alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Support Opensource <support.opensource@diasemi.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, Takashi Iwai <tiwai@suse.com>,
	linux-kernel@vger.kernel.org,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	kernel@collabora.com
Subject: [alsa-devel] [PATCHv2 0/6] ASoC: da7213: support for usage with simple-card
Date: Wed, 20 Nov 2019 16:24:00 +0100	[thread overview]
Message-ID: <20191120152406.2744-1-sebastian.reichel@collabora.com> (raw)

Hi,

This extends the da7213 driver to be used with simple-audio-card in
combination with a fixed clock. Here is a snippet of the downstream
board's DT, that is supposed to be supported by this patchset.

---------------------------------------------------------------------
/ {
	sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,bitclock-master = <&dailink_master>;
		simple-audio-card,frame-master = <&dailink_master>;

		simple-audio-card,widgets = "Speaker", "Ext Spk";
		simple-audio-card,audio-routing = "Ext Spk", "LINE";

		simple-audio-card,cpu {
			sound-dai = <&ssi1>;
		};

		dailink_master: simple-audio-card,codec {
			sound-dai = <&codec>;
		};
	};


	clk_ext_audio_codec: clock-codec {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <12288000>;
	};
};

&i2c1 {
	codec: audio-codec@1a {
		compatible = "dlg,da7212";
		reg = <0x1a>;
		#sound-dai-cells = <0>;
		VDDA-supply = <&reg_2v5_audio>;
		VDDSP-supply = <&reg_5v0_audio>;
		VDDMIC-supply = <&reg_3v3_audio>;
		VDDIO-supply = <&reg_3v3_audio>;
		clocks = <&clk_ext_audio_codec>;
		clock-names = "mclk";
	};
};
---------------------------------------------------------------------

Changes since PATCHv1:
 * https://lore.kernel.org/alsa-devel/20191108174843.11227-1-sebastian.reichel@collabora.com/
 * add patch adding da7212 compatible to DT bindings
 * update regulator patch, so that VDDA is enabled together with VDDIO
   while the device is enabled to avoid device reset
 * update clock patch, so that automatic PLL handling is not enabled
   when PLL is configured manually
 * update clock patch, so that automatic PLL is disabled when the device
   is suspended
 * update clock patch, so that automatic PLL is configured into bypass
   mode when possible

-- Sebastian

Sebastian Reichel (6):
  ASoC: da7213: Add da7212 DT compatible
  ASoC: da7213: Add regulator support
  ASoC: da7213: Provide selectable option
  ASoC: da7213: Move set_sysclk to codec level
  ASoC: da7213: Move set_pll to codec level
  ASoC: da7213: Add default clock handling

 .../devicetree/bindings/sound/da7213.txt      |   8 +-
 sound/soc/codecs/Kconfig                      |   3 +-
 sound/soc/codecs/da7213.c                     | 171 ++++++++++++++++--
 sound/soc/codecs/da7213.h                     |  11 ++
 4 files changed, 177 insertions(+), 16 deletions(-)

-- 
2.24.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2019-11-20 15:25 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-20 15:24 Sebastian Reichel [this message]
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 1/6] ASoC: da7213: Add da7212 DT compatible Sebastian Reichel
2019-11-21 20:10   ` Adam Thomson
2019-11-22 17:20     ` Sebastian Reichel
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 2/6] ASoC: da7213: Add regulator support Sebastian Reichel
2019-11-21 21:15   ` Adam Thomson
2019-11-22 17:09     ` Sebastian Reichel
2019-11-26 17:02       ` Adam Thomson
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 3/6] ASoC: da7213: Provide selectable option Sebastian Reichel
2019-11-26 17:05   ` Adam Thomson
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 4/6] ASoC: da7213: Move set_sysclk to codec level Sebastian Reichel
2019-11-26 17:09   ` Adam Thomson
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 5/6] ASoC: da7213: Move set_pll " Sebastian Reichel
2019-11-26 17:10   ` Adam Thomson
2019-11-20 15:24 ` [alsa-devel] [PATCHv2 6/6] ASoC: da7213: Add default clock handling Sebastian Reichel
2019-11-21 21:49   ` Adam Thomson
2019-11-26 16:55     ` Adam Thomson
2019-11-26 17:08       ` Mark Brown
2019-11-26 17:39         ` Adam Thomson
2019-11-26 17:50           ` Mark Brown
2019-11-27 11:32             ` Adam Thomson
2019-11-27 12:33               ` Mark Brown
2019-11-27 13:42                 ` Adam Thomson
2019-11-27 15:40                   ` Mark Brown
2019-11-27 16:33                     ` Adam Thomson
2019-11-27 16:41                       ` Mark Brown
2019-11-27 18:10                         ` Adam Thomson
2019-11-28 13:13                           ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191120152406.2744-1-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kernel@collabora.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=support.opensource@diasemi.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).