftrace based Kprobes Optimization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) Hitachi Ltd., 2012
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/preempt.h>
+#include <linux/ftrace.h>
+
+#include "common.h"
+
+static int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ /*
+ * Emulate singlestep (and also recover regs->ip)
+ * as if there is a 5byte nop
+ */
+ regs->ip = (unsigned long)p->addr + MCOUNT_INSN_SIZE;
+ if (unlikely(p->post_handler)) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ p->post_handler(p, regs, 0);
+ }
+ __this_cpu_write(current_kprobe, NULL);
+ return 1;
+}
+
+int __kprobes skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ if (kprobe_ftrace(p))
+ return __skip_singlestep(p, regs, kcb);
+ else
+ return 0;
+}
+
+/* Ftrace callback handler for kprobes */
+void __kprobes kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+ struct ftrace_ops *ops, struct pt_regs *regs)
+{
+ struct kprobe *p;
+ struct kprobe_ctlblk *kcb;
+ unsigned long flags;
+
+ /* Disable irq for emulating a breakpoint and avoiding preempt */
+ local_irq_save(flags);
+
+ p = get_kprobe((kprobe_opcode_t *)ip);
+ if (unlikely(!p) || kprobe_disabled(p))
+ goto end;
+
+ kcb = get_kprobe_ctlblk();
+ if (kprobe_running()) {
+ kprobes_inc_nmissed_count(p);
+ } else {
+ /* Kprobe handler expects regs->ip = ip + 1 as breakpoint hit */
+ regs->ip = ip + sizeof(kprobe_opcode_t);
+
+ __this_cpu_write(current_kprobe, p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+ if (!p->pre_handler || !p->pre_handler(p, regs))
+ __skip_singlestep(p, regs, kcb);
+ /*
+ * If pre_handler returns !0, it sets regs->ip and
+ * resets current kprobe.
+ */
+ }
+end:
+ local_irq_restore(flags);
+}
+
+int __kprobes arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+ p->ainsn.insn = NULL;
+ p->ainsn.boostable = -1;
+ return 0;
+}
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
new file mode 100644
index 0000000..76dc6f0
--- /dev/null
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -0,0 +1,512 @@
+/*
+ * Kernel Probes Jump Optimization (Optprobes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ * Copyright (C) Hitachi Ltd., 2012
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/hardirq.h>
+#include <linux/preempt.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/desc.h>
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/alternative.h>
+#include <asm/insn.h>
+#include <asm/debugreg.h>
+
+#include "common.h"
+
+unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr)
+{
+ struct optimized_kprobe *op;
+ struct kprobe *kp;
+ long offs;
+ int i;
+
+ for (i = 0; i < RELATIVEJUMP_SIZE; i++) {
+ kp = get_kprobe((void *)addr - i);
+ /* This function only handles jump-optimized kprobe */
+ if (kp && kprobe_optimized(kp)) {
+ op = container_of(kp, struct optimized_kprobe, kp);
+ /* If op->list is not empty, op is under optimizing */
+ if (list_empty(&op->list))
+ goto found;
+ }
+ }
+
+ return addr;
+found:
+ /*
+ * If the kprobe can be optimized, original bytes which can be
+ * overwritten by jump destination address. In this case, original
+ * bytes must be recovered from op->optinsn.copied_insn buffer.
+ */
+ memcpy(buf, (void *)addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+ if (addr == (unsigned long)kp->addr) {
+ buf[0] = kp->opcode;
+ memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
+ } else {
+ offs = addr - (unsigned long)kp->addr - 1;
+ memcpy(buf, op->optinsn.copied_insn + offs, RELATIVE_ADDR_SIZE - offs);
+ }
+
+ return (unsigned long)buf;
+}
+
+/* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */
+static void __kprobes synthesize_set_arg1(kprobe_opcode_t *addr, unsigned long val)
+{
+#ifdef CONFIG_X86_64
+ *addr++ = 0x48;
+ *addr++ = 0xbf;
+#else
+ *addr++ = 0xb8;
+#endif
+ *(unsigned long *)addr = val;
+}
+
+static void __used __kprobes kprobes_optinsn_template_holder(void)
+{
+ asm volatile (
+ ".global optprobe_template_entry\n"
+ "optprobe_template_entry:\n"
+#ifdef CONFIG_X86_64
+ /* We don't bother saving the ss register */
+ " pushq %rsp\n"
+ " pushfq\n"
+ SAVE_REGS_STRING
+ " movq %rsp, %rsi\n"
+ ".global optprobe_template_val\n"
+ "optprobe_template_val:\n"
+ ASM_NOP5
+ ASM_NOP5
+ ".global optprobe_template_call\n"
+ "optprobe_template_call:\n"
+ ASM_NOP5
+ /* Move flags to rsp */
+ " movq 144(%rsp), %rdx\n"
+ " movq %rdx, 152(%rsp)\n"
+ RESTORE_REGS_STRING
+ /* Skip flags entry */
+ " addq $8, %rsp\n"
+ " popfq\n"
+#else /* CONFIG_X86_32 */
+ " pushf\n"
+ SAVE_REGS_STRING
+ " movl %esp, %edx\n"
+ ".global optprobe_template_val\n"
+ "optprobe_template_val:\n"
+ ASM_NOP5
+ ".global optprobe_template_call\n"
+ "optprobe_template_call:\n"
+ ASM_NOP5
+ RESTORE_REGS_STRING
+ " addl $4, %esp\n" /* skip cs */
+ " popf\n"
+#endif
+ ".global optprobe_template_end\n"
+ "optprobe_template_end:\n");
+}
+
+#define TMPL_MOVE_IDX \
+ ((long)&optprobe_template_val - (long)&optprobe_template_entry)
+#define TMPL_CALL_IDX \
+ ((long)&optprobe_template_call - (long)&optprobe_template_entry)
+#define TMPL_END_IDX \
+ ((long)&optprobe_template_end - (long)&optprobe_template_entry)
+
+#define INT3_SIZE sizeof(kprobe_opcode_t)
+
+/* Optimized kprobe call back function: called from optinsn */
+static void __kprobes optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ unsigned long flags;
+
+ /* This is possible if op is under delayed unoptimizing */
+ if (kprobe_disabled(&op->kp))
+ return;
+
+ local_irq_save(flags);
+ if (kprobe_running()) {
+ kprobes_inc_nmissed_count(&op->kp);
+ } else {
+ /* Save skipped registers */
+#ifdef CONFIG_X86_64
+ regs->cs = __KERNEL_CS;
+#else
+ regs->cs = __KERNEL_CS | get_kernel_rpl();
+ regs->gs = 0;
+#endif
+ regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
+ regs->orig_ax = ~0UL;
+
+ __this_cpu_write(current_kprobe, &op->kp);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+ opt_pre_handler(&op->kp, regs);
+ __this_cpu_write(current_kprobe, NULL);
+ }
+ local_irq_restore(flags);
+}
+
+static int __kprobes copy_optimized_instructions(u8 *dest, u8 *src)
+{
+ int len = 0, ret;
+
+ while (len < RELATIVEJUMP_SIZE) {
+ ret = __copy_instruction(dest + len, src + len);
+ if (!ret || !can_boost(dest + len))
+ return -EINVAL;
+ len += ret;
+ }
+ /* Check whether the address range is reserved */
+ if (ftrace_text_reserved(src, src + len - 1) ||
+ alternatives_text_reserved(src, src + len - 1) ||
+ jump_label_text_reserved(src, src + len - 1))
+ return -EBUSY;
+
+ return len;
+}
+
+/* Check whether insn is indirect jump */
+static int __kprobes insn_is_indirect_jump(struct insn *insn)
+{
+ return ((insn->opcode.bytes[0] == 0xff &&
+ (X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */
+ insn->opcode.bytes[0] == 0xea); /* Segment based jump */
+}
+
+/* Check whether insn jumps into specified address range */
+static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
+{
+ unsigned long target = 0;
+
+ switch (insn->opcode.bytes[0]) {
+ case 0xe0: /* loopne */
+ case 0xe1: /* loope */
+ case 0xe2: /* loop */
+ case 0xe3: /* jcxz */
+ case 0xe9: /* near relative jump */
+ case 0xeb: /* short relative jump */
+ break;
+ case 0x0f:
+ if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */
+ break;
+ return 0;
+ default:
+ if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */
+ break;
+ return 0;
+ }
+ target = (unsigned long)insn->next_byte + insn->immediate.value;
+
+ return (start <= target && target <= start + len);
+}
+
+/* Decode whole function to ensure any instructions don't jump into target */
+static int __kprobes can_optimize(unsigned long paddr)
+{
+ unsigned long addr, size = 0, offset = 0;
+ struct insn insn;
+ kprobe_opcode_t buf[MAX_INSN_SIZE];
+
+ /* Lookup symbol including addr */
+ if (!kallsyms_lookup_size_offset(paddr, &size, &offset))
+ return 0;
+
+ /*
+ * Do not optimize in the entry code due to the unstable
+ * stack handling.
+ */
+ if ((paddr >= (unsigned long)__entry_text_start) &&
+ (paddr < (unsigned long)__entry_text_end))
+ return 0;
+
+ /* Check there is enough space for a relative jump. */
+ if (size - offset < RELATIVEJUMP_SIZE)
+ return 0;
+
+ /* Decode instructions */
+ addr = paddr - offset;
+ while (addr < paddr - offset + size) { /* Decode until function end */
+ if (search_exception_tables(addr))
+ /*
+ * Since some fixup code will jumps into this function,
+ * we can't optimize kprobe in this function.
+ */
+ return 0;
+ kernel_insn_init(&insn, (void *)recover_probed_instruction(buf, addr));
+ insn_get_length(&insn);
+ /* Another subsystem puts a breakpoint */
+ if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ return 0;
+ /* Recover address */
+ insn.kaddr = (void *)addr;
+ insn.next_byte = (void *)(addr + insn.length);
+ /* Check any instructions don't jump into target */
+ if (insn_is_indirect_jump(&insn) ||
+ insn_jump_into_range(&insn, paddr + INT3_SIZE,
+ RELATIVE_ADDR_SIZE))
+ return 0;
+ addr += insn.length;
+ }
+
+ return 1;
+}
+
+/* Check optimized_kprobe can actually be optimized. */
+int __kprobes arch_check_optimized_kprobe(struct optimized_kprobe *op)
+{
+ int i;
+ struct kprobe *p;
+
+ for (i = 1; i < op->optinsn.size; i++) {
+ p = get_kprobe(op->kp.addr + i);
+ if (p && !kprobe_disabled(p))
+ return -EEXIST;
+ }
+
+ return 0;
+}
+
+/* Check the addr is within the optimized instructions. */
+int __kprobes
+arch_within_optimized_kprobe(struct optimized_kprobe *op, unsigned long addr)
+{
+ return ((unsigned long)op->kp.addr <= addr &&
+ (unsigned long)op->kp.addr + op->optinsn.size > addr);
+}
+
+/* Free optimized instruction slot */
+static __kprobes
+void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
+{
+ if (op->optinsn.insn) {
+ free_optinsn_slot(op->optinsn.insn, dirty);
+ op->optinsn.insn = NULL;
+ op->optinsn.size = 0;
+ }
+}
+
+void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
+{
+ __arch_remove_optimized_kprobe(op, 1);
+}
+
+/*
+ * Copy replacing target instructions
+ * Target instructions MUST be relocatable (checked inside)
+ * This is called when new aggr(opt)probe is allocated or reused.
+ */
+int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
+{
+ u8 *buf;
+ int ret;
+ long rel;
+
+ if (!can_optimize((unsigned long)op->kp.addr))
+ return -EILSEQ;
+
+ op->optinsn.insn = get_optinsn_slot();
+ if (!op->optinsn.insn)
+ return -ENOMEM;
+
+ /*
+ * Verify if the address gap is in 2GB range, because this uses
+ * a relative jump.
+ */
+ rel = (long)op->optinsn.insn - (long)op->kp.addr + RELATIVEJUMP_SIZE;
+ if (abs(rel) > 0x7fffffff)
+ return -ERANGE;
+
+ buf = (u8 *)op->optinsn.insn;
+
+ /* Copy instructions into the out-of-line buffer */
+ ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr);
+ if (ret < 0) {
+ __arch_remove_optimized_kprobe(op, 0);
+ return ret;
+ }
+ op->optinsn.size = ret;
+
+ /* Copy arch-dep-instance from template */
+ memcpy(buf, &optprobe_template_entry, TMPL_END_IDX);
+
+ /* Set probe information */
+ synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op);
+
+ /* Set probe function call */
+ synthesize_relcall(buf + TMPL_CALL_IDX, optimized_callback);
+
+ /* Set returning jmp instruction at the tail of out-of-line buffer */
+ synthesize_reljump(buf + TMPL_END_IDX + op->optinsn.size,
+ (u8 *)op->kp.addr + op->optinsn.size);
+
+ flush_icache_range((unsigned long) buf,
+ (unsigned long) buf + TMPL_END_IDX +
+ op->optinsn.size + RELATIVEJUMP_SIZE);
+ return 0;
+}
+
+#define MAX_OPTIMIZE_PROBES 256
+static struct text_poke_param *jump_poke_params;
+static struct jump_poke_buffer {
+ u8 buf[RELATIVEJUMP_SIZE];
+} *jump_poke_bufs;
+
+static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
+ u8 *insn_buf,
+ struct optimized_kprobe *op)
+{
+ s32 rel = (s32)((long)op->optinsn.insn -
+ ((long)op->kp.addr + RELATIVEJUMP_SIZE));
+
+ /* Backup instructions which will be replaced by jump address */
+ memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
+ RELATIVE_ADDR_SIZE);
+
+ insn_buf[0] = RELATIVEJUMP_OPCODE;
+ *(s32 *)(&insn_buf[1]) = rel;
+
+ tprm->addr = op->kp.addr;
+ tprm->opcode = insn_buf;
+ tprm->len = RELATIVEJUMP_SIZE;
+}
+
+/*
+ * Replace breakpoints (int3) with relative jumps.
+ * Caller must call with locking kprobe_mutex and text_mutex.
+ */
+void __kprobes arch_optimize_kprobes(struct list_head *oplist)
+{
+ struct optimized_kprobe *op, *tmp;
+ int c = 0;
+
+ list_for_each_entry_safe(op, tmp, oplist, list) {
+ WARN_ON(kprobe_disabled(&op->kp));
+ /* Setup param */
+ setup_optimize_kprobe(&jump_poke_params[c],
+ jump_poke_bufs[c].buf, op);
+ list_del_init(&op->list);
+ if (++c >= MAX_OPTIMIZE_PROBES)
+ break;
+ }
+
+ /*
+ * text_poke_smp doesn't support NMI/MCE code modifying.
+ * However, since kprobes itself also doesn't support NMI/MCE
+ * code probing, it's not a problem.
+ */
+ text_poke_smp_batch(jump_poke_params, c);
+}
+
+static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm,
+ u8 *insn_buf,
+ struct optimized_kprobe *op)
+{
+ /* Set int3 to first byte for kprobes */
+ insn_buf[0] = BREAKPOINT_INSTRUCTION;
+ memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
+
+ tprm->addr = op->kp.addr;
+ tprm->opcode = insn_buf;
+ tprm->len = RELATIVEJUMP_SIZE;
+}
+
+/*
+ * Recover original instructions and breakpoints from relative jumps.
+ * Caller must call with locking kprobe_mutex.
+ */
+extern void arch_unoptimize_kprobes(struct list_head *oplist,
+ struct list_head *done_list)
+{
+ struct optimized_kprobe *op, *tmp;
+ int c = 0;
+
+ list_for_each_entry_safe(op, tmp, oplist, list) {
+ /* Setup param */
+ setup_unoptimize_kprobe(&jump_poke_params[c],
+ jump_poke_bufs[c].buf, op);
+ list_move(&op->list, done_list);
+ if (++c >= MAX_OPTIMIZE_PROBES)
+ break;
+ }
+
+ /*
+ * text_poke_smp doesn't support NMI/MCE code modifying.
+ * However, since kprobes itself also doesn't support NMI/MCE
+ * code probing, it's not a problem.
+ */
+ text_poke_smp_batch(jump_poke_params, c);
+}
+
+/* Replace a relative jump with a breakpoint (int3). */
+void __kprobes arch_unoptimize_kprobe(struct optimized_kprobe *op)
+{
+ u8 buf[RELATIVEJUMP_SIZE];
+
+ /* Set int3 to first byte for kprobes */
+ buf[0] = BREAKPOINT_INSTRUCTION;
+ memcpy(buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
+ text_poke_smp(op->kp.addr, buf, RELATIVEJUMP_SIZE);
+}
+
+int __kprobes
+setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter)
+{
+ struct optimized_kprobe *op;
+
+ if (p->flags & KPROBE_FLAG_OPTIMIZED) {
+ /* This kprobe is really able to run optimized path. */
+ op = container_of(p, struct optimized_kprobe, kp);
+ /* Detour through copied instructions */
+ regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
+ if (!reenter)
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ return 1;
+ }
+ return 0;
+}
+
+int __kprobes arch_init_optprobes(void)
+{
+ /* Allocate code buffer and parameter array */
+ jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) *
+ MAX_OPTIMIZE_PROBES, GFP_KERNEL);
+ if (!jump_poke_bufs)
+ return -ENOMEM;
+
+ jump_poke_params = kmalloc(sizeof(struct text_poke_param) *
+ MAX_OPTIMIZE_PROBES, GFP_KERNEL);
+ if (!jump_poke_params) {
+ kfree(jump_poke_bufs);
+ jump_poke_bufs = NULL;
+ return -ENOMEM;
+ }
+
+ return 0;
+}
^ permalink raw reply related [flat|nested] 12+ messages in thread