[PATCH v3 8/8] dt-bindings: sound: lpass-cpu: Move to yaml format

[Rohit kumar <rohitkr@codeaurora.org>]

From: Ajit Pandey <ajitp@codeaurora.org>

Update lpass-cpu binding with yaml formats.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 .../devicetree/bindings/sound/qcom,lpass-cpu.txt   |  80 -----------
 .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 154 +++++++++++++++++++++
 2 files changed, 154 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index 04e34cc..00000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
-			  "qcom,lpass-cpu-sc7180"
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: A list which must include the following entries:
-				* "ahbix-clk"
-				* "mi2s-osr-clk"
-				* "mi2s-bit-clk"
-			: required clocks for "qcom,lpass-cpu-apq8016"
-				* "ahbix-clk"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "mi2s-bit-clk2"
-				* "mi2s-bit-clk3"
-				* "pcnoc-mport-clk"
-				* "pcnoc-sway-clk"
-
-- interrupts		: Must contain an entry for each entry in
-			  interrupt-names.
-- interrupt-names	: A list which must include the following entries:
-				* "lpass-irq-lpaif"
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "lpass-lpaif"
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp		: Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg			: Must be one of the DAI IDs
-			  (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
-			  Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines	: List of serial data lines to use for capture
-			  Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Example:
-
-lpass@28100000 {
-	compatible = "qcom,lpass-cpu";
-	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-	interrupts = <0 85 1>;
-	interrupt-names = "lpass-irq-lpaif";
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&mi2s_default>;
-	pinctrl-1 = <&mi2s_idle>;
-	reg = <0x28100000 0x10000>;
-	reg-names = "lpass-lpaif";
-	qcom,adsp = <&adsp>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* Optional to set different MI2S SD lines */
-	dai@3 {
-		reg = <MI2S_QUATERNARY>;
-		qcom,playback-sd-lines = <0 1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 00000000..9c350bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <rohitkr@codeaurora.org>
+
+description:
+  Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
+  for audio data transfer on external codecs. LPASS cpu driver is a module to
+  configure Low-Power Audio Interface(LPAIF) core registers across different
+  IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,lpass-cpu-sc7180
+
+  reg:
+    items:
+      - description: LPAIF core registers
+
+  reg-names:
+    items:
+      - const: lpass-lpaif
+
+  clocks:
+    items:
+      - description: AHBIX core clock
+      - description: oscillator clock for MI2S external interfaces
+      - description: Bit clock for single MI2S dai
+      - description: Bit clock for MI2S_PRIMARY dai interface
+      - description: Bit clock for MI2S_SECONDARY dai interface
+      - description: Bit clock for MI2S_TERTIARY dai interface
+      - description: Bit clock for MI2S_QUATERNARY dai interface
+      - description: NOC MPORT clock of LPASS core
+      - description: NOC SWAY clock of LPASS core
+
+  clock-names:
+    items:
+      - const: ahbix-clk
+      - const: mi2s-osr-clk
+      - const: mi2s-bit-clk
+      - const: mi2s-bit-clk0
+      - const: mi2s-bit-clk1
+      - const: mi2s-bit-clk2
+      - const: mi2s-bit-clk3
+      - const: pcnoc-mport-clk
+      - const: pcnoc-sway-clk
+
+  interrupts:
+    items:
+      - description: LPAIF DMA buffer interrupt
+
+  interrupt-names:
+    items:
+      - const: lpass-irq-lpaif
+
+  qcom,adsp:
+    maxItems: 1
+    description: Phandle for the audio DSP node
+
+  iommus:
+    maxItems: 1
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+    description: Phandle for power domain node
+
+  '#sound-dai-cells':
+    const: 1
+
+  child-node:
+    description: Required properties for each DAI
+    type: object
+    properties:
+      reg:
+        description: Must be one of the DAI ID
+                     (Usually part of dtbindings header)
+      qcom,playback-sd-lines:
+        description: List of serial data lines to use for playback
+                     Each SD line should be represented by a number from 0-3.
+      qcom,capture-sd-lines :
+        description: List of serial data lines to use for capture
+                     Each SD line should be represented by a number from 0-3.
+    required:
+      -reg
+    # Note that adding a subnode changes the default to "no lines configured",
+    # so both playback and capture lines should be configured when a subnode
+    # is added.
+
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - sound-dai-cells
+
+optional:
+  - qcom,adsp
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,lpass-cpu-sc7180
+
+then:
+  required:
+    - iommus
+    - power-domains
+
+examples:
+  lpass@28100000 {
+	compatible = "qcom,lpass-cpu";
+	clocks = <&lcc AHBIX_CLK>,
+		 <&lcc MI2S_OSR_CLK>,
+		 <&lcc MI2S_BIT_CLK>;
+
+	clock-names = "ahbix-clk",
+		      "mi2s-osr-clk",
+		      "mi2s-bit-clk";
+
+	interrupts = <0 85 1>;
+        interrupt-names = "lpass-irq-lpaif";
+
+	iommus = <&apps_smmu 0x1020 0>;
+	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+
+	reg = <0x28100000 0x10000>;
+	reg-names = "lpass-lpaif";
+	#sound-dai-cells = <1>;
+	qcom,adsp = <&adsp>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Optional to set different MI2S SD lines */
+	mi2s-quaternary@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <0 1>;
+  };
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.