[alsa-devel] [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[alsa-devel] [PATCH AUTOSEL 4.9 043/251] ASoC: imx-sgtl5000: put of nodes if finding codec fails

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit d9866572486802bc598a3e8576a5231378d190de ]

Make sure to properly put the of node in case finding the codec
fails.

Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/imx-sgtl5000.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index 8e525f7ac08d..3d99a8579c99 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -119,7 +119,8 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
 	codec_dev = of_find_i2c_device_by_node(codec_np);
 	if (!codec_dev) {
 		dev_err(&pdev->dev, "failed to find codec platform device\n");
-		return -EPROBE_DEFER;
+		ret = -EPROBE_DEFER;
+		goto fail;
 	}
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 082/251] ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the
loop of for_each_child_of_node() in the error path.  Not only the
iterator node of for_each_child_of_node(), the children nodes referred
from it for codec and cpu have to be properly unreferenced.

Fixes: bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc: Patrick Lai <plai@codeaurora.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/apq8016_sbc.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c
index 07f91e918b23..754742018515 100644
--- a/sound/soc/qcom/apq8016_sbc.c
+++ b/sound/soc/qcom/apq8016_sbc.c
@@ -114,13 +114,15 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 
 		if (!cpu || !codec) {
 			dev_err(dev, "Can't find cpu/codec DT node\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0);
 		if (!link->cpu_of_node) {
 			dev_err(card->dev, "error getting cpu phandle\n");
-			return ERR_PTR(-EINVAL);
+			ret = -EINVAL;
+			goto error;
 		}
 
 		link->codec_of_node = of_parse_phandle(codec, "sound-dai", 0);
@@ -132,28 +134,37 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 		ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting cpu dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		ret = snd_soc_of_get_dai_name(codec, &link->codec_dai_name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->platform_of_node = link->cpu_of_node;
 		ret = of_property_read_string(np, "link-name", &link->name);
 		if (ret) {
 			dev_err(card->dev, "error getting codec dai_link name\n");
-			return ERR_PTR(ret);
+			goto error;
 		}
 
 		link->stream_name = link->name;
 		link->init = apq8016_sbc_dai_init;
 		link++;
+
+		of_node_put(cpu);
+		of_node_put(codec);
 	}
 
 	return data;
+
+ error:
+	of_node_put(np);
+	of_node_put(cpu);
+	of_node_put(codec);
+	return ERR_PTR(ret);
 }
 
 static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 122/251] ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 328e9f6973be2ee67862cb17bf6c0c5c5918cd72 ]

The error from snd_usb_mixer_apply_create_quirk() is ignored in the
current usb-audio driver code, which will continue the probing even
after the error.  Let's take it more serious.

Fixes: 7b1eda223deb ("ALSA: usb-mixer: factor out quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 64fa1bbf0acb..54011f8543a7 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2626,7 +2626,9 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
 	    (err = snd_usb_mixer_status_create(mixer)) < 0)
 		goto _error;
 
-	snd_usb_mixer_apply_create_quirk(mixer);
+	err = snd_usb_mixer_apply_create_quirk(mixer);
+	if (err < 0)
+		goto _error;
 
 	err = snd_device_new(chip->card, SNDRV_DEV_CODEC, mixer, &dev_ops);
 	if (err < 0)
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 124/251] ASoC: fix valid stream condition

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 6a7c59c6d9f3b280e81d7a04bbe4e55e90152dce ]

A stream may specify a rate range using 'rate_min' and 'rate_max', so a
stream may be valid and not specify any rates. However, as stream cannot
be valid and not have any channel. Let's use this condition instead to
determine if a stream is valid or not.

Fixes: cde79035c6cf ("ASoC: Handle multiple codecs with split playback / capture")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index d69559e45872..635b22fa1101 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -48,8 +48,8 @@ static bool snd_soc_dai_stream_valid(struct snd_soc_dai *dai, int stream)
 	else
 		codec_stream = &dai->driver->capture;
 
-	/* If the codec specifies any rate at all, it supports the stream. */
-	return codec_stream->rates;
+	/* If the codec specifies any channels at all, it supports the stream */
+	return codec_stream->channels_min;
 }
 
 /**
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 156/251] ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@ti.com>

[ Upstream commit fd14f4436fd47d5418023c90e933e66d3645552e ]

If multiple serializers are connected in the system and the number of
channels will need to use more than one serializer the mask to enable the
serializers were left to 0 if tdm_mask is provided

Fixes: dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support")

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/davinci/davinci-mcasp.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 624c209c9498..d1935c5c3602 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -882,14 +882,13 @@ static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream,
 		active_slots = hweight32(mcasp->tdm_mask[stream]);
 		active_serializers = (channels + active_slots - 1) /
 			active_slots;
-		if (active_serializers == 1) {
+		if (active_serializers == 1)
 			active_slots = channels;
-			for (i = 0; i < total_slots; i++) {
-				if ((1 << i) & mcasp->tdm_mask[stream]) {
-					mask |= (1 << i);
-					if (--active_slots <= 0)
-						break;
-				}
+		for (i = 0; i < total_slots; i++) {
+			if ((1 << i) & mcasp->tdm_mask[stream]) {
+				mask |= (1 << i);
+				if (--active_slots <= 0)
+					break;
 			}
 		}
 	} else {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 174/251] ALSA: aoa: onyx: always initialize register read value

[Sasha Levin]

From: Johannes Berg <johannes@sipsolutions.net>

[ Upstream commit f474808acb3c4b30552d9c59b181244e0300d218 ]

A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.

Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/aoa/codecs/onyx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index a04edff8b729..ae50d59fb810 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -74,8 +74,10 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value)
 		return 0;
 	}
 	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
-	if (v < 0)
+	if (v < 0) {
+		*value = 0;
 		return -1;
+	}
 	*value = (u8)v;
 	onyx->cache[ONYX_REG_CONTROL-FIRSTREGISTER] = *value;
 	return 0;
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 180/251] ASoC: es8328: Fix copy-paste error in es8328_right_line_controls

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 630742c296341a8cfe00dfd941392025ba8dd4e8 ]

It seems 'es8328_rline_enum' should be used
in es8328_right_line_controls

Fixes: 567e4f98922c ("ASoC: add es8328 codec driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092300.68712-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8328.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index 37722194b107..6b22700842e2 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -234,7 +234,7 @@ static const struct soc_enum es8328_rline_enum =
 			      ARRAY_SIZE(es8328_line_texts),
 			      es8328_line_texts);
 static const struct snd_kcontrol_new es8328_right_line_controls =
-	SOC_DAPM_ENUM("Route", es8328_lline_enum);
+	SOC_DAPM_ENUM("Route", es8328_rline_enum);
 
 /* Left Mixer */
 static const struct snd_kcontrol_new es8328_left_mixer_controls[] = {
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 181/251] ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 9b4275c415acca6264a3d7f1182589959c93d530 ]

sound/soc/codecs/cs4349.c:358:32: warning:
 cs4349_runtime_pm defined but not used [-Wunused-const-variable=]

cs4349_runtime_pm ops already defined, it seems
we should enable it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs4349.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/cs4349.c b/sound/soc/codecs/cs4349.c
index 231ca935cdf3..c232c42ccead 100644
--- a/sound/soc/codecs/cs4349.c
+++ b/sound/soc/codecs/cs4349.c
@@ -380,6 +380,7 @@ static struct i2c_driver cs4349_i2c_driver = {
 	.driver = {
 		.name		= "cs4349",
 		.of_match_table	= cs4349_of_match,
+		.pm = &cs4349_runtime_pm,
 	},
 	.id_table	= cs4349_i2c_id,
 	.probe		= cs4349_i2c_probe,
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 182/251] ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 554b75bde64bcad9662530726d1483f7ef012069 ]

sound/soc/codecs/wm8737.c:112:29: warning:
 high_3d defined but not used [-Wunused-const-variable=]

'high_3d' should be used for 3D High Cut-off.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2a9ae13a2641 ("ASoC: Add initial WM8737 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190815091920.64480-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8737.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8737.c b/sound/soc/codecs/wm8737.c
index f0cb1c4afe3c..c5a8d758f58b 100644
--- a/sound/soc/codecs/wm8737.c
+++ b/sound/soc/codecs/wm8737.c
@@ -170,7 +170,7 @@ SOC_DOUBLE("Polarity Invert Switch", WM8737_ADC_CONTROL, 5, 6, 1, 0),
 SOC_SINGLE("3D Switch", WM8737_3D_ENHANCE, 0, 1, 0),
 SOC_SINGLE("3D Depth", WM8737_3D_ENHANCE, 1, 15, 0),
 SOC_ENUM("3D Low Cut-off", low_3d),
-SOC_ENUM("3D High Cut-off", low_3d),
+SOC_ENUM("3D High Cut-off", high_3d),
 SOC_SINGLE_TLV("3D ADC Volume", WM8737_3D_ENHANCE, 7, 1, 1, adc_tlv),
 
 SOC_SINGLE("Noise Gate Switch", WM8737_NOISE_GATE, 0, 1, 0),
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH AUTOSEL 4.9 184/251] ASoC: sun4i-i2s: RX and TX counter registers are swapped

[Sasha Levin]

From: Maxime Ripard <maxime.ripard@bootlin.com>

[ Upstream commit cf2c0e1ce9544df42170fb921f12da82dc0cc8d6 ]

The RX and TX counters registers offset have been swapped, fix that.

Fixes: fa7c0d13cb26 ("ASoC: sunxi: Add Allwinner A10 Digital Audio driver")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/8b26477560ad5fd8f69e037b167c5e61de5c26a3.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 15c92400cea4..02c373c65e19 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -78,8 +78,8 @@
 #define SUN4I_I2S_CLK_DIV_MCLK_MASK		GENMASK(3, 0)
 #define SUN4I_I2S_CLK_DIV_MCLK(mclk)			((mclk) << 0)
 
-#define SUN4I_I2S_RX_CNT_REG		0x28
-#define SUN4I_I2S_TX_CNT_REG		0x2c
+#define SUN4I_I2S_TX_CNT_REG		0x28
+#define SUN4I_I2S_RX_CNT_REG		0x2c
 
 #define SUN4I_I2S_TX_CHAN_SEL_REG	0x30
 #define SUN4I_I2S_TX_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel