From: Junio C Hamano <gitster@pobox.com>
To: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Cc: git@vger.kernel.org
Subject: Re: [PATCH v3 1/7] remote: add reflog check for "force-if-includes"
Date: Mon, 14 Sep 2020 13:31:47 -0700 [thread overview]
Message-ID: <xmqq5z8gje18.fsf@gitster.c.googlers.com> (raw)
In-Reply-To: 20200913145413.18351-2-shrinidhi.kaushik@gmail.com
Srinidhi Kaushik <shrinidhi.kaushik@gmail.com> writes:
> The struct "ref" has three new bit-fields:
> * if_includes: Set when we have to run the new check on the ref.
> * is_tracking: Set when the remote ref was marked as "use_tracking"
> or "use_tracking_for_rest" by compare-and-swap.
... meaning that --force-with-lease with an explicit "the tip must
still be at this exact commit" won't use the extra check to loosen
the condition? That sounds sensible.
> * unreachable: Set if the ref is unreachable from any of the "reflog"
> entries of its local counterpart.
The same comment applies on "reflog of which branch should we
check"; I suspect that checking HEAD and without checking merge base
may prove to be a good way to go.
> + */
> +void apply_push_force_if_includes(struct ref*, int);
SP between ref and '*'?
next prev parent reply other threads:[~2020-09-14 20:31 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-04 18:51 [PATCH] push: make `--force-with-lease[=<ref>]` safer Srinidhi Kaushik
2020-09-07 15:23 ` Phillip Wood
2020-09-08 15:48 ` Srinidhi Kaushik
2020-09-07 16:14 ` Junio C Hamano
2020-09-08 16:00 ` Srinidhi Kaushik
2020-09-08 21:00 ` Junio C Hamano
2020-09-07 19:45 ` Johannes Schindelin
2020-09-08 15:58 ` Junio C Hamano
2020-09-09 3:40 ` Johannes Schindelin
2020-09-08 16:59 ` Srinidhi Kaushik
2020-09-16 11:55 ` Johannes Schindelin
2020-09-08 19:34 ` Junio C Hamano
2020-09-09 3:44 ` Johannes Schindelin
2020-09-10 10:22 ` Johannes Schindelin
2020-09-10 14:44 ` Srinidhi Kaushik
2020-09-11 22:16 ` Johannes Schindelin
2020-09-14 11:06 ` Srinidhi Kaushik
2020-09-14 20:08 ` Junio C Hamano
2020-09-16 5:31 ` Srinidhi Kaushik
2020-09-16 10:20 ` Johannes Schindelin
2020-09-19 17:48 ` Junio C Hamano
2020-09-10 14:46 ` Junio C Hamano
2020-09-11 22:17 ` Johannes Schindelin
2020-09-14 20:07 ` Junio C Hamano
2020-09-12 15:04 ` [PATCH v2 0/2] push: make "--force-with-lease" safer Srinidhi Kaushik
2020-09-12 15:04 ` [PATCH v2 1/2] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-12 18:20 ` Junio C Hamano
2020-09-12 21:25 ` Srinidhi Kaushik
2020-09-12 15:04 ` [PATCH v2 2/2] push: enable "forceIfIncludesWithLease" by default Srinidhi Kaushik
2020-09-12 18:22 ` Junio C Hamano
2020-09-12 18:15 ` [PATCH v2 0/2] push: make "--force-with-lease" safer Junio C Hamano
2020-09-12 21:03 ` Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 0/7] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 1/7] remote: add reflog check for "force-if-includes" Srinidhi Kaushik
2020-09-14 20:17 ` Junio C Hamano
2020-09-16 10:51 ` Srinidhi Kaushik
2020-09-14 20:31 ` Junio C Hamano [this message]
2020-09-14 21:13 ` Junio C Hamano
2020-09-16 12:35 ` Johannes Schindelin
2020-09-19 17:01 ` Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 2/7] transport: add flag for "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 3/7] send-pack: check ref status for "force-if-includes" Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 4/7] transport-helper: update " Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 5/7] builtin/push: add option "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-16 12:36 ` Johannes Schindelin
2020-09-13 14:54 ` [PATCH v3 6/7] doc: add reference for "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-14 21:01 ` Junio C Hamano
2020-09-16 5:35 ` Srinidhi Kaushik
2020-09-13 14:54 ` [PATCH v3 7/7] t: add tests for "force-if-includes" Srinidhi Kaushik
2020-09-16 12:47 ` [PATCH v3 0/7] push: add "--[no-]force-if-includes" Johannes Schindelin
2020-09-19 17:03 ` [PATCH v4 0/3] " Srinidhi Kaushik
2020-09-19 17:03 ` [PATCH v4 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-09-19 20:03 ` Junio C Hamano
2020-09-21 8:42 ` Srinidhi Kaushik
2020-09-21 18:48 ` Junio C Hamano
2020-09-23 10:22 ` Srinidhi Kaushik
2020-09-23 16:47 ` Junio C Hamano
2020-09-21 13:19 ` Phillip Wood
2020-09-21 16:12 ` Junio C Hamano
2020-09-21 18:11 ` Junio C Hamano
2020-09-23 10:27 ` Srinidhi Kaushik
2020-09-19 17:03 ` [PATCH v4 2/3] push: parse and set flag " Srinidhi Kaushik
2020-09-19 20:26 ` Junio C Hamano
2020-09-19 17:03 ` [PATCH v4 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-09-19 20:42 ` Junio C Hamano
2020-09-23 7:30 ` [PATCH v5 0/3] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-23 7:30 ` [PATCH v5 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-09-23 10:18 ` Phillip Wood
2020-09-23 11:26 ` Srinidhi Kaushik
2020-09-23 16:24 ` Junio C Hamano
2020-09-23 16:29 ` Junio C Hamano
2020-09-23 7:30 ` [PATCH v5 2/3] push: parse and set flag " Srinidhi Kaushik
2020-09-23 7:30 ` [PATCH v5 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-09-23 10:24 ` Phillip Wood
2020-09-26 10:13 ` [PATCH v6 0/3] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-26 10:13 ` [PATCH v6 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-09-26 10:13 ` [PATCH v6 2/3] push: parse and set flag " Srinidhi Kaushik
2020-09-26 10:13 ` [PATCH v6 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-09-26 10:21 ` [PATCH v6 0/3] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-26 11:46 ` [PATCH v7 " Srinidhi Kaushik
2020-09-26 11:46 ` [PATCH v7 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-09-26 23:42 ` Junio C Hamano
2020-09-27 12:27 ` Srinidhi Kaushik
2020-09-26 11:46 ` [PATCH v7 2/3] push: parse and set flag " Srinidhi Kaushik
2020-09-26 11:46 ` [PATCH v7 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-09-27 14:17 ` [PATCH v8 0/3] push: add "--[no-]force-if-includes" Srinidhi Kaushik
2020-09-27 14:17 ` [PATCH v8 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-09-27 14:17 ` [PATCH v8 2/3] push: parse and set flag " Srinidhi Kaushik
2020-09-27 14:17 ` [PATCH v8 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-09-30 12:54 ` Philip Oakley
2020-09-30 14:27 ` Srinidhi Kaushik
2020-09-28 17:31 ` [PATCH v8 0/3] push: add "--[no-]force-if-includes" Junio C Hamano
2020-09-28 17:46 ` SZEDER Gábor
2020-09-28 19:34 ` Srinidhi Kaushik
2020-09-28 19:51 ` Junio C Hamano
2020-09-28 20:00 ` Junio C Hamano
2020-10-01 8:21 ` [PATCH v9 " Srinidhi Kaushik
2020-10-01 8:21 ` [PATCH v9 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-10-02 13:52 ` Johannes Schindelin
2020-10-02 14:50 ` Johannes Schindelin
2020-10-02 16:22 ` Junio C Hamano
2020-10-02 15:07 ` Srinidhi Kaushik
2020-10-02 16:41 ` Junio C Hamano
2020-10-02 19:39 ` Srinidhi Kaushik
2020-10-02 20:14 ` Junio C Hamano
2020-10-02 20:58 ` Srinidhi Kaushik
2020-10-02 21:36 ` Junio C Hamano
2020-10-02 16:26 ` Junio C Hamano
2020-10-01 8:21 ` [PATCH v9 2/3] push: parse and set flag " Srinidhi Kaushik
2020-10-01 8:21 ` [PATCH v9 3/3] t, doc: update tests, reference " Srinidhi Kaushik
2020-10-01 15:46 ` [PATCH v9 0/3] push: add "--[no-]force-if-includes" Junio C Hamano
2020-10-01 17:12 ` Junio C Hamano
2020-10-01 17:54 ` Srinidhi Kaushik
2020-10-01 18:32 ` Junio C Hamano
2020-10-02 16:50 ` Junio C Hamano
2020-10-02 19:42 ` Srinidhi Kaushik
2020-10-03 12:10 ` [PATCH v10 " Srinidhi Kaushik
2020-10-03 12:10 ` [PATCH v10 1/3] push: add reflog check for "--force-if-includes" Srinidhi Kaushik
2020-10-03 12:10 ` [PATCH v10 2/3] push: parse and set flag " Srinidhi Kaushik
2020-10-03 12:10 ` [PATCH v10 3/3] t, doc: update tests, reference " Srinidhi Kaushik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=xmqq5z8gje18.fsf@gitster.c.googlers.com \
--to=gitster@pobox.com \
--cc=git@vger.kernel.org \
--cc=shrinidhi.kaushik@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.