Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] Asoc: qcom: lpass-cpu: Fix dp audio failure on monitors
@ 2020-10-13 13:45 Srinivasa Rao Mandadapu
  0 siblings, 0 replies; only message in thread
From: Srinivasa Rao Mandadapu @ 2020-10-13 13:45 UTC (permalink / raw)
  To: agross, bjorn.andersson, lgirdwood, broonie, robh+dt, plai,
	bgoswami, perex, tiwai, srinivas.kandagatla, rohitkr,
	linux-arm-msm, alsa-devel, devicetree, linux-kernel
  Cc: V Sujith Kumar Reddy, Srinivasa Rao Mandadapu

From: V Sujith Kumar Reddy <vsujithk@codeaurora.org>

Make LPASS_HDMI_TX_PARITY_ADDR reg as volatile to fix
dp audio failure with external monitors.
This patch is upgrade to below patch series.
https://lore.kernel.org/patchwork/project/lkml/list/?series=466460

Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
---
 sound/soc/qcom/lpass-cpu.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index ba2aca3..78de888 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -660,6 +660,8 @@ static bool lpass_hdmi_regmap_volatile(struct device *dev, unsigned int reg)
 		return true;
 	if (reg == LPASS_HDMI_TX_LEGACY_ADDR(v))
 		return true;
+	if (reg == LPASS_HDMI_TX_PARITY_ADDR(v))
+		return true;
 
 	for (i = 0; i < v->rdma_channels; ++i) {
 		if (reg == LPAIF_HDMI_RDMACURR_REG(v, i))
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13 13:45 [PATCH] Asoc: qcom: lpass-cpu: Fix dp audio failure on monitors Srinivasa Rao Mandadapu

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git