alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org,
	"Marcus Cooper" <codekipper@gmail.com>,
	"Clément Péron" <peron.clem@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/7] ASoC: sun4i-i2s: Set sign extend sample
Date: Sun, 26 Apr 2020 12:41:12 +0200	[thread overview]
Message-ID: <20200426104115.22630-5-peron.clem@gmail.com> (raw)
In-Reply-To: <20200426104115.22630-1-peron.clem@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.

This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.

Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep coherency and avoid relying on
default.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index a23c9f2a3f8c..8ea08b49e7fe 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -48,6 +48,9 @@
 #define SUN4I_I2S_FMT0_FMT_I2S				(0 << 0)
 
 #define SUN4I_I2S_FMT1_REG		0x08
+#define SUN4I_I2S_FMT1_REG_SEXT_MASK		BIT(8)
+#define SUN4I_I2S_FMT1_REG_SEXT(sext)			((sext) << 8)
+
 #define SUN4I_I2S_FIFO_TX_REG		0x0c
 #define SUN4I_I2S_FIFO_RX_REG		0x10
 
@@ -105,6 +108,9 @@
 #define SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED		(1 << 7)
 #define SUN8I_I2S_FMT0_BCLK_POLARITY_NORMAL		(0 << 7)
 
+#define SUN8I_I2S_FMT1_REG_SEXT_MASK		GENMASK(5, 4)
+#define SUN8I_I2S_FMT1_REG_SEXT(sext)			((sext) << 4)
+
 #define SUN8I_I2S_INT_STA_REG		0x0c
 #define SUN8I_I2S_FIFO_TX_REG		0x20
 
@@ -663,6 +669,12 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 	}
 	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
 			   SUN4I_I2S_CTRL_MODE_MASK, val);
+
+	/* Set sign extension to pad out LSB with 0 */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+			   SUN4I_I2S_FMT1_REG_SEXT_MASK,
+			   SUN4I_I2S_FMT1_REG_SEXT(0));
+
 	return 0;
 }
 
@@ -765,6 +777,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 			   SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
 			   val);
 
+	/* Set sign extension to pad out LSB with 0 */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+			   SUN8I_I2S_FMT1_REG_SEXT_MASK,
+			   SUN8I_I2S_FMT1_REG_SEXT(0));
+
 	return 0;
 }
 
@@ -867,6 +884,11 @@ static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 			   SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
 			   val);
 
+	/* Set sign extension to pad out LSB with 0 */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+			   SUN8I_I2S_FMT1_REG_SEXT_MASK,
+			   SUN8I_I2S_FMT1_REG_SEXT(0));
+
 	return 0;
 }
 
-- 
2.20.1


  parent reply	other threads:[~2020-04-26 10:46 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-26 10:41 [PATCH v3 0/7] Add H6 I2S support Clément Péron
2020-04-26 10:41 ` [PATCH v3 1/7] ASoC: sun4i-i2s: Adjust LRCLK width Clément Péron
2020-04-28  8:02   ` Maxime Ripard
2020-04-26 10:41 ` [PATCH v3 2/7] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-04-28  8:08   ` Maxime Ripard
2020-05-11 22:26   ` Rob Herring
2020-04-26 10:41 ` [PATCH v3 3/7] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-04-28  8:13   ` Maxime Ripard
2020-04-28  8:55     ` Clément Péron
2020-04-29 12:35       ` Maxime Ripard
2020-04-29 16:33         ` Clément Péron
2020-04-30  8:46           ` Maxime Ripard
2020-04-30 14:00             ` Clément Péron
2020-05-04 12:09               ` Maxime Ripard
2020-05-04 19:43                 ` Clément Péron
2020-07-29 14:39                   ` Maxime Ripard
2020-07-29 15:15                     ` Mark Brown
2020-09-03 20:02                       ` Clément Péron
2020-09-03 20:58                         ` Maxime Ripard
2020-09-04  2:54                           ` Samuel Holland
     [not found]                             ` <20200910143314.qku7po6htiiq5lzf@gilmour.lan>
2020-09-12 20:29                               ` Samuel Holland
2020-09-17 13:21                                 ` Maxime Ripard
2020-09-17 13:55                                   ` Clément Péron
2020-09-17 14:06                                     ` Maxime Ripard
2020-09-20 12:38                                       ` Clément Péron
2020-04-26 10:41 ` Clément Péron [this message]
2020-04-26 10:41 ` [PATCH v3 5/7] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-04-26 10:41 ` [PATCH v3 6/7] ASoC: sun4i-i2s: Adjust regmap settings Clément Péron
2020-04-27 11:03   ` Chen-Yu Tsai
2020-05-03 11:42     ` Clément Péron
2020-04-26 10:41 ` [PATCH v3 7/7] arm64: dts: sun50i-h6: Add HDMI audio to H6 DTSI Clément Péron
2020-04-26 11:51   ` Clément Péron
2020-04-28  8:14   ` Maxime Ripard
2020-04-28 14:36     ` Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200426104115.22630-5-peron.clem@gmail.com \
    --to=peron.clem@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).