From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
tiwai@suse.com, srinivas.kandagatla@linaro.org,
rohitkr@codeaurora.org, linux-arm-msm@vger.kernel.org,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>,
Srinivasa Rao <srivasam@codeaurora.org>
Subject: [PATCH v6 5/5] ASoC: qcom: sc7180: Add support for audio over DP
Date: Fri, 18 Sep 2020 11:34:44 +0530 [thread overview]
Message-ID: <1600409084-29093-6-git-send-email-srivasam@codeaurora.org> (raw)
In-Reply-To: <1600409084-29093-1-git-send-email-srivasam@codeaurora.org>
From: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Add support for audio playback over DP in lpass sc7180 platform driver.
Update lpass_variant structure for hdmi data configuaration.
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
---
sound/soc/qcom/lpass-sc7180.c | 116 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 102 insertions(+), 14 deletions(-)
diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c
index 167bf2c..59f115e 100644
--- a/sound/soc/qcom/lpass-sc7180.c
+++ b/sound/soc/qcom/lpass-sc7180.c
@@ -60,38 +60,65 @@ static struct snd_soc_dai_driver sc7180_lpass_cpu_dai_driver[] = {
.probe = &asoc_qcom_lpass_cpu_dai_probe,
.ops = &asoc_qcom_lpass_cpu_dai_ops,
},
+ [LPASS_DP_RX] = {
+ .id = LPASS_DP_RX,
+ .name = "Hdmi",
+ .playback = {
+ .stream_name = "Hdmi Playback",
+ .formats = SNDRV_PCM_FMTBIT_S24,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .ops = &asoc_qcom_lpass_hdmi_dai_ops,
+ },
};
static int sc7180_lpass_alloc_dma_channel(struct lpass_data *drvdata,
- int direction)
+ int direction, unsigned int dai_id)
{
struct lpass_variant *v = drvdata->variant;
int chan = 0;
- if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
- chan = find_first_zero_bit(&drvdata->dma_ch_bit_map,
- v->rdma_channels);
+ if (dai_id == LPASS_DP_RX) {
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ chan = find_first_zero_bit(&drvdata->hdmi_dma_ch_bit_map,
+ v->hdmi_rdma_channels);
+
+ if (chan >= v->hdmi_rdma_channels)
+ return -EBUSY;
+ }
+ set_bit(chan, &drvdata->hdmi_dma_ch_bit_map);
+ } else {
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ chan = find_first_zero_bit(&drvdata->dma_ch_bit_map,
+ v->rdma_channels);
if (chan >= v->rdma_channels)
return -EBUSY;
- } else {
- chan = find_next_zero_bit(&drvdata->dma_ch_bit_map,
+ } else {
+ chan = find_next_zero_bit(&drvdata->dma_ch_bit_map,
v->wrdma_channel_start +
v->wrdma_channels,
v->wrdma_channel_start);
- if (chan >= v->wrdma_channel_start + v->wrdma_channels)
- return -EBUSY;
- }
-
- set_bit(chan, &drvdata->dma_ch_bit_map);
+ if (chan >= v->wrdma_channel_start + v->wrdma_channels)
+ return -EBUSY;
+ }
+ set_bit(chan, &drvdata->dma_ch_bit_map);
+ }
return chan;
}
-static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)
+static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan, unsigned int dai_id)
{
- clear_bit(chan, &drvdata->dma_ch_bit_map);
+ if (dai_id == LPASS_DP_RX)
+ clear_bit(chan, &drvdata->hdmi_dma_ch_bit_map);
+ else
+ clear_bit(chan, &drvdata->dma_ch_bit_map);
return 0;
}
@@ -144,6 +171,9 @@ static struct lpass_variant sc7180_data = {
.rdma_reg_base = 0xC000,
.rdma_reg_stride = 0x1000,
.rdma_channels = 5,
+ .hdmi_rdma_reg_base = 0x64000,
+ .hdmi_rdma_reg_stride = 0x1000,
+ .hdmi_rdma_channels = 4,
.dmactl_audif_start = 1,
.wrdma_reg_base = 0x18000,
.wrdma_reg_stride = 0x1000,
@@ -163,7 +193,7 @@ static struct lpass_variant sc7180_data = {
.rdma_dyncclk = REG_FIELD_ID(0xC000, 21, 21, 5, 0x1000),
.rdma_bursten = REG_FIELD_ID(0xC000, 20, 20, 5, 0x1000),
.rdma_wpscnt = REG_FIELD_ID(0xC000, 16, 19, 5, 0x1000),
- .rdma_intf = REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000),
+ .rdma_intf = REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000),
.rdma_fifowm = REG_FIELD_ID(0xC000, 1, 5, 5, 0x1000),
.rdma_enable = REG_FIELD_ID(0xC000, 0, 0, 5, 0x1000),
@@ -174,6 +204,64 @@ static struct lpass_variant sc7180_data = {
.wrdma_fifowm = REG_FIELD_ID(0x18000, 1, 5, 4, 0x1000),
.wrdma_enable = REG_FIELD_ID(0x18000, 0, 0, 4, 0x1000),
+ .hdmi_tx_ctl_addr = 0x1000,
+ .hdmi_legacy_addr = 0x1008,
+ .hdmi_vbit_addr = 0x610c0,
+ .hdmi_ch_lsb_addr = 0x61048,
+ .hdmi_ch_msb_addr = 0x6104c,
+ .ch_stride = 0x8,
+ .hdmi_parity_addr = 0x61034,
+ .hdmi_dmactl_addr = 0x61038,
+ .hdmi_dma_stride = 0x4,
+ .hdmi_DP_addr = 0x610c8,
+ .hdmi_sstream_addr = 0x6101c,
+ .hdmi_irq_reg_base = 0x63000,
+ .hdmi_irq_ports = 1,
+
+ .hdmi_rdma_dyncclk = REG_FIELD_ID(0x64000, 14, 14, 4, 0x1000),
+ .hdmi_rdma_bursten = REG_FIELD_ID(0x64000, 13, 13, 4, 0x1000),
+ .hdmi_rdma_burst8 = REG_FIELD_ID(0x64000, 15, 15, 4, 0x1000),
+ .hdmi_rdma_burst16 = REG_FIELD_ID(0x64000, 16, 16, 4, 0x1000),
+ .hdmi_rdma_dynburst = REG_FIELD_ID(0x64000, 18, 18, 4, 0x1000),
+ .hdmi_rdma_wpscnt = REG_FIELD_ID(0x64000, 10, 12, 4, 0x1000),
+ .hdmi_rdma_fifowm = REG_FIELD_ID(0x64000, 1, 5, 4, 0x1000),
+ .hdmi_rdma_enable = REG_FIELD_ID(0x64000, 0, 0, 4, 0x1000),
+
+ .sstream_en = REG_FIELD(0x6101c, 0, 0),
+ .dma_sel = REG_FIELD(0x6101c, 1, 2),
+ .auto_bbit_en = REG_FIELD(0x6101c, 3, 3),
+ .layout = REG_FIELD(0x6101c, 4, 4),
+ .layout_sp = REG_FIELD(0x6101c, 5, 8),
+ .set_sp_on_en = REG_FIELD(0x6101c, 10, 10),
+ .dp_audio = REG_FIELD(0x6101c, 11, 11),
+ .dp_staffing_en = REG_FIELD(0x6101c, 12, 12),
+ .dp_sp_b_hw_en = REG_FIELD(0x6101c, 13, 13),
+
+ .mute = REG_FIELD(0x610c8, 0, 0),
+ .as_sdp_cc = REG_FIELD(0x610c8, 1, 3),
+ .as_sdp_ct = REG_FIELD(0x610c8, 4, 7),
+ .aif_db4 = REG_FIELD(0x610c8, 8, 15),
+ .frequency = REG_FIELD(0x610c8, 16, 21),
+ .mst_index = REG_FIELD(0x610c8, 28, 29),
+ .dptx_index = REG_FIELD(0x610c8, 30, 31),
+
+ .soft_reset = REG_FIELD(0x1000, 31, 31),
+ .force_reset = REG_FIELD(0x1000, 30, 30),
+
+ .use_hw_chs = REG_FIELD(0x61038, 0, 0),
+ .use_hw_usr = REG_FIELD(0x61038, 1, 1),
+ .hw_chs_sel = REG_FIELD(0x61038, 2, 4),
+ .hw_usr_sel = REG_FIELD(0x61038, 5, 6),
+
+ .replace_vbit = REG_FIELD(0x610c0, 0, 0),
+ .vbit_stream = REG_FIELD(0x610c0, 1, 1),
+
+ .legacy_en = REG_FIELD(0x1008, 0, 0),
+ .calc_en = REG_FIELD(0x61034, 0, 0),
+ .lsb_bits = REG_FIELD(0x61048, 0, 31),
+ .msb_bits = REG_FIELD(0x6104c, 0, 31),
+
+
.clk_name = (const char*[]) {
"pcnoc-sway-clk",
"audio-core",
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
prev parent reply other threads:[~2020-09-18 6:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-18 6:04 [PATCH v6 0/5] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port Srinivasa Rao Mandadapu
2020-09-18 6:04 ` [PATCH v6 1/5] ASoC: Add sc7180-lpass binding header hdmi define Srinivasa Rao Mandadapu
2020-09-18 6:04 ` [PATCH v6 2/5] ASoC: dt-bindings: Add dt binding for lpass hdmi Srinivasa Rao Mandadapu
2020-09-23 20:41 ` Rob Herring
2020-09-18 6:04 ` [PATCH v6 3/5] Asoc:qcom:lpass-cpu:Update dts property read API Srinivasa Rao Mandadapu
2020-09-21 21:20 ` Srinivas Kandagatla
2020-09-22 11:08 ` Mark Brown
2020-09-22 11:22 ` Srinivas Kandagatla
2020-09-22 11:43 ` Mark Brown
2020-09-22 12:53 ` Rohit Kumar
2020-09-22 13:57 ` Srinivas Kandagatla
2020-09-18 6:04 ` [PATCH v6 4/5] ASoC: qcom: Add support for lpass hdmi driver Srinivasa Rao Mandadapu
2020-09-21 21:20 ` Srinivas Kandagatla
2020-09-23 8:41 ` Srinivasa Rao Mandadapu
2020-09-18 6:04 ` Srinivasa Rao Mandadapu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1600409084-29093-6-git-send-email-srivasam@codeaurora.org \
--to=srivasam@codeaurora.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=rohitkr@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
--cc=vsujithk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).