All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ricard Wanderlof <ricard.wanderlof@axis.com>
To: alsa-devel <alsa-devel@alsa-project.org>,
	Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>
Subject: [PATCH] ASoC: adau17x1: Workaround for noise bug in ADC
Date: Thu, 7 Sep 2017 15:31:38 +0200	[thread overview]
Message-ID: <alpine.DEB.2.11.1709061745140.14549@lnxricardw1.se.axis.com> (raw)


The ADC in the ADAU1361 (and possibly other Analog Devices codecs) 
exhibits a cyclic variation in the noise floor (in our test setup between 
-87 and -93 dB), a new value being attained within this range whenever a 
new capture stream is started. The cycle repeats after about 10 or 11 
restarts.

The workaround recommended by the manufacturer is to toggle the ADOSR bit 
in the Converter Control 0 register each time a new capture stream is 
started.

I have verified that the patch fixes this problem on the ADAU1361, and 
according to the manufacturer toggling the bit in question in this manner 
will at least have no detrimental effect on other chips served by this 
driver.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
---
diff --git a/sound/soc/codecs/adau17x1.c b/sound/soc/codecs/adau17x1.c
index 2c1bd27..6758f78 100644
--- a/sound/soc/codecs/adau17x1.c
+++ b/sound/soc/codecs/adau17x1.c
@@ -90,6 +90,27 @@ static int adau17x1_pll_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int adau17x1_adc_fixup(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
+	struct adau *adau = snd_soc_codec_get_drvdata(codec);
+
+	/*
+	 * If we are capturing, toggle the ADOSR bit in Converter Control 0 to
+	 * avoid losing SNR (workaround from ADI). This must be done after
+	 * the ADC(s) have been enabled. According to the data sheet, it is
+	 * normally illegal to set this bit when the sampling rate is 96 kHz,
+	 * but according to ADI it is acceptable for this workaround.
+	 */
+	regmap_update_bits(adau->regmap, ADAU17X1_CONVERTER0,
+		ADAU17X1_CONVERTER0_ADOSR, ADAU17X1_CONVERTER0_ADOSR);
+	regmap_update_bits(adau->regmap, ADAU17X1_CONVERTER0,
+		ADAU17X1_CONVERTER0_ADOSR, 0);
+
+	return 0;
+}
+
 static const char * const adau17x1_mono_stereo_text[] = {
 	"Stereo",
 	"Mono Left Channel (L+R)",
@@ -121,7 +142,8 @@ static const struct snd_soc_dapm_widget adau17x1_dapm_widgets[] = {
 	SND_SOC_DAPM_MUX("Right DAC Mode Mux", SND_SOC_NOPM, 0, 0,
 		&adau17x1_dac_mode_mux),
 
-	SND_SOC_DAPM_ADC("Left Decimator", NULL, ADAU17X1_ADC_CONTROL, 0, 0),
+	SND_SOC_DAPM_ADC_E("Left Decimator", NULL, ADAU17X1_ADC_CONTROL, 0, 0,
+			   adau17x1_adc_fixup, SND_SOC_DAPM_POST_PMU),
 	SND_SOC_DAPM_ADC("Right Decimator", NULL, ADAU17X1_ADC_CONTROL, 1, 0),
 	SND_SOC_DAPM_DAC("Left DAC", NULL, ADAU17X1_DAC_CONTROL0, 0, 0),
 	SND_SOC_DAPM_DAC("Right DAC", NULL, ADAU17X1_DAC_CONTROL0, 1, 0),
diff --git a/sound/soc/codecs/adau17x1.h b/sound/soc/codecs/adau17x1.h
index bf04b7ef..db35003 100644
--- a/sound/soc/codecs/adau17x1.h
+++ b/sound/soc/codecs/adau17x1.h
@@ -129,5 +129,7 @@ bool adau17x1_has_dsp(struct adau *adau);
 
 #define ADAU17X1_CONVERTER0_CONVSR_MASK		0x7
 
+#define ADAU17X1_CONVERTER0_ADOSR		BIT(3)
+
 
 #endif

-- 
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30

             reply	other threads:[~2017-09-07 13:31 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-07 13:31 Ricard Wanderlof [this message]
2017-09-10  4:58 ` Applied "ASoC: adau17x1: Workaround for noise bug in ADC" to the asoc tree Mark Brown
2017-09-10  4:58   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.11.1709061745140.14549@lnxricardw1.se.axis.com \
    --to=ricard.wanderlof@axis.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.