Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Pargmann <mpa@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	alsa-devel@alsa-project.org, Alexander Shiyan <shc_work@mail.ru>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Timur Tabi <timur@tabi.org>,
	"Li.Xiubo@freescale.com" <Li.Xiubo@freescale.com>,
	kernel@pengutronix.de, Nicolin Chen <Guangyu.Chen@freescale.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 13/18] ASoC: fsl-ssi: set bitclock in master mode from hw_params
Date: Mon, 14 Apr 2014 15:35:43 +0200
Message-ID: <1397482548-28463-14-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1397482548-28463-1-git-send-email-mpa@pengutronix.de>

From: Sascha Hauer <s.hauer@pengutronix.de>

The fsl_ssi driver uses the .set_sysclk callback to configure the
bitclock for master mode. This is unnecessary since the bitclock
is known in hw_params. This patch removes the .set_sysclk callback
and configures the bitclock from .hw_params.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 74f5a91..e3a93f0 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -533,7 +533,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
 }
 
 /**
- * fsl_ssi_set_dai_sysclk - configure Digital Audio Interface bit clock
+ * fsl_ssi_set_bclk - configure Digital Audio Interface bit clock
  *
  * Note: This function can be only called when using SSI as DAI master
  *
@@ -541,8 +541,8 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
  * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels
  * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK.
  */
-static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
-				  int clk_id, unsigned int freq, int dir)
+static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
+		struct snd_soc_dai *cpu_dai, unsigned int freq)
 {
 	struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai);
 	struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
@@ -607,7 +607,7 @@ static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	mask = CCSR_SSI_SxCCR_PM_MASK | CCSR_SSI_SxCCR_DIV2 |
 		CCSR_SSI_SxCCR_PSR;
 
-	if (dir == SND_SOC_CLOCK_OUT || synchronous)
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || synchronous)
 		write_ssi_mask(&ssi->stccr, mask, stccr);
 	else
 		write_ssi_mask(&ssi->srccr, mask, stccr);
@@ -651,6 +651,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 		snd_pcm_format_width(params_format(hw_params));
 	u32 wl = CCSR_SSI_SxCCR_WL(sample_size);
 	int enabled = read_ssi(&ssi->scr) & CCSR_SSI_SCR_SSIEN;
+	int ret;
 
 	/*
 	 * If we're in synchronous mode, and the SSI is already enabled,
@@ -659,6 +660,14 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream,
 	if (enabled && ssi_private->cpu_dai_drv.symmetric_rates)
 		return 0;
 
+	if (fsl_ssi_is_i2s_master(ssi_private)) {
+		ret = fsl_ssi_set_bclk(substream, cpu_dai,
+				params_channels(hw_params) * 32 *
+				params_rate(hw_params));
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * FIXME: The documentation says that SxCCR[WL] should not be
 	 * modified while the SSI is enabled.  The only time this can
@@ -953,7 +962,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = {
 	.shutdown	= fsl_ssi_shutdown,
 	.hw_params	= fsl_ssi_hw_params,
 	.set_fmt	= fsl_ssi_set_dai_fmt,
-	.set_sysclk	= fsl_ssi_set_dai_sysclk,
 	.set_tdm_slot	= fsl_ssi_set_dai_tdm_slot,
 	.trigger	= fsl_ssi_trigger,
 };
-- 
1.9.1

  parent reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-14 13:35 [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 01/18] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 02/18] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 03/18] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 05/18] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 06/18] ASoC: fsl-ssi: Cleanup probe function Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 07/18] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 08/18] ASoC: fsl-ssi: introduce SoC specific data Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-04-14 15:28   ` Nicolin Chen
2014-04-16  7:27     ` Markus Pargmann
2014-04-16  8:08       ` Nicolin Chen
2014-04-16  8:43         ` Markus Pargmann
2014-04-16  8:40           ` Nicolin Chen
2014-04-16 17:42         ` Mark Brown
2014-04-17 13:46       ` Timur Tabi
2014-04-14 13:35 ` [PATCH v3 10/18] ASoC: fsl-ssi: make fsl,mode property optional Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 11/18] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 12/18] ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann [this message]
2014-04-14 13:35 ` [PATCH v3 14/18] ASoC: fsl-ssi: remove unnecessary spinlock Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 15/18] ASoC: fsl-ssi: Allow first stream to set the bitclock Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 16/18] ASoC: fsl-ssi: Set framerate divider correctly for i2s master mode Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 17/18] ASoC: fsl-ssi: reorder and document fsl_ssi_private Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 18/18] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-04-24 11:44 ` [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Mark Brown
2014-04-28  8:54   ` Markus Pargmann
2014-04-29 16:22     ` Mark Brown
2014-04-30  2:01       ` Li.Xiubo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397482548-28463-14-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=Guangyu.Chen@freescale.com \
    --cc=Li.Xiubo@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=fabio.estevam@freescale.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shc_work@mail.ru \
    --cc=timur@tabi.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git