Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Curtis Malainey <cujomalainey@chromium.org>
To: alsa-devel@alsa-project.org
Cc: Oder Chiou <oder_chiou@realtek.com>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Bard Liao <bardliao@realtek.com>,
	Curtis Malainey <cujomalainey@chromium.org>
Subject: [alsa-devel] [PATCH v3 11/11] ASoC: rt5677: Wait for DSP to boot before loading firmware
Date: Tue,  5 Nov 2019 17:13:36 -0800
Message-ID: <20191106011335.223061-12-cujomalainey@chromium.org> (raw)
In-Reply-To: <20191106011335.223061-1-cujomalainey@chromium.org>

Wait for hardware to startup. If we load before hardware is ready we
could end up corrupting the firmware.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
---
 sound/soc/codecs/rt5677.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 0e7773584145..f2f763b4c399 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -892,6 +892,7 @@ static void rt5677_dsp_work(struct work_struct *work)
 		container_of(work, struct rt5677_priv, dsp_work.work);
 	static bool activity;
 	bool enable = rt5677->dsp_vad_en;
+	int i, val;
 
 
 	dev_info(rt5677->component->dev, "DSP VAD: enable=%d, activity=%d\n",
@@ -913,6 +914,18 @@ static void rt5677_dsp_work(struct work_struct *work)
 		rt5677_set_vad_source(rt5677);
 		rt5677_set_dsp_mode(rt5677, true);
 
+#define RT5677_BOOT_RETRY 20
+		for (i = 0; i < RT5677_BOOT_RETRY; i++) {
+			regmap_read(rt5677->regmap, RT5677_PWR_DSP_ST, &val);
+			if (val == 0x3ff)
+				break;
+			udelay(500);
+		}
+		if (i == RT5677_BOOT_RETRY && val != 0x3ff) {
+			dev_err(rt5677->component->dev, "DSP Boot Timed Out!");
+			return;
+		}
+
 		/* Boot the firmware from IRAM instead of SRAM0. */
 		rt5677_dsp_mode_i2c_write_addr(rt5677, RT5677_DSP_BOOT_VECTOR,
 			0x0009, 0x0003);
-- 
2.24.0.rc1.363.gb1bccd3e3d-goog

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

      parent reply index

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06  1:13 [alsa-devel] [PATCH v3 00/11] Add Samus Hotwording for RT5677 Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 01/11] ASoC: rt5677: Load firmware via SPI using delayed work Curtis Malainey
2019-11-06  1:17   ` Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 02/11] ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 03/11] ASoC: rt5677: Enable jack detect while DSP is running Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 04/11] ASoC: rt5677: Add DAPM audio path for hotword stream Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 05/11] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 06/11] ASoC: rt5677: Stop and restart DSP over suspend/resume Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 07/11] ASoC: rt5677: Disable irq at suspend Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 08/11] ASoC: rt5677: Allow VAD to be shut on/off at all times Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 09/11] ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPM Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 10/11] ASoC: rt5677: Set ADC clock to use PLL and enable ASRC Curtis Malainey
2019-11-06  1:13 ` Curtis Malainey [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106011335.223061-12-cujomalainey@chromium.org \
    --to=cujomalainey@chromium.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git