From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
Jerome Anand <jerome.anand@intel.com>
Subject: [PATCH 44/53] ALSA: x86: Implement runtime PM
Date: Thu, 2 Feb 2017 18:02:58 +0100 [thread overview]
Message-ID: <20170202170307.24484-46-tiwai@suse.de> (raw)
In-Reply-To: <20170202170307.24484-1-tiwai@suse.de>
Although the driver has some PM callbacks, it doesn't do it right:
- the suspend callback doesn't handle to suspend the running PCM,
- the runtime PM ops are missing,
- pm_runtime_get_sync() isn't used at the right place.
This patch covers the above and provides the basic runtime PM
functionality.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/x86/intel_hdmi_audio.c | 127 +++++++++++++++++--------------------------
1 file changed, 50 insertions(+), 77 deletions(-)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
index c209d9498c0e..04ff7f14fe12 100644
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -975,7 +975,7 @@ static int snd_intelhad_open(struct snd_pcm_substream *substream)
runtime = substream->runtime;
intelhaddata->underrun_count = 0;
- pm_runtime_get(intelhaddata->dev);
+ pm_runtime_get_sync(intelhaddata->dev);
if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
dev_dbg(intelhaddata->dev, "%s: HDMI cable plugged-out\n",
@@ -1129,6 +1129,8 @@ static int snd_intelhad_pcm_trigger(struct snd_pcm_substream *substream,
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
/* Disable local INTRs till register prgmng is done */
if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
dev_dbg(intelhaddata->dev,
@@ -1145,6 +1147,8 @@ static int snd_intelhad_pcm_trigger(struct snd_pcm_substream *substream,
break;
case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
spin_lock(&intelhaddata->had_spinlock);
intelhaddata->curr_buf = 0;
@@ -1354,80 +1358,6 @@ static int hdmi_audio_mode_change(struct snd_intelhad *intelhaddata)
return retval;
}
-/*
- * hdmi_lpe_audio_suspend - power management suspend function
- * @pdev: platform device
- *
- * This function is called to suspend the hdmi audio.
- */
-static int hdmi_lpe_audio_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- struct had_stream_data *had_stream;
- struct snd_intelhad *intelhaddata = platform_get_drvdata(pdev);
-
- had_stream = &intelhaddata->stream_data;
-
- if (!pm_runtime_status_suspended(intelhaddata->dev)) {
- dev_err(intelhaddata->dev, "audio stream is active\n");
- return -EAGAIN;
- }
-
- spin_lock_irq(&intelhaddata->had_spinlock);
- if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
- spin_unlock_irq(&intelhaddata->had_spinlock);
- dev_dbg(intelhaddata->dev, "had not connected\n");
- return 0;
- }
-
- if (intelhaddata->drv_status == HAD_DRV_SUSPENDED) {
- spin_unlock_irq(&intelhaddata->had_spinlock);
- dev_dbg(intelhaddata->dev, "had already suspended\n");
- return 0;
- }
-
- intelhaddata->drv_status = HAD_DRV_SUSPENDED;
- dev_dbg(intelhaddata->dev,
- "%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_SUSPENDED\n",
- __func__, __LINE__);
-
- spin_unlock_irq(&intelhaddata->had_spinlock);
- snd_intelhad_enable_audio_int(intelhaddata, false);
- return 0;
-}
-
-/*
- * hdmi_lpe_audio_resume - power management resume function
- * @pdev: platform device
- *
- * This function is called to resume the hdmi audio.
- */
-static int hdmi_lpe_audio_resume(struct platform_device *pdev)
-{
- struct snd_intelhad *intelhaddata = platform_get_drvdata(pdev);
-
- spin_lock_irq(&intelhaddata->had_spinlock);
- if (intelhaddata->drv_status == HAD_DRV_DISCONNECTED) {
- spin_unlock_irq(&intelhaddata->had_spinlock);
- dev_dbg(intelhaddata->dev, "had not connected\n");
- return 0;
- }
-
- if (intelhaddata->drv_status != HAD_DRV_SUSPENDED) {
- spin_unlock_irq(&intelhaddata->had_spinlock);
- dev_dbg(intelhaddata->dev, "had is not in suspended state\n");
- return 0;
- }
-
- intelhaddata->drv_status = HAD_DRV_CONNECTED;
- dev_dbg(intelhaddata->dev,
- "%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_DISCONNECTED\n",
- __func__, __LINE__);
- spin_unlock_irq(&intelhaddata->had_spinlock);
- snd_intelhad_enable_audio_int(intelhaddata, true);
- return 0;
-}
-
static inline int had_chk_intrmiss(struct snd_intelhad *intelhaddata,
enum intel_had_aud_buf_type buf_id)
{
@@ -1808,6 +1738,7 @@ static void had_audio_wq(struct work_struct *work)
container_of(work, struct snd_intelhad, hdmi_audio_wq);
struct intel_hdmi_lpe_audio_pdata *pdata = ctx->dev->platform_data;
+ pm_runtime_get_sync(ctx->dev);
mutex_lock(&ctx->mutex);
if (!pdata->hdmi_connected) {
dev_dbg(ctx->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG\n",
@@ -1848,6 +1779,44 @@ static void had_audio_wq(struct work_struct *work)
hdmi_audio_mode_change(ctx);
}
mutex_unlock(&ctx->mutex);
+ pm_runtime_put(ctx->dev);
+}
+
+/*
+ * PM callbacks
+ */
+
+static int hdmi_lpe_audio_runtime_suspend(struct device *dev)
+{
+ struct snd_intelhad *ctx = dev_get_drvdata(dev);
+ struct snd_pcm_substream *substream;
+
+ substream = had_substream_get(ctx);
+ if (substream) {
+ snd_pcm_suspend(substream);
+ had_substream_put(ctx);
+ }
+
+ return 0;
+}
+
+static int hdmi_lpe_audio_suspend(struct device *dev)
+{
+ struct snd_intelhad *ctx = dev_get_drvdata(dev);
+ int err;
+
+ err = hdmi_lpe_audio_runtime_suspend(dev);
+ if (!err)
+ snd_power_change_state(ctx->card, SNDRV_CTL_POWER_D3hot);
+ return err;
+}
+
+static int hdmi_lpe_audio_resume(struct device *dev)
+{
+ struct snd_intelhad *ctx = dev_get_drvdata(dev);
+
+ snd_power_change_state(ctx->card, SNDRV_CTL_POWER_D0);
+ return 0;
}
/* release resources */
@@ -2021,14 +1990,18 @@ static int hdmi_lpe_audio_remove(struct platform_device *pdev)
return 0;
}
+static const struct dev_pm_ops hdmi_lpe_audio_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(hdmi_lpe_audio_suspend, hdmi_lpe_audio_resume)
+ SET_RUNTIME_PM_OPS(hdmi_lpe_audio_runtime_suspend, NULL, NULL)
+};
+
static struct platform_driver hdmi_lpe_audio_driver = {
.driver = {
.name = "hdmi-lpe-audio",
+ .pm = &hdmi_lpe_audio_pm,
},
.probe = hdmi_lpe_audio_probe,
.remove = hdmi_lpe_audio_remove,
- .suspend = hdmi_lpe_audio_suspend,
- .resume = hdmi_lpe_audio_resume
};
module_platform_driver(hdmi_lpe_audio_driver);
--
2.11.0
next prev parent reply other threads:[~2017-02-02 17:03 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 17:02 [PATCH 00/53] Intel LPE audio driver cleanups Takashi Iwai
2017-02-02 17:02 ` [PATCH 01/53] ALSA: x86: Don't set PCM state to DISCONNECTED Takashi Iwai
2017-02-02 17:02 ` [PATCH] drm/i915: Enable VLV audio chicken bit for LPE audio Takashi Iwai
2017-02-02 17:07 ` Takashi Iwai
2017-02-02 17:02 ` [PATCH 02/53] ALSA: x86: Remove v1 ops and structs Takashi Iwai
2017-02-02 17:02 ` [PATCH 03/53] ALSA: x86: Drop indirect calls of had_ops Takashi Iwai
2017-02-02 17:02 ` [PATCH 04/53] ALSA: x86: Replace indirect register ops with direct calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 05/53] ALSA: x86: Replace indirect query_ops " Takashi Iwai
2017-02-02 17:02 ` [PATCH 06/53] ALSA: x86: Drop snd_intel_had_interface indirect calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 07/53] ALSA: x86: Pass snd_intelhad object to helpers Takashi Iwai
2017-02-02 17:02 ` [PATCH 08/53] ALSA: x86: Handle the error from hdmi_audio_probe() properly Takashi Iwai
2017-02-02 17:02 ` [PATCH 09/53] ALSA: x86: Drop useless mutex at probe Takashi Iwai
2017-02-02 17:02 ` [PATCH 10/53] ALSA: x86: Call event callback directly Takashi Iwai
2017-02-02 17:02 ` [PATCH 11/53] ALSA: x86: Fix possible stale interrupt calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 12/53] ALSA: x86: Drop unused mid_hdmi_audio_is_busy() Takashi Iwai
2017-02-02 17:02 ` [PATCH 13/53] ALSA: x86: Drop the global platform device reference Takashi Iwai
2017-02-02 17:02 ` [PATCH 14/53] ALSA: x86: Drop global hlpe_state Takashi Iwai
2017-02-02 17:02 ` [PATCH 15/53] ALSA: x86: Drop global ELD copy Takashi Iwai
2017-02-02 17:02 ` [PATCH 16/53] ALSA: x86: Move the global underrun_count to struct snd_intelhad Takashi Iwai
2017-02-02 17:02 ` [PATCH 17/53] ALSA: x86: Drop unused hw_silence field Takashi Iwai
2017-02-02 19:11 ` Pierre-Louis Bossart
2017-02-02 20:04 ` Takashi Iwai
2017-02-02 20:26 ` Pierre-Louis Bossart
2017-02-03 4:25 ` Ughreja, Rakesh A
2017-02-02 17:02 ` [PATCH 18/53] ALSA: x86: Move dma_mask debug print into intel_hdmi_lpe_audio.c Takashi Iwai
2017-02-02 17:02 ` [PATCH 19/53] ALSA: x86: Embed snd_intelhad into snd_card Takashi Iwai
2017-02-02 17:02 ` [PATCH 20/53] ALSA: x86: Drop superfluous CHT PCI ID check Takashi Iwai
2017-02-02 17:02 ` [PATCH 21/53] ALSA: x86: Check platform_data earlier Takashi Iwai
2017-02-02 17:02 ` [PATCH 22/53] ALSA: x86: Call snd_card_register() at the end Takashi Iwai
2017-02-02 17:02 ` [PATCH 23/53] ALSA: x86: Drop unused hdmi_audio_query() Takashi Iwai
2017-02-02 17:02 ` [PATCH 24/53] ALSA: x86: Flatten two abstraction layers Takashi Iwai
2017-02-02 17:02 ` [PATCH 25/53] ALSA: x86: Fold intel_hdmi_audio_if.c into main file Takashi Iwai
2017-02-02 17:02 ` [PATCH 26/53] ALSA: x86: Replace pr_xxx() with dev_xxx() Takashi Iwai
2017-02-02 17:02 ` [PATCH 27/53] ALSA: x86: Fix for CONFIG_PM=n Takashi Iwai
2017-02-02 17:02 ` [PATCH 28/53] ALSA: x86: Remove indirect call of snd_pcm_period_elapsed() Takashi Iwai
2017-02-02 17:02 ` [PATCH 29/53] ALSA: x86: Drop unused fields from snd_intelhad struct Takashi Iwai
2017-02-02 17:02 ` [PATCH 30/53] ALSA: x86: Drop superfluous PCM private_free Takashi Iwai
2017-02-02 17:02 ` [PATCH 31/53] ALSA: x86: Fix sleep-in-atomic via i915 notification Takashi Iwai
2017-02-02 17:02 ` [PATCH 32/53] ALSA: x86: Remove superfluous check at resume Takashi Iwai
2017-02-02 17:02 ` [PATCH 33/53] ALSA: x86: Drop had_get_hwstate() Takashi Iwai
2017-02-02 17:02 ` [PATCH 34/53] ALSA: x86: Tidy up codes Takashi Iwai
2017-02-02 17:02 ` [PATCH 35/53] ALSA: x86: Remove _v[12] suffices Takashi Iwai
2017-02-02 17:02 ` [PATCH 36/53] ALSA: x86: Constfy tables Takashi Iwai
2017-02-02 17:02 ` [PATCH 37/53] ALSA: x86: Remove superfluous irqsave flags Takashi Iwai
2017-02-02 17:02 ` [PATCH 38/53] ALSA: x86: Fix racy access to chmap Takashi Iwai
2017-02-02 17:02 ` [PATCH 39/53] ALSA: x86: Drop flag_underrun field Takashi Iwai
2017-02-02 17:02 ` [PATCH 40/53] ALSA: x86: Drop superfluous state field Takashi Iwai
2017-02-02 17:02 ` [PATCH 41/53] ALSA: x86: Drop redundant had_stream_pvt Takashi Iwai
2017-02-02 17:02 ` [PATCH 42/53] ALSA: x86: Drop unused fields from pcm_stream_info Takashi Iwai
2017-02-02 17:02 ` [PATCH 43/53] ALSA: x86: Properly manage PCM substream lifetype Takashi Iwai
2017-02-02 17:02 ` Takashi Iwai [this message]
2017-02-02 17:02 ` [PATCH 45/53] ALSA: x86: Move stream status into pcm_stream_info Takashi Iwai
2017-02-02 17:03 ` [PATCH 46/53] ALSA: x86: Use the standard ELD bytes definitions Takashi Iwai
2017-02-02 17:03 ` [PATCH 47/53] ALSA: x86: Reduce redundant register field names Takashi Iwai
2017-02-02 17:03 ` [PATCH 48/53] ALSA: x86: Clean up unused defines and inclusions Takashi Iwai
2017-02-02 17:03 ` [PATCH 49/53] ALSA: x86: Create ELD control element Takashi Iwai
2017-02-02 17:03 ` [PATCH 50/53] ALSA: x86: Set CA bits for DisplayPort too Takashi Iwai
2017-02-02 17:03 ` [PATCH 51/53] ALSA: x86: Simplify comments Takashi Iwai
2017-02-02 17:03 ` [PATCH 52/53] ALSA: x86: Yet more tidy-up and clean-ups Takashi Iwai
2017-02-02 17:03 ` [PATCH 53/53] ALSA: x86: Rename drv_status to connected Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170202170307.24484-46-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=jerome.anand@intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).