Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Wu Fengguang <fengguang.wu@intel.com>
To: Keith Packard <keithp@keithp.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	"Wang, Zhenyu Z" <zhenyu.z.wang@intel.com>,
	"intel-gfx@lists.freedesktop..."
	<intel-gfx@lists.freedesktop.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	Ben Skeggs <bskeggs@redhat.com>,
	Christopher White <c.white@pulseforce.com>,
	Jeremy Bush <contractfrombelow@gmail.com>,
	"Fu, Michael" <michael.fu@intel.com>,
	"Bossart, Pierre-louis" <pierre-louis.bossart@intel.com>
Subject: [PATCH v4] drm/i915: pass ELD to HDMI/DP audio driver
Date: Fri, 2 Sep 2011 16:14:28 +0800
Message-ID: <20110902081428.GA19621@localhost> (raw)

Add ELD support for Intel Eaglelake, IbexPeak/Ironlake,
SandyBridge/CougarPoint and IvyBridge/PantherPoint chips.

ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio
capabilities of the plugged monitor. It's built and passed to audio
driver in 2 steps:

(1) at get_modes time, parse EDID and save ELD to drm_connector.eld[]

(2) at mode_set time, write drm_connector.eld[] to the Transcoder's hw
    ELD buffer and set the ELD_valid bit to inform HDMI/DP audio driver

ELD selection policy: it's possible for one encoder to be associated
with multiple connectors (ie. monitors), in which case the first found
ELD will be used. This policy may not be suitable for all users, but
let's start it simple first.

The impact of ELD selection policy: assume there are two monitors, one
supports stereo playback and the other has 8-channel output; cloned
display mode is used, so that the two monitors are associated with the
same internal encoder. If only the stereo playback capability is reported,
the user won't be able to start 8-channel playback; if the 8-channel ELD
is reported, then user space applications may send 8-channel samples
down, however the user may actually be listening to the 2-channel
monitor and not connecting speakers to the 8-channel monitor. Overall,
it's more safe to report maximum profiles to the user space, so that
the user can at least be able to do 8-channel playback if he want to.

This patch is tested OK on G45/HDMI, IbexPeak/HDMI and IvyBridge/HDMI+DP.

Minor imperfection: the GEN6_AUD_CNTL_ST/DIP_Port_Select field always
reads 0 (reserved). Without knowing the port number, I worked it around
by setting the ELD_valid bit for ALL the three ports. It's tested to not
be a problem, because the audio driver will find invalid ELD data and
hence rightfully abort, even when it sees the ELD_valid indicator.

Thanks to Zhenyu and Bossart for a lot of valuable help and testing.

CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Wang Zhenyu <zhenyu.z.wang@intel.com>
CC: Jeremy Bush <contractfrombelow@gmail.com>
CC: Christopher White <c.white@pulseforce.com>
CC: "Bossart, Pierre-louis" <pierre-louis.bossart@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
 drivers/gpu/drm/drm_edid.c           |  171 +++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_drv.h      |    2 
 drivers/gpu/drm/i915/i915_reg.h      |   25 +++
 drivers/gpu/drm/i915/intel_display.c |  132 +++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c      |    6 
 drivers/gpu/drm/i915/intel_drv.h     |    2 
 drivers/gpu/drm/i915/intel_hdmi.c    |    3 
 drivers/gpu/drm/i915/intel_modes.c   |    2 
 include/drm/drm_crtc.h               |    9 +
 include/drm/drm_edid.h               |    9 +
 10 files changed, 359 insertions(+), 2 deletions(-)

--- linux-next.orig/drivers/gpu/drm/drm_edid.c	2011-09-02 15:59:35.000000000 +0800
+++ linux-next/drivers/gpu/drm/drm_edid.c	2011-09-02 15:59:40.000000000 +0800
@@ -1319,6 +1319,7 @@ add_detailed_modes(struct drm_connector 
 #define HDMI_IDENTIFIER 0x000C03
 #define AUDIO_BLOCK	0x01
 #define VENDOR_BLOCK    0x03
+#define SPEAKER_BLOCK	0x04
 #define EDID_BASIC_AUDIO	(1 << 6)
 
 /**
@@ -1347,6 +1348,176 @@ u8 *drm_find_cea_extension(struct edid *
 }
 EXPORT_SYMBOL(drm_find_cea_extension);
 
+static void
+parse_hdmi_vsdb(struct drm_connector *connector, uint8_t *db)
+{
+	connector->eld[5] |= (db[6] >> 7) << 1;  /* Supports_AI */
+
+	connector->dvi_dual = db[6] & 1;
+	connector->max_tmds_clock = db[7] * 5;
+
+	connector->latency_present[0] = db[8] >> 7;
+	connector->latency_present[1] = (db[8] >> 6) & 1;
+	connector->video_latency[0] = db[9];
+	connector->audio_latency[0] = db[10];
+	connector->video_latency[1] = db[11];
+	connector->audio_latency[1] = db[12];
+
+	DRM_LOG_KMS("HDMI: DVI dual %d, "
+		    "max TMDS clock %d, "
+		    "latency present %d %d, "
+		    "video latency %d %d, "
+		    "audio latency %d %d\n",
+		    connector->dvi_dual,
+		    connector->max_tmds_clock,
+	      (int) connector->latency_present[0],
+	      (int) connector->latency_present[1],
+		    connector->video_latency[0],
+		    connector->video_latency[1],
+		    connector->audio_latency[0],
+		    connector->audio_latency[1]);
+}
+
+static void
+monitor_name(struct detailed_timing *t, void *data)
+{
+	if (t->data.other_data.type == EDID_DETAIL_MONITOR_NAME)
+		*(u8 **)data = t->data.other_data.data.str.str;
+}
+
+/**
+ * drm_edid_to_eld - build ELD from EDID
+ * @connector: connector corresponding to the HDMI/DP sink
+ * @edid: EDID to parse
+ *
+ * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver.
+ * Some ELD fields are left to the graphics driver caller:
+ * - Conn_Type
+ * - HDCP
+ * - Port_ID
+ */
+void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
+{
+	uint8_t *eld = connector->eld;
+	u8 *cea;
+	u8 *name;
+	u8 *db;
+	int sad_count = 0;
+	int mnl;
+	int dbl;
+
+	memset(eld, 0, sizeof(connector->eld));
+
+	cea = drm_find_cea_extension(edid);
+	if (!cea) {
+		DRM_DEBUG_KMS("ELD: no CEA Extension found\n");
+		return;
+	}
+
+	name = NULL;
+	drm_for_each_detailed_block((u8 *)edid, monitor_name, &name);
+	for (mnl = 0; name && mnl < 13; mnl++) {
+		if (name[mnl] == 0x0a)
+			break;
+		eld[20 + mnl] = name[mnl];
+	}
+	eld[4] = (cea[1] << 5) | mnl;
+	DRM_DEBUG_KMS("ELD monitor %s\n", eld + 20);
+
+	eld[0] = 2 << 3;		/* ELD version: 2 */
+
+	eld[16] = edid->mfg_id[0];
+	eld[17] = edid->mfg_id[1];
+	eld[18] = edid->prod_code[0];
+	eld[19] = edid->prod_code[1];
+
+	for (db = cea + 4; db < cea + cea[2]; db += dbl + 1) {
+		dbl = db[0] & 0x1f;
+
+		switch ((db[0] & 0xe0) >> 5) {
+		case AUDIO_BLOCK:	/* Audio Data Block, contains SADs */
+			sad_count = dbl / 3;
+			memcpy(eld + 20 + mnl, &db[1], dbl);
+			break;
+		case SPEAKER_BLOCK:	/* Speaker Allocation Data Block */
+			eld[7] = db[1];
+			break;
+		case VENDOR_BLOCK:
+			/* HDMI Vendor-Specific Data Block */
+			if (db[1] == 0x03 && db[2] == 0x0c && db[3] == 0)
+				parse_hdmi_vsdb(connector, db);
+			break;
+		default:
+			break;
+		}
+	}
+	eld[5] |= sad_count << 4;
+	eld[2] = (20 + mnl + sad_count * 3 + 3) / 4;
+
+	DRM_DEBUG_KMS("ELD size %d, SAD count %d\n", (int)eld[2], sad_count);
+}
+EXPORT_SYMBOL(drm_edid_to_eld);
+
+/**
+ * drm_av_sync_delay - HDMI/DP sink audio-video sync delay in milli-seconds
+ * @connector: connector associated with the HDMI/DP sink
+ * @mode: the display mode
+ */
+int drm_av_sync_delay(struct drm_connector *connector,
+		      struct drm_display_mode *mode)
+{
+	int i = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+	int a, v;
+
+	if (!connector->latency_present[0])
+		return 0;
+	if (!connector->latency_present[1])
+		i = 0;
+
+	a = connector->audio_latency[i];
+	v = connector->video_latency[i];
+
+	/*
+	 * HDMI/DP sink doesn't support audio or video?
+	 */
+	if (a == 255 || v == 255)
+		return 0;
+
+	/*
+	 * Convert raw edid values to milli-seconds.
+	 * Treat unknown latency as 0ms.
+	 */
+	if (a)
+		a = min(2 * (a - 1), 500);
+	if (v)
+		v = min(2 * (v - 1), 500);
+
+	return max(v - a, 0);
+}
+EXPORT_SYMBOL(drm_av_sync_delay);
+
+/**
+ * drm_select_eld - select one ELD from multiple HDMI/DP sinks
+ * @encoder: the encoder just changed display mode
+ * @mode: the adjusted display mode
+ *
+ * It's possible for one encoder to be associated with multiple HDMI/DP sinks.
+ * The policy is now hard coded to simply use the first HDMI/DP sink's ELD.
+ */
+struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode)
+{
+	struct drm_connector *connector;
+	struct drm_device *dev = encoder->dev;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->encoder == encoder && connector->eld[0])
+			return connector;
+
+	return NULL;
+}
+EXPORT_SYMBOL(drm_select_eld);
+
 /**
  * drm_detect_hdmi_monitor - detect whether monitor is hdmi.
  * @edid: monitor EDID information
--- linux-next.orig/drivers/gpu/drm/i915/intel_hdmi.c	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/intel_hdmi.c	2011-09-02 15:59:40.000000000 +0800
@@ -245,8 +245,11 @@ static void intel_hdmi_mode_set(struct d
 		sdvox |= HDMI_MODE_SELECT;
 
 	if (intel_hdmi->has_audio) {
+		DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
+				 pipe_name(intel_crtc->pipe));
 		sdvox |= SDVO_AUDIO_ENABLE;
 		sdvox |= SDVO_NULL_PACKETS_DURING_VSYNC;
+		intel_write_eld(encoder, adjusted_mode);
 	}
 
 	if (intel_crtc->pipe == 1) {
--- linux-next.orig/include/drm/drm_edid.h	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/include/drm/drm_edid.h	2011-09-02 15:59:40.000000000 +0800
@@ -230,4 +230,13 @@ struct edid {
 
 #define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
 
+struct drm_encoder;
+struct drm_connector;
+struct drm_display_mode;
+void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
+int drm_av_sync_delay(struct drm_connector *connector,
+		      struct drm_display_mode *mode);
+struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode);
+
 #endif /* __DRM_EDID_H__ */
--- linux-next.orig/drivers/gpu/drm/i915/intel_display.c	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/intel_display.c	2011-09-02 15:59:40.000000000 +0800
@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/vgaarb.h>
+#include <drm/drm_edid.h>
 #include "drmP.h"
 #include "intel_drv.h"
 #include "i915_drm.h"
@@ -5667,6 +5668,132 @@ static int intel_crtc_mode_set(struct dr
 	return ret;
 }
 
+static void g4x_write_eld(struct drm_connector *connector,
+			  struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t len;
+	uint32_t i;
+
+	i = I915_READ(G4X_AUD_VID_DID);
+
+	if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
+		eldv = G4X_ELDV_DEVCL_DEVBLC;
+	else
+		eldv = G4X_ELDV_DEVCTG;
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i &= ~(eldv | G4X_ELD_ADDR);
+	len = (i >> 9) & 0x1f;		/* ELD buffer size */
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
+
+	if (!eld[0])
+		return;
+
+	len = min_t(uint8_t, eld[2], len);
+	DRM_DEBUG_DRIVER("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i |= eldv;
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
+}
+
+static void ironlake_write_eld(struct drm_connector *connector,
+				     struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t i;
+	int len;
+	int hdmiw_hdmiedid;
+	int aud_cntl_st;
+	int aud_cntrl_st2;
+
+	if (IS_IVYBRIDGE(connector->dev)) {
+		hdmiw_hdmiedid = GEN7_HDMIW_HDMIEDID_A;
+		aud_cntl_st = GEN7_AUD_CNTRL_ST_A;
+		aud_cntrl_st2 = GEN7_AUD_CNTRL_ST2;
+	} else {
+		hdmiw_hdmiedid = GEN6_HDMIW_HDMIEDID_A;
+		aud_cntl_st = GEN6_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = GEN6_AUD_CNTL_ST2;
+	}
+
+	i = to_intel_crtc(crtc)->pipe;
+	hdmiw_hdmiedid += i * 0x100;
+	aud_cntl_st += i * 0x100;
+
+	DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
+
+	i = I915_READ(aud_cntl_st);
+	i = (i >> 29) & 0x3;		/* DIP_Port_Select, 0x1 = PortB */
+	if (!i) {
+		DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
+		/* operate blindly on all ports */
+		eldv = GEN6_ELD_VALIDB;
+		eldv |= GEN6_ELD_VALIDB << 4;
+		eldv |= GEN6_ELD_VALIDB << 8;
+	} else {
+		DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
+		eldv = GEN6_ELD_VALIDB << ((i - 1) * 4);
+	}
+
+	i = I915_READ(aud_cntrl_st2);
+	i &= ~eldv;
+	I915_WRITE(aud_cntrl_st2, i);
+
+	if (!eld[0])
+		return;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+		eld[5] |= (1 << 2);	/* Conn_Type, 0x1 = DisplayPort */
+	}
+
+	i = I915_READ(aud_cntl_st);
+	i &= ~GEN6_ELD_ADDRESS;
+	I915_WRITE(aud_cntl_st, i);
+
+	len = min_t(uint8_t, eld[2], 21);	/* 84 bytes of hw ELD buffer */
+	DRM_DEBUG_DRIVER("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
+
+	i = I915_READ(aud_cntrl_st2);
+	i |= eldv;
+	I915_WRITE(aud_cntrl_st2, i);
+}
+
+void intel_write_eld(struct drm_encoder *encoder,
+		     struct drm_display_mode *mode)
+{
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_connector *connector;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dump_stack();
+	connector = drm_select_eld(encoder, mode);
+	if (!connector)
+		return;
+
+	DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
+			 connector->base.id,
+			 drm_get_connector_name(connector),
+			 connector->encoder->base.id,
+			 drm_get_encoder_name(connector->encoder));
+
+	connector->eld[6] = drm_av_sync_delay(connector, mode) / 2;
+
+	if (dev_priv->display.write_eld)
+		dev_priv->display.write_eld(connector, crtc);
+}
+
 /** Loads the palette/gamma unit for the CRTC with the prepared values */
 void intel_crtc_load_lut(struct drm_crtc *crtc)
 {
@@ -8183,6 +8310,7 @@ static void intel_init_display(struct dr
 			}
 			dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
 			dev_priv->display.init_clock_gating = ironlake_init_clock_gating;
+			dev_priv->display.write_eld = ironlake_write_eld;
 		} else if (IS_GEN6(dev)) {
 			if (SNB_READ_WM0_LATENCY()) {
 				dev_priv->display.update_wm = sandybridge_update_wm;
@@ -8193,6 +8321,7 @@ static void intel_init_display(struct dr
 			}
 			dev_priv->display.fdi_link_train = gen6_fdi_link_train;
 			dev_priv->display.init_clock_gating = gen6_init_clock_gating;
+			dev_priv->display.write_eld = ironlake_write_eld;
 		} else if (IS_IVYBRIDGE(dev)) {
 			/* FIXME: detect B0+ stepping and use auto training */
 			dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
@@ -8204,7 +8333,7 @@ static void intel_init_display(struct dr
 				dev_priv->display.update_wm = NULL;
 			}
 			dev_priv->display.init_clock_gating = ivybridge_init_clock_gating;
-
+			dev_priv->display.write_eld = ironlake_write_eld;
 		} else
 			dev_priv->display.update_wm = NULL;
 	} else if (IS_PINEVIEW(dev)) {
@@ -8224,6 +8353,7 @@ static void intel_init_display(struct dr
 			dev_priv->display.update_wm = pineview_update_wm;
 		dev_priv->display.init_clock_gating = gen3_init_clock_gating;
 	} else if (IS_G4X(dev)) {
+		dev_priv->display.write_eld = g4x_write_eld;
 		dev_priv->display.update_wm = g4x_update_wm;
 		dev_priv->display.init_clock_gating = g4x_init_clock_gating;
 	} else if (IS_GEN4(dev)) {
--- linux-next.orig/drivers/gpu/drm/i915/i915_reg.h	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/i915_reg.h	2011-09-02 15:59:40.000000000 +0800
@@ -3470,4 +3470,29 @@
 #define GEN6_PCODE_DATA				0x138128
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 
+#define G4X_AUD_VID_DID			0x62020
+#define INTEL_AUDIO_DEVCL		0x808629FB
+#define INTEL_AUDIO_DEVBLC		0x80862801
+#define INTEL_AUDIO_DEVCTG		0x80862802
+
+#define G4X_AUD_CNTL_ST			0x620B4
+#define G4X_ELDV_DEVCL_DEVBLC		(1 << 13)
+#define G4X_ELDV_DEVCTG			(1 << 14)
+#define G4X_ELD_ADDR			(0xf << 5)
+#define G4X_ELD_ACK			(1 << 4)
+#define G4X_HDMIW_HDMIEDID		0x6210C
+
+#define GEN6_HDMIW_HDMIEDID_A		0xE2050
+#define GEN6_AUD_CNTL_ST_A		0xE20B4
+#define GEN6_ELD_BUFFER_SIZE		(0x1f << 10)
+#define GEN6_ELD_ADDRESS		(0x1f << 5)
+#define GEN6_ELD_ACK			(1 << 4)
+#define GEN6_AUD_CNTL_ST2		0xE20C0
+#define GEN6_ELD_VALIDB			(1 << 0)
+#define GEN6_CP_READYB			(1 << 1)
+
+#define GEN7_HDMIW_HDMIEDID_A		0xE5050
+#define GEN7_AUD_CNTRL_ST_A		0xE50B4
+#define GEN7_AUD_CNTRL_ST2		0xE50C0
+
 #endif /* _I915_REG_H_ */
--- linux-next.orig/drivers/gpu/drm/i915/intel_drv.h	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/intel_drv.h	2011-09-02 15:59:40.000000000 +0800
@@ -380,4 +380,6 @@ extern void intel_fb_output_poll_changed
 extern void intel_fb_restore_mode(struct drm_device *dev);
 
 extern void intel_init_clock_gating(struct drm_device *dev);
+extern void intel_write_eld(struct drm_encoder *encoder,
+			    struct drm_display_mode *mode);
 #endif /* __INTEL_DRV_H__ */
--- linux-next.orig/drivers/gpu/drm/i915/intel_modes.c	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/intel_modes.c	2011-09-02 15:59:40.000000000 +0800
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/fb.h>
+#include <drm/drm_edid.h>
 #include "drmP.h"
 #include "intel_drv.h"
 #include "i915_drv.h"
@@ -74,6 +75,7 @@ int intel_ddc_get_modes(struct drm_conne
 	if (edid) {
 		drm_mode_connector_update_edid_property(connector, edid);
 		ret = drm_add_edid_modes(connector, edid);
+		drm_edid_to_eld(connector, edid);
 		connector->display_info.raw_edid = NULL;
 		kfree(edid);
 	}
--- linux-next.orig/include/drm/drm_crtc.h	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/include/drm/drm_crtc.h	2011-09-02 15:59:40.000000000 +0800
@@ -466,6 +466,8 @@ enum drm_connector_force {
 /* DACs should rarely do this without a lot of testing */
 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
 
+#define MAX_ELD_BYTES	128
+
 /**
  * drm_connector - central DRM connector control structure
  * @crtc: CRTC this connector is currently connected to, NULL if none
@@ -523,6 +525,13 @@ struct drm_connector {
 	uint32_t force_encoder_id;
 	struct drm_encoder *encoder; /* currently active encoder */
 
+	/* EDID bits */
+	uint8_t eld[MAX_ELD_BYTES];
+	bool dvi_dual;
+	int max_tmds_clock;	/* in MHz */
+	bool latency_present[2];
+	int video_latency[2];	/* [0]: progressive, [1]: interlaced */
+	int audio_latency[2];
 	int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
 };
 
--- linux-next.orig/drivers/gpu/drm/i915/intel_dp.c	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/intel_dp.c	2011-09-02 15:59:40.000000000 +0800
@@ -773,8 +773,12 @@ intel_dp_mode_set(struct drm_encoder *en
 		intel_dp->DP |= DP_PORT_WIDTH_4;
 		break;
 	}
-	if (intel_dp->has_audio)
+	if (intel_dp->has_audio) {
+		DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
+				 pipe_name(intel_crtc->pipe));
 		intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
+		intel_write_eld(encoder, adjusted_mode);
+	}
 
 	memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE);
 	intel_dp->link_configuration[0] = intel_dp->link_bw;
--- linux-next.orig/drivers/gpu/drm/i915/i915_drv.h	2011-09-02 15:59:31.000000000 +0800
+++ linux-next/drivers/gpu/drm/i915/i915_drv.h	2011-09-02 15:59:40.000000000 +0800
@@ -209,6 +209,8 @@ struct drm_i915_display_funcs {
 			     struct drm_display_mode *adjusted_mode,
 			     int x, int y,
 			     struct drm_framebuffer *old_fb);
+	void (*write_eld)(struct drm_connector *connector,
+			  struct drm_crtc *crtc);
 	void (*fdi_link_train)(struct drm_crtc *crtc);
 	void (*init_clock_gating)(struct drm_device *dev);
 	void (*init_pch_clock_gating)(struct drm_device *dev);

             reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-02  8:14 Wu Fengguang [this message]
2011-09-02  8:29 ` Wu Fengguang
2011-09-03 21:15 ` [PATCH v5] " Wu Fengguang
2011-09-04 10:57   ` James Cloos
2011-09-05  1:19     ` Wu Fengguang
2011-09-04 11:11   ` [Intel-gfx] " Paul Menzel
2011-09-05  1:06     ` Wu Fengguang
2011-09-04 12:08   ` Chris Wilson
2011-09-05  1:14     ` Wu Fengguang
2011-09-05 11:04       ` Chris Wilson
2011-09-05 12:31         ` Wu Fengguang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110902081428.GA19621@localhost \
    --to=fengguang.wu@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bskeggs@redhat.com \
    --cc=c.white@pulseforce.com \
    --cc=contractfrombelow@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=keithp@keithp.com \
    --cc=michael.fu@intel.com \
    --cc=pierre-louis.bossart@intel.com \
    --cc=zhenyu.z.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git