From: B A <chris.std@web.de>
To: Chris Murphy <lists@colorremedies.com>,
btrfs kernel mailing list <linux-btrfs@vger.kernel.org>
Subject: Aw: Re: Help needed with filesystem errors: parent transid verify failed
Date: Tue, 30 Mar 2021 10:44:05 +0200 [thread overview]
Message-ID: <trinity-6258eac7-550c-402f-9280-6f529e372d32-1617093845116@3c-app-webde-bs38> (raw)
In-Reply-To: <CAJCQCtQWtnjyN88gif-tmA_cxcs+6HPgVxB5XwNmAVj3qMKmfw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]
> Gesendet: Dienstag, 30. März 2021 um 00:07 Uhr
> Von: "Chris Murphy" <lists@colorremedies.com>
> An: "B A" <chris.std@web.de>
> Cc: "Btrfs BTRFS" <linux-btrfs@vger.kernel.org>
> Betreff: Re: Help needed with filesystem errors: parent transid verify failed
>
> On Sun, Mar 28, 2021 at 9:41 AM B A <chris.std@web.de> wrote:
> >
> > * Samsung 840 series SSD (SMART data looks fine)
>
> EVO or PRO? And what does its /proc/mounts line look like?
Model is MZ-7TD500, which seems to be an EVO. Firmware is DXT08B0Q.
From /etc/fstab:
UUID=1a149bda-057d-4775-ba66-1bf259fce9a5 / btrfs subvol=root-f23,x-systemd.device-timeout=0,compress=lzo,ssd,noatime 0 0
UUID=1b1f5c60-57f3-435c-b73e-2de727a302e2 /boot ext4 nosuid,noexec,nodev 1 2
UUID=1a149bda-057d-4775-ba66-1bf259fce9a5 /home btrfs subvol=home,x-systemd.device-timeout=0,compress=lzo,ssd,nosuid,nodev,noatime 0 0
UUID=1a149bda-057d-4775-ba66-1bf259fce9a5 /var btrfs subvol=var-f23,x-systemd.device-timeout=0,compress=lzo,ssd,nosuid,noexec,nodev,noatime 0 0
> Total_LBAs_Written?
Raw value: 92857573119
(full output in attached file)
Kind regards,
Chris
[-- Attachment #2: smartctl_-all.txt --]
[-- Type: text/plain, Size: 4555 bytes --]
smartctl 7.2 2021-01-17 r5171 [x86_64-linux-5.8.15-301.fc33.x86_64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 Series
Serial Number: [removed]
LU WWN Device Id: [removed]
Firmware Version: DXT08B0Q
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Mar 30 04:37:16 2021 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (53956) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 12588
12 Power_Cycle_Count 0x0032 091 091 000 Old_age Always - 8958
177 Wear_Leveling_Count 0x0013 089 089 000 Pre-fail Always - 131
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 073 051 000 Old_age Always - 27
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always - 4
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always - 1958
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 92857573119
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1935 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
next prev parent reply other threads:[~2021-03-30 8:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-28 15:40 Help needed with filesystem errors: parent transid verify failed B A
2021-03-29 1:02 ` Chris Murphy
2021-03-29 1:12 ` Chris Murphy
2021-03-29 7:34 ` Aw: " B A
2021-03-29 8:09 ` Chris Murphy
2021-03-29 8:42 ` Aw: " B A
2021-03-29 13:36 ` Josef Bacik
2021-04-01 12:36 ` Aw: " B A
2021-03-29 7:36 ` Aw: " B A
2021-03-30 0:07 ` Chris Murphy
2021-03-30 8:44 ` B A [this message]
2021-03-30 20:17 ` Chris Murphy
2021-04-01 12:42 ` Aw: " B A
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=trinity-6258eac7-550c-402f-9280-6f529e372d32-1617093845116@3c-app-webde-bs38 \
--to=chris.std@web.de \
--cc=linux-btrfs@vger.kernel.org \
--cc=lists@colorremedies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.