From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, intel-gfx@lists.freedesktop.org,
rakesh.a.ughreja@intel.com
Subject: Re: [PATCH] drm/i915: Enable VLV audio chicken bit for LPE audio
Date: Fri, 3 Feb 2017 16:54:33 +0200 [thread overview]
Message-ID: <20170203145433.GK31595@intel.com> (raw)
In-Reply-To: <s5h8tpn8kne.wl-tiwai@suse.de>
On Fri, Feb 03, 2017 at 02:32:37PM +0100, Takashi Iwai wrote:
> On Thu, 02 Feb 2017 11:12:53 +0100,
> Takashi Iwai wrote:
> >
> > The audio chicken bit (register offset 0x62f38) seems required to make
> > DP audio working on some machines. At least, on Dell Wyse 3040, I
> > failed to get the audio unless this bit is set once.
> >
> > Strangely, the bit seems necessary only once, and it persists after
> > that, even some power-off cycles. The register is supposedly
> > write-only, so it's no evidence whether the bit keeps effect
> > persistently. But, judging from the experiment, it looks enough to
> > set it up once at the device initialization.
> >
> > The patch is basically a cut from the original patch by Pierre-Louis
> > Bossart.
> >
> > Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> > Signed-off-by: Takashi Iwai <tiwai@suse.de>
>
> I gave a typo to intel-gfx ML address, now corrected, sorry.
>
> Are you i915 guys OK with this change? I'd love to fix it for 4.11 in
> time, so please check and give ACK.
>
>
> thanks,
>
> Takashi
>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 3 +++
> > drivers/gpu/drm/i915/intel_lpe_audio.c | 7 +++++++
> > 2 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 4e24ba0cdbe8..4f15a3dc6d98 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2062,6 +2062,9 @@ enum skl_disp_power_wells {
> > #define I915_HDMI_LPE_AUDIO_SIZE 0x1000
> >
> > /* DisplayPort Audio w/ LPE */
> > +#define VLV_AUD_CHICKEN_BIT_REG _MMIO(VLV_DISPLAY_BASE + 0x62F38)
> > +#define VLV_CHICKEN_BIT_DBG_ENABLE (1 << 0)
> > +
> > #define _VLV_AUD_PORT_EN_B_DBG (VLV_DISPLAY_BASE + 0x62F20)
> > #define _VLV_AUD_PORT_EN_C_DBG (VLV_DISPLAY_BASE + 0x62F30)
> > #define _VLV_AUD_PORT_EN_D_DBG (VLV_DISPLAY_BASE + 0x62F34)
> > diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > index d3ffe0012692..3ba2799e93bd 100644
> > --- a/drivers/gpu/drm/i915/intel_lpe_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > @@ -248,6 +248,13 @@ static int lpe_audio_setup(struct drm_i915_private *dev_priv)
> > goto err_free_irq;
> > }
> >
> > + /* enable chicken bit; at least this is required for Dell Wyse 3040
> > + * with DP outputs (but only sometimes by some reason!)
> > + */
> > + I915_WRITE(VLV_AUD_CHICKEN_BIT_REG,
> > + I915_READ(VLV_AUD_CHICKEN_BIT_REG) |
> > + VLV_CHICKEN_BIT_DBG_ENABLE);
RMW seems a little pointless since you verified that the register can't
actually be read.
So, with the read dropped
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > +
> > return 0;
> > err_free_irq:
> > irq_free_desc(dev_priv->lpe_audio.irq);
> > --
> > 2.11.0
> >
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-02-03 14:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 10:12 [PATCH] drm/i915: Enable VLV audio chicken bit for LPE audio Takashi Iwai
2017-02-03 13:32 ` Takashi Iwai
2017-02-03 14:54 ` Ville Syrjälä [this message]
2017-02-03 15:18 ` Takashi Iwai
2017-02-02 17:02 [PATCH 00/53] Intel LPE audio driver cleanups Takashi Iwai
2017-02-02 17:02 ` [PATCH] drm/i915: Enable VLV audio chicken bit for LPE audio Takashi Iwai
2017-02-02 17:07 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170203145433.GK31595@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rakesh.a.ughreja@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).