All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: ap4evb: Add MMC support
Date: Thu, 13 May 2010 01:08:21 +0000	[thread overview]
Message-ID: <ubpcklibe.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <uhbpex68f.wl%morimoto.kuninori@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
This patch is depend on Goda-san's
"Add support MMCIF for SuperH" patch

 arch/arm/mach-shmobile/board-ap4evb.c |   67 +++++++++++++++++++++++++++++++++
 1 files changed, 67 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index a553c16..0e74161 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -26,6 +26,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/io.h>
@@ -107,6 +109,18 @@
  * S39: bit2: off
  */
 
+/*
+ * MMC (CN7)
+ *
+ * J22 : 1-2: 1.8v for MMC
+ *       2-3: 3.3v for MMC
+ * SW1 : OFF
+ * SW33: bit1: OFF
+ *       bit2: ON
+ *       bit3: ON
+ *       bit4: X
+ */
+
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -225,6 +239,46 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xE6BD0000,
+		.end	= 0xE6BD00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= 198,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= 199,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
 /* SDHI0 */
 static struct resource sdhi0_resources[] = {
 	[0] = {
@@ -350,6 +404,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
 	&sdhi0_device,
 	&usb1_host_device,
 	&fsi_device,
+	&sh_mmcif_device
 };
 
 /* TouchScreen (Needs SW3 set to OFF) */
@@ -485,6 +540,18 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_IRQ28_123, NULL);
 	set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
 
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+
 	/* USB enable */
 	gpio_request(GPIO_FN_VBUS0_1,    NULL);
 	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-- 
1.7.0.4


  parent reply	other threads:[~2010-05-13  1:08 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-02-18  7:44 [PATCH] ARM: mach-shmobile: ap4evb: Add SCIFA0 support Kuninori Morimoto
2010-02-18  8:58 ` [PATCH] ARM: mach-shmobile: ap4evb: Add tiny document Kuninori Morimoto
2010-02-18  9:32 ` [PATCH] ARM: mach-shmobile: ap4evb: Add SCIFA0 support Paul Mundt
2010-02-23  7:07 ` [PATCH] ARM: mach-shmobile: ap4evb: Add KEYSC support Kuninori Morimoto
2010-02-23  7:53 ` Kuninori Morimoto
2010-02-25  7:55 ` Paul Mundt
2010-03-12 10:07 ` [PATCH] ARM: mach-shmobile: ap4evb: Add SW43, SW3 tiny document Kuninori Morimoto
2010-05-13  1:08 ` [PATCH] ARM: mach-shmobile: ap4evb: Add FSI2 support Kuninori Morimoto
2010-05-13  1:08 ` Kuninori Morimoto [this message]
2010-05-20  3:16 ` Paul Mundt
2010-05-31  4:49 ` [PATCH] ARM: mach-shmobile: ap4evb: Add MMC support Paul Mundt
2010-06-04  3:15 ` [PATCH] ARM: mach-shmobile: ap4evb: Add LCD panel selection Kuninori Morimoto
2010-06-04  5:20 ` Paul Mundt
2010-07-14  7:01 ` [PATCH] ARM: mach-shmobile: ap4evb: Add ts_get_pendown_state for Kuninori Morimoto
2010-07-14  7:01 ` Kuninori Morimoto
2010-10-18 10:13 ` [PATCH] ARM: mach-shmobile: ap4evb: Add HDMI sound support Kuninori Morimoto
2010-10-31 14:54 ` Paul Mundt
2010-11-15  3:11 ` [PATCH] ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate Kuninori Morimoto
2010-11-15  5:43 ` Paul Mundt
2010-11-16  4:12 ` [PATCH] ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate fixup Kuninori Morimoto
2010-11-16  4:30 ` Paul Mundt
2010-11-16  6:22 ` Kuninori Morimoto
2010-11-16  6:24 ` Paul Mundt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ubpcklibe.wl%kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.