[PATCH AUTOSEL 4.4 1/8] ALSA: hda: Don't release card at firmware loading error

[PATCH AUTOSEL 4.4 1/8] ALSA: hda: Don't release card at firmware loading error

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 ]

At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata.  This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.

Instead, we continue the probing as if it were no option set.  This is
often a better choice than the forced abort, too.

Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3e3277100f08a..0fa0c33660087 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1839,24 +1839,15 @@ static void azx_firmware_cb(const struct firmware *fw, void *context)
 {
 	struct snd_card *card = context;
 	struct azx *chip = card->private_data;
-	struct pci_dev *pci = chip->pci;
-
-	if (!fw) {
-		dev_err(card->dev, "Cannot load firmware, aborting\n");
-		goto error;
-	}
 
-	chip->fw = fw;
+	if (fw)
+		chip->fw = fw;
+	else
+		dev_err(card->dev, "Cannot load firmware, continue without patching\n");
 	if (!chip->disabled) {
 		/* continue probing */
-		if (azx_probe_continue(chip))
-			goto error;
+		azx_probe_continue(chip);
 	}
-	return; /* OK */
-
- error:
-	snd_card_free(card);
-	pci_set_drvdata(pci, NULL);
 }
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 2/8] ALSA: hda: Keep the controller initialization even if no codecs found

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]

Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe.  But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM.  More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.

This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0fa0c33660087..8bcf67fe84eb5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1817,7 +1817,7 @@ static int azx_first_init(struct azx *chip)
 	/* codec detection */
 	if (!azx_bus(chip)->codec_mask) {
 		dev_err(card->dev, "no codecs found!\n");
-		return -ENODEV;
+		/* keep running the rest for the runtime PM */
 	}
 
 	if (azx_acquire_irq(chip, 0) < 0)
@@ -2140,9 +2140,11 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 
 	/* create codec instances */
-	err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
-	if (err < 0)
-		goto out_free;
+	if (bus->codec_mask) {
+		err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+		if (err < 0)
+			goto out_free;
+	}
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (chip->fw) {
@@ -2156,7 +2158,7 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
-	if ((probe_only[dev] & 1) == 0) {
+	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
 		if (err < 0)
 			goto out_free;
-- 
2.20.1