Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Markus Pargmann <mpa@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	alsa-devel@alsa-project.org, Alexander Shiyan <shc_work@mail.ru>,
	Timur Tabi <timur@tabi.org>,
	"Li.Xiubo@freescale.com" <Li.Xiubo@freescale.com>,
	kernel@pengutronix.de, Nicolin Chen <Guangyu.Chen@freescale.com>,
	Markus Pargmann <mpa@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 06/18] ASoC: fsl-ssi: Cleanup probe function
Date: Mon, 14 Apr 2014 15:35:36 +0200
Message-ID: <1397482548-28463-7-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1397482548-28463-1-git-send-email-mpa@pengutronix.de>

Reorder the probe function to be able to move the second imx-specific
block to the seperate imx probe function. The patch also removes some
comments/variables/code that are not used anymore or could be simply
replaced by other variables.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 113 +++++++++++++++++++++++-------------------------
 1 file changed, 53 insertions(+), 60 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 8072926..af1b82f 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -159,7 +159,6 @@ struct fsl_ssi_private {
 	bool imx_ac97;
 	bool use_dma;
 	bool baudclk_locked;
-	bool irq_stats;
 	bool offline_config;
 	bool use_dual_fifo;
 	u8 i2s_mode;
@@ -991,7 +990,7 @@ static void make_lowercase(char *s)
 }
 
 static int fsl_ssi_imx_probe(struct platform_device *pdev,
-		struct fsl_ssi_private *ssi_private)
+		struct fsl_ssi_private *ssi_private, void __iomem *iomem)
 {
 	struct device_node *np = pdev->dev.of_node;
 	u32 dmas[4];
@@ -1041,12 +1040,47 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
 		ssi_private->dma_params_rx.maxburst &= ~0x1;
 	}
 
+	if (!ssi_private->use_dma) {
+
+		/*
+		 * Some boards use an incompatible codec. To get it
+		 * working, we are using imx-fiq-pcm-audio, that
+		 * can handle those codecs. DMA is not possible in this
+		 * situation.
+		 */
+
+		ssi_private->fiq_params.irq = ssi_private->irq;
+		ssi_private->fiq_params.base = iomem;
+		ssi_private->fiq_params.dma_params_rx =
+			&ssi_private->dma_params_rx;
+		ssi_private->fiq_params.dma_params_tx =
+			&ssi_private->dma_params_tx;
+
+		ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
+		if (ret)
+			goto error_pcm;
+	} else {
+		ret = imx_pcm_dma_init(pdev);
+		if (ret)
+			goto error_pcm;
+	}
+
 	return 0;
+
+error_pcm:
+	if (!IS_ERR(ssi_private->baudclk))
+		clk_disable_unprepare(ssi_private->baudclk);
+
+	clk_disable_unprepare(ssi_private->clk);
+
+	return ret;
 }
 
 static void fsl_ssi_imx_clean(struct platform_device *pdev,
 		struct fsl_ssi_private *ssi_private)
 {
+	if (!ssi_private->use_dma)
+		imx_pcm_fiq_exit(pdev);
 	if (!IS_ERR(ssi_private->baudclk))
 		clk_disable_unprepare(ssi_private->baudclk);
 	clk_disable_unprepare(ssi_private->clk);
@@ -1056,7 +1090,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 {
 	struct fsl_ssi_private *ssi_private;
 	int ret = 0;
-	struct device_attribute *dev_attr = NULL;
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *of_id;
 	enum fsl_ssi_type hw_type;
@@ -1149,6 +1182,8 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	ssi_private->baudclk_locked = false;
 	spin_lock_init(&ssi_private->baudclk_lock);
 
+	dev_set_drvdata(&pdev->dev, ssi_private);
+
 	/*
 	 * imx51 and later SoCs have a slightly different IP that allows the
 	 * SSI configuration while the SSI unit is running.
@@ -1179,20 +1214,22 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 			hw_type == FSL_SSI_MX35) {
 		ssi_private->ssi_on_imx = true;
 
-		ret = fsl_ssi_imx_probe(pdev, ssi_private);
+		ret = fsl_ssi_imx_probe(pdev, ssi_private, ssi_private->ssi);
 		if (ret)
 			goto error_irqmap;
 	}
 
-	/*
-	 * Enable interrupts only for MCP8610 and MX51. The other MXs have
-	 * different writeable interrupt status registers.
-	 */
+	ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
+					 &ssi_private->cpu_dai_drv, 1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
+		goto error_asoc_register;
+	}
+
 	if (ssi_private->use_dma) {
 		ret = devm_request_irq(&pdev->dev, ssi_private->irq,
 					fsl_ssi_isr, 0, ssi_private->name,
 					ssi_private);
-		ssi_private->irq_stats = true;
 		if (ret < 0) {
 			dev_err(&pdev->dev, "could not claim irq %u\n",
 					ssi_private->irq);
@@ -1200,46 +1237,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Register with ASoC */
-	dev_set_drvdata(&pdev->dev, ssi_private);
-
-	ret = snd_soc_register_component(&pdev->dev, &fsl_ssi_component,
-					 &ssi_private->cpu_dai_drv, 1);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
-		goto error_dev;
-	}
-
 	ret = fsl_ssi_debugfs_create(&ssi_private->dbg_stats, &pdev->dev);
 	if (ret)
-		goto error_dbgfs;
-
-	if (ssi_private->ssi_on_imx) {
-		if (!ssi_private->use_dma) {
-
-			/*
-			 * Some boards use an incompatible codec. To get it
-			 * working, we are using imx-fiq-pcm-audio, that
-			 * can handle those codecs. DMA is not possible in this
-			 * situation.
-			 */
-
-			ssi_private->fiq_params.irq = ssi_private->irq;
-			ssi_private->fiq_params.base = ssi_private->ssi;
-			ssi_private->fiq_params.dma_params_rx =
-				&ssi_private->dma_params_rx;
-			ssi_private->fiq_params.dma_params_tx =
-				&ssi_private->dma_params_tx;
-
-			ret = imx_pcm_fiq_init(pdev, &ssi_private->fiq_params);
-			if (ret)
-				goto error_pcm;
-		} else {
-			ret = imx_pcm_dma_init(pdev);
-			if (ret)
-				goto error_pcm;
-		}
-	}
+		goto error_asoc_register;
 
 	/*
 	 * If codec-handle property is missing from SSI node, we assume
@@ -1269,32 +1269,25 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	if (IS_ERR(ssi_private->pdev)) {
 		ret = PTR_ERR(ssi_private->pdev);
 		dev_err(&pdev->dev, "failed to register platform: %d\n", ret);
-		goto error_dai;
+		goto error_sound_card;
 	}
 
 done:
 	return 0;
 
-error_dai:
-	if (ssi_private->ssi_on_imx && !ssi_private->use_dma)
-		imx_pcm_fiq_exit(pdev);
-
-error_pcm:
+error_sound_card:
 	fsl_ssi_debugfs_remove(&ssi_private->dbg_stats);
 
-error_dbgfs:
+error_irq:
 	snd_soc_unregister_component(&pdev->dev);
 
-error_dev:
-	device_remove_file(&pdev->dev, dev_attr);
-
-error_irq:
+error_asoc_register:
 	if (ssi_private->ssi_on_imx) {
 		fsl_ssi_imx_clean(pdev, ssi_private);
 	}
 
 error_irqmap:
-	if (ssi_private->irq_stats)
+	if (ssi_private->use_dma)
 		irq_dispose_mapping(ssi_private->irq);
 
 	return ret;
@@ -1313,7 +1306,7 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 	if (ssi_private->ssi_on_imx)
 		fsl_ssi_imx_clean(pdev, ssi_private);
 
-	if (ssi_private->irq_stats)
+	if (ssi_private->use_dma)
 		irq_dispose_mapping(ssi_private->irq);
 
 	return 0;
-- 
1.9.1

  parent reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-14 13:35 [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 01/18] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 02/18] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 03/18] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 04/18] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 05/18] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-04-14 13:35 ` Markus Pargmann [this message]
2014-04-14 13:35 ` [PATCH v3 07/18] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 08/18] ASoC: fsl-ssi: introduce SoC specific data Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 09/18] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-04-14 15:28   ` Nicolin Chen
2014-04-16  7:27     ` Markus Pargmann
2014-04-16  8:08       ` Nicolin Chen
2014-04-16  8:43         ` Markus Pargmann
2014-04-16  8:40           ` Nicolin Chen
2014-04-16 17:42         ` Mark Brown
2014-04-17 13:46       ` Timur Tabi
2014-04-14 13:35 ` [PATCH v3 10/18] ASoC: fsl-ssi: make fsl,mode property optional Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 11/18] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 12/18] ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 13/18] ASoC: fsl-ssi: set bitclock in master mode from hw_params Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 14/18] ASoC: fsl-ssi: remove unnecessary spinlock Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 15/18] ASoC: fsl-ssi: Allow first stream to set the bitclock Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 16/18] ASoC: fsl-ssi: Set framerate divider correctly for i2s master mode Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 17/18] ASoC: fsl-ssi: reorder and document fsl_ssi_private Markus Pargmann
2014-04-14 13:35 ` [PATCH v3 18/18] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-04-24 11:44 ` [PATCH v3 00/18] ASoC: fsl-ssi: Driver cleanup Mark Brown
2014-04-28  8:54   ` Markus Pargmann
2014-04-29 16:22     ` Mark Brown
2014-04-30  2:01       ` Li.Xiubo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397482548-28463-7-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=Guangyu.Chen@freescale.com \
    --cc=Li.Xiubo@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=fabio.estevam@freescale.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shc_work@mail.ru \
    --cc=timur@tabi.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git