From: Stefan Richter <stefanr@s5r6.in-berlin.de>
To: Jonathan Woithe <jwoithe@just42.net>
Cc: tiwai@suse.de, alsa-devel@alsa-project.org,
ffado-devel@lists.sf.net,
Takashi Sakamoto <o-takashi@sakamocchi.jp>
Subject: Re: [FFADO-devel] [PATCH 18/39] firewire-lib: Add a fallback at RCODE_CANCELLED
Date: Tue, 4 Mar 2014 09:33:23 +0100 [thread overview]
Message-ID: <20140304093323.31b314d1@stein> (raw)
In-Reply-To: <20140304013535.GP15773@marvin.atrad.com.au>
On Mar 04 Jonathan Woithe wrote:
> On Sat, Mar 01, 2014 at 03:20:50PM +0100, Stefan Richter wrote:
> > >> Since FFADO applies 200 ms or more as FCP
> > >> transaction timeout, shouldn't firewire-lib's fcp.c increase
> > >> FCP_TIMEOUT_MS from 125 to 200 or more as well?
[...]
> I've personally had nothing to do with devices utilising FCP transactions so
> unfortunately I don't really know. My feeling is that the authors of the
> respective FFADO drivers would not have applied an FCP timeout of 200 ms if
> there was no demonstrated need for it. Therefore in the absence of other
> evidence I would be assuming that there are devices which require the higher
> timeout allowed for in FFADO's streaming code. However, I don't know which
> specific devices these might be.
./libffado/config.h.in:
#define IEEE1394SERVICE_FCP_RESPONSE_TIMEOUT_USEC 200000
was added in this FFADO revision:
http://subversion.ffado.org/changeset/1371
Timestamp:
10/23/08 09:00:47 (5 years ago)
Author:
ppalmers
Message:
* implement our own code to do FCP transactions. the code from libavc
had too much side-effects.
* remove libavc1394 as a dependency
* set the SPLIT_TIMEOUT value for the host controller such that late
responses by the DM1x00 based devices are not discarded. Should fix
the issues with FA-101 discovery. (re: #155, #162)
I will look through the libavc1394 source history.
--
Stefan Richter
-=====-====- --== --=--
http://arcgraph.de/sr/
next prev parent reply other threads:[~2014-03-04 8:33 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 3:27 [GIT PULL][PATCH 00/39] Enhancement of support for Firewire devices Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 01/39] firewire-lib: Rename functions, structure, member for AMDTP Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 02/39] firewire-lib: Add macros instead of fixed value " Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 03/39] firewire-lib: Add 'direction' member to 'amdtp_stream' structure Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 04/39] firewire-lib: Split some codes into functions to reuse for both streams Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 05/39] firewire-lib: Add support for AMDTP in-stream and PCM capture Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 06/39] firewire-lib: Add support for MIDI capture/playback Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 07/39] firewire-lib: Give syt value as parameter to handle_out_packet() Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 08/39] firewire-lib: Add support for duplex streams synchronization in blocking mode Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 09/39] firewire-lib: Add sort function for transmitted packet Takashi Sakamoto
2014-02-28 6:40 ` Takashi Iwai
2014-02-28 14:31 ` Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 10/39] firewire-lib: Add transfer delay to synchronized duplex streams Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 11/39] firewire-lib: Add support for channel mapping Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 12/39] firewire-lib: Rename macros, variables and functions for CMP Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 13/39] firewire-lib: Add 'direction' member to 'cmp_connection' structure Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 14/39] firewire-lib: Add handling output connection by CMP Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 15/39] firewire-lib: Add a new function to check others' connection Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 16/39] firewire-lib: Add some AV/C general commands Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 17/39] firewire-lib: Add quirks for Fireworks Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 18/39] firewire-lib: Add a fallback at RCODE_CANCELLED Takashi Sakamoto
2014-02-28 20:25 ` Stefan Richter
2014-02-28 20:39 ` Stefan Richter
2014-03-01 3:18 ` Takashi Sakamoto
2014-03-01 10:10 ` Stefan Richter
2014-03-01 12:22 ` Takashi Sakamoto
2014-03-01 14:20 ` Stefan Richter
2014-03-04 1:35 ` [FFADO-devel] " Jonathan Woithe
2014-03-04 8:33 ` Stefan Richter [this message]
2014-03-04 9:28 ` Stefan Richter
2014-03-01 10:34 ` Stefan Richter
2014-03-01 12:23 ` Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 19/39] fireworks: Add skelton for Fireworks based devices Takashi Sakamoto
2014-02-28 6:51 ` Takashi Iwai
2014-02-28 15:05 ` Takashi Sakamoto
2014-02-28 15:10 ` Takashi Iwai
2014-02-28 15:36 ` Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 20/39] fireworks: Add transaction and some commands Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 21/39] fireworks: Add connection and stream management Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 22/39] fireworks: Add proc interface for debugging purpose Takashi Sakamoto
2014-02-28 6:54 ` Takashi Iwai
2014-03-01 13:17 ` Takashi Sakamoto
2014-03-03 9:01 ` Takashi Iwai
2014-03-04 14:10 ` Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 23/39] fireworks: Add MIDI interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 24/39] fireworks: Add PCM interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 25/39] fireworks: Add hwdep interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 26/39] fireworks: Add command/response functionality into " Takashi Sakamoto
2014-02-28 6:58 ` Takashi Iwai
2014-03-01 13:18 ` Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 27/39] bebob: Add skelton for BeBoB based devices Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 28/39] bebob: Add commands and connections/streams management Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 29/39] bebob: Add proc interface for debugging purpose Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 30/39] bebob: Add MIDI interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 31/39] bebob: Add PCM interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 32/39] bebob: Add hwdep interface Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 33/39] bebob: Prepare for device specific operations Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 34/39] bebob: Add support for Terratec PHASE, EWS series and Aureon Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 35/39] bebob: Add support for Yamaha GO series Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 36/39] bebob: Add support for Focusrite Saffire/SaffirePro series Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 37/39] bebob: Add support for M-Audio usual Firewire series Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 38/39] bebob: Send a cue to load firmware for M-Audio " Takashi Sakamoto
2014-02-28 3:27 ` [PATCH 39/39] bebob: Add support for M-Audio special " Takashi Sakamoto
2014-03-01 10:53 ` Stefan Richter
2014-03-01 13:06 ` Takashi Sakamoto
2014-03-01 14:32 ` Stefan Richter
2014-02-28 6:36 ` [GIT PULL][PATCH 00/39] Enhancement of support for Firewire devices Takashi Iwai
2014-03-01 13:14 ` Takashi Sakamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140304093323.31b314d1@stein \
--to=stefanr@s5r6.in-berlin.de \
--cc=alsa-devel@alsa-project.org \
--cc=ffado-devel@lists.sf.net \
--cc=jwoithe@just42.net \
--cc=o-takashi@sakamocchi.jp \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).