[PATCH] ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field

[PATCH] ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field

[Srinivas Kandagatla]

BIT_WIDTH field in I2S_CTL register is two bits wide, however
recent regmap field conversion patch trimmed it down to one bit.
Fix this by correcting the bit range!

Fixes: b5022a36d28f ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-ipq806x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
index 92f98b4df47f..ef8a7984f232 100644
--- a/sound/soc/qcom/lpass-ipq806x.c
+++ b/sound/soc/qcom/lpass-ipq806x.c
@@ -131,7 +131,7 @@ static struct lpass_variant ipq806x_data = {
 	.micmode		= REG_FIELD_ID(0x0010, 4, 7, 5, 0x4),
 	.micmono		= REG_FIELD_ID(0x0010, 3, 3, 5, 0x4),
 	.wssrc			= REG_FIELD_ID(0x0010, 2, 2, 5, 0x4),
-	.bitwidth		= REG_FIELD_ID(0x0010, 0, 0, 5, 0x4),
+	.bitwidth		= REG_FIELD_ID(0x0010, 0, 1, 5, 0x4),
 
 	.rdma_dyncclk		= REG_FIELD_ID(0x6000, 12, 12, 4, 0x1000),
 	.rdma_bursten		= REG_FIELD_ID(0x6000, 11, 11, 4, 0x1000),
-- 
2.21.0

Re: [PATCH] ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field

[Mark Brown]

On Tue, 19 Jan 2021 17:47:00 +0000, Srinivas Kandagatla wrote:
> BIT_WIDTH field in I2S_CTL register is two bits wide, however
> recent regmap field conversion patch trimmed it down to one bit.
> Fix this by correcting the bit range!

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field
      commit: 1e066a23e76f90c9c39c189fe0dbf7c6e3dd5044

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark