From: Maxime Ripard <maxime@cerno.tech>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: devicetree@vger.kernel.org,
Jernej Skrabec <jernej.skrabec@siol.net>,
alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
linux-sunxi@googlegroups.com, Takashi Iwai <tiwai@suse.com>,
Marcus Cooper <codekipper@gmail.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Samuel Holland <samuel@sholland.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params
Date: Mon, 5 Oct 2020 14:13:07 +0200 [thread overview]
Message-ID: <20201005121307.v6jpyeyfi4kxc2cl@gilmour.lan> (raw)
In-Reply-To: <20201003141950.455829-3-peron.clem@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4948 bytes --]
On Sat, Oct 03, 2020 at 04:19:38PM +0200, Clément Péron wrote:
> As slots and slot_width can be set manually using set_tdm().
> These values are then kept in sun4i_i2s struct.
> So we need to check if these values are setted or not
> in the struct.
>
> Avoid to check for this logic in set_chan_cfg(). This will
> duplicate the same check instead pass the required values
> as params to set_chan_cfg().
>
> This will also avoid a bug when we will enable 20/24bits support,
> i2s->slot_width is not actually used in the lrck_period computation.
>
> Suggested-by: Samuel Holland <samuel@sholland.org>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> sound/soc/sunxi/sun4i-i2s.c | 36 ++++++++++++++----------------------
> 1 file changed, 14 insertions(+), 22 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index c5ccd423e6d3..1f577dbc20a6 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -177,8 +177,9 @@ struct sun4i_i2s_quirks {
> unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
> s8 (*get_sr)(const struct sun4i_i2s *, int);
> s8 (*get_wss)(const struct sun4i_i2s *, int);
> - int (*set_chan_cfg)(const struct sun4i_i2s *,
> - const struct snd_pcm_hw_params *);
> + int (*set_chan_cfg)(const struct sun4i_i2s *i2s,
> + unsigned int channels, unsigned int slots,
> + unsigned int slot_width);
> int (*set_fmt)(const struct sun4i_i2s *, unsigned int);
> };
>
> @@ -414,10 +415,9 @@ static s8 sun8i_i2s_get_sr_wss(const struct sun4i_i2s *i2s, int width)
> }
>
> static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> - const struct snd_pcm_hw_params *params)
> + unsigned int channels, unsigned int slots,
> + unsigned int slot_width)
> {
> - unsigned int channels = params_channels(params);
> -
> /* Map the channels for playback and capture */
> regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG, 0x76543210);
> regmap_write(i2s->regmap, SUN4I_I2S_RX_CHAN_MAP_REG, 0x00003210);
> @@ -434,15 +434,11 @@ static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> }
>
> static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> - const struct snd_pcm_hw_params *params)
> + unsigned int channels, unsigned int slots,
> + unsigned int slot_width)
> {
> - unsigned int channels = params_channels(params);
> - unsigned int slots = channels;
> unsigned int lrck_period;
>
> - if (i2s->slots)
> - slots = i2s->slots;
> -
> /* Map the channels for playback and capture */
> regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_MAP_REG, 0x76543210);
> regmap_write(i2s->regmap, SUN8I_I2S_RX_CHAN_MAP_REG, 0x76543210);
> @@ -467,11 +463,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> case SND_SOC_DAIFMT_DSP_B:
> case SND_SOC_DAIFMT_LEFT_J:
> case SND_SOC_DAIFMT_RIGHT_J:
> - lrck_period = params_physical_width(params) * slots;
> + lrck_period = slot_width * slots;
> break;
>
> case SND_SOC_DAIFMT_I2S:
> - lrck_period = params_physical_width(params);
> + lrck_period = slot_width;
> break;
>
> default:
> @@ -490,15 +486,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> }
>
> static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> - const struct snd_pcm_hw_params *params)
> + unsigned int channels, unsigned int slots,
> + unsigned int slot_width)
> {
> - unsigned int channels = params_channels(params);
> - unsigned int slots = channels;
> unsigned int lrck_period;
>
> - if (i2s->slots)
> - slots = i2s->slots;
> -
> /* Map the channels for playback and capture */
> regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0xFEDCBA98);
> regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
> @@ -525,11 +517,11 @@ static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> case SND_SOC_DAIFMT_DSP_B:
> case SND_SOC_DAIFMT_LEFT_J:
> case SND_SOC_DAIFMT_RIGHT_J:
> - lrck_period = params_physical_width(params) * slots;
> + lrck_period = slot_width * slots;
> break;
>
> case SND_SOC_DAIFMT_I2S:
> - lrck_period = params_physical_width(params);
> + lrck_period = slot_width;
> break;
>
> default:
> @@ -565,7 +557,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> if (i2s->slot_width)
> slot_width = i2s->slot_width;
>
> - ret = i2s->variant->set_chan_cfg(i2s, params);
> + ret = i2s->variant->set_chan_cfg(i2s, channels, slots, slot_width);
Isn't slots and slot_width set to 0 here ?
And therefore, wouldn't we set lrck_period to 0 if we're using any
format but I2S?
More importantly, I'm not really convinced this needs to be done, and it
introduces some side effects that are not explained.
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2020-10-05 12:14 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-03 14:19 [PATCH v6 00/14] Add Allwinner H3/H5/H6/A64 HDMI audio Clément Péron
2020-10-03 14:19 ` [PATCH v6 01/14] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-10-03 14:19 ` [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params Clément Péron
2020-10-05 12:13 ` Maxime Ripard [this message]
2020-10-05 13:23 ` Clément Péron
2020-10-12 12:15 ` Maxime Ripard
2020-10-13 1:15 ` Samuel Holland
2020-10-19 10:24 ` Maxime Ripard
2020-10-06 5:03 ` Samuel Holland
2020-10-12 12:20 ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 03/14] ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit Clément Péron
2020-10-05 12:14 ` Maxime Ripard
2020-10-05 13:35 ` Clément Péron
2020-10-03 14:19 ` [PATCH v6 04/14] ASoC: sun4i-i2s: Set sign extend sample Clément Péron
2020-10-03 14:19 ` [PATCH v6 05/14] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-10-03 14:19 ` [PATCH v6 06/14] ASoC: sun4i-i2s: Fix sun8i volatile regs Clément Péron
2020-10-03 14:19 ` [PATCH v6 07/14] ASoC: sun4i-i2s: Fix setting of FIFO modes Clément Péron
2020-10-03 14:19 ` [PATCH v6 08/14] ASoC: sun4i-i2s: fix coding-style for callback definition Clément Péron
2020-10-05 12:14 ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 09/14] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-10-03 14:19 ` [PATCH v6 10/14] arm64: dts: allwinner: h6: Add I2S1 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 11/14] arm64: dts: allwinner: a64: Add I2S2 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 12/14] arm64: defconfig: Enable Allwinner i2s driver Clément Péron
2020-10-03 14:19 ` [PATCH v6 13/14] dt-bindings: sound: sun4i-i2s: Document H3 with missing RX channel possibility Clément Péron
2020-10-06 21:11 ` Rob Herring
2020-10-03 14:19 ` [PATCH v6 14/14] arm: dts: sunxi: h3/h5: Add I2S2 node Clément Péron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201005121307.v6jpyeyfi4kxc2cl@gilmour.lan \
--to=maxime@cerno.tech \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=codekipper@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@siol.net \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=peron.clem@gmail.com \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).