[PATCH v7 00/14] Add Allwinner H3/H5/H6/A64 HDMI audio

[PATCH v7 00/14] Add Allwinner H3/H5/H6/A64 HDMI audio

[Clément Péron]

Hi,

Just some minor changes compare to v6.

As explain in v6 there is no more HDMI soundcard,
I will try to introduce a dedicated Allwinner soundcard
in a next series.

Clément

Change since v6:
- move set_channel_cfg() in first position
- convert return value to decimal

Change since v5:
- Drop HDMI simple soundcard
- Collect Chen-Yu Tsai tags
- Configure channels from 9 to 15.
- Remove DMA RX for H3/H5
- Fix Documentation for H3/H5

Change since v4:
- add more comment on get_wss() and set_channel_cfg() patch
- merge soundcard and DAI HDMI patches

Change since v3:
- add Samuel Holland patch to reconfigure FIFO_TX_REG when suspend is enabled
- readd inversion to H6 LRCK sun50i_h6_i2s_set_soc_fmt()
- Fix get_wss() for sun4i
- Add a commit to fix checkpatch warning

Change since v2:
- rebase on next-20200918
- drop revert LRCK polarity patch
- readd simple-audio-card,frame-inversion in dts
- Add patch for changing set_chan_cfg params

Change since v1:
- rebase on next-20200828
- add revert LRCK polarity
- remove all simple-audio-card,frame-inversion in dts
- add Ondrej patches for Orange Pi board
- Add arm64 defconfig patch

Clément Péron (6):
  ASoC: sun4i-i2s: Change set_chan_cfg() params
  ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit
  ASoC: sun4i-i2s: Fix sun8i volatile regs
  ASoC: sun4i-i2s: fix coding-style for callback definition
  arm64: defconfig: Enable Allwinner i2s driver
  dt-bindings: sound: sun4i-i2s: Document H3 with missing RX channel
    possibility

Jernej Skrabec (3):
  ASoC: sun4i-i2s: Add support for H6 I2S
  dt-bindings: ASoC: sun4i-i2s: Add H6 compatible
  arm64: dts: allwinner: h6: Add I2S1 node

Marcus Cooper (4):
  ASoC: sun4i-i2s: Set sign extend sample
  ASoc: sun4i-i2s: Add 20 and 24 bit support
  arm64: dts: allwinner: a64: Add I2S2 node
  arm: dts: sunxi: h3/h5: Add I2S2 node

Samuel Holland (1):
  ASoC: sun4i-i2s: Fix setting of FIFO modes

 .../sound/allwinner,sun4i-a10-i2s.yaml        |   6 +-
 arch/arm/boot/dts/sunxi-h3-h5.dtsi            |  13 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi |  14 +
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |  13 +
 arch/arm64/configs/defconfig                  |   1 +
 sound/soc/sunxi/sun4i-i2s.c                   | 376 +++++++++++++++---
 6 files changed, 368 insertions(+), 55 deletions(-)

-- 
2.25.1

[PATCH v7 01/14] ASoC: sun4i-i2s: Change set_chan_cfg() params

[Clément Péron]

As slots and slot_width can be set manually using set_tdm().
These values are then kept in sun4i_i2s struct.
So we need to check if these values are set or not.

This is not done actually and will trigger a bug.
For example, if we set to the simple soundcard in the device-tree
dai-tdm-slot-width = <32> and then start a stream using S16_LE,
currently we would calculate BCLK for 32-bit slots, but program
lrck_period for 16-bit slots, making the sample rate double what we
expected.

To fix this, we need to check if these values are set or not but as
this logic is already done by the caller. Avoid duplicating this
logic and just pass the required values as params to set_chan_cfg().

Suggested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index f23ff29e7c1d..bfbd4207d075 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -162,8 +162,9 @@ struct sun4i_i2s_quirks {
 	unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
 	s8	(*get_sr)(const struct sun4i_i2s *, int);
 	s8	(*get_wss)(const struct sun4i_i2s *, int);
-	int	(*set_chan_cfg)(const struct sun4i_i2s *,
-				const struct snd_pcm_hw_params *);
+	int	(*set_chan_cfg)(const struct sun4i_i2s *i2s,
+				unsigned int channels,	unsigned int slots,
+				unsigned int slot_width);
 	int	(*set_fmt)(const struct sun4i_i2s *, unsigned int);
 };
 
@@ -399,10 +400,9 @@ static s8 sun8i_i2s_get_sr_wss(const struct sun4i_i2s *i2s, int width)
 }
 
 static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
-				  const struct snd_pcm_hw_params *params)
+				  unsigned int channels, unsigned int slots,
+				  unsigned int slot_width)
 {
-	unsigned int channels = params_channels(params);
-
 	/* Map the channels for playback and capture */
 	regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG, 0x76543210);
 	regmap_write(i2s->regmap, SUN4I_I2S_RX_CHAN_MAP_REG, 0x00003210);
@@ -419,15 +419,11 @@ static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
 }
 
 static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
-				  const struct snd_pcm_hw_params *params)
+				  unsigned int channels, unsigned int slots,
+				  unsigned int slot_width)
 {
-	unsigned int channels = params_channels(params);
-	unsigned int slots = channels;
 	unsigned int lrck_period;
 
-	if (i2s->slots)
-		slots = i2s->slots;
-
 	/* Map the channels for playback and capture */
 	regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_MAP_REG, 0x76543210);
 	regmap_write(i2s->regmap, SUN8I_I2S_RX_CHAN_MAP_REG, 0x76543210);
@@ -452,11 +448,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
 	case SND_SOC_DAIFMT_DSP_B:
 	case SND_SOC_DAIFMT_LEFT_J:
 	case SND_SOC_DAIFMT_RIGHT_J:
-		lrck_period = params_physical_width(params) * slots;
+		lrck_period = slot_width * slots;
 		break;
 
 	case SND_SOC_DAIFMT_I2S:
-		lrck_period = params_physical_width(params);
+		lrck_period = slot_width;
 		break;
 
 	default:
@@ -492,7 +488,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	if (i2s->slot_width)
 		slot_width = i2s->slot_width;
 
-	ret = i2s->variant->set_chan_cfg(i2s, params);
+	ret = i2s->variant->set_chan_cfg(i2s, channels, slots, slot_width);
 	if (ret < 0) {
 		dev_err(dai->dev, "Invalid channel configuration\n");
 		return ret;
-- 
2.25.1

[PATCH v7 02/14] ASoC: sun4i-i2s: Add support for H6 I2S

[Clément Péron]

From: Jernej Skrabec <jernej.skrabec@siol.net>

H6 I2S is very similar to that in H3, except it supports up to 16
channels.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 222 ++++++++++++++++++++++++++++++++++++
 1 file changed, 222 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index bfbd4207d075..1f577dbc20a6 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -124,6 +124,21 @@
 #define SUN8I_I2S_RX_CHAN_SEL_REG	0x54
 #define SUN8I_I2S_RX_CHAN_MAP_REG	0x58
 
+/* Defines required for sun50i-h6 support */
+#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK	GENMASK(21, 20)
+#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset)	((offset) << 20)
+#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK		GENMASK(19, 16)
+#define SUN50I_H6_I2S_TX_CHAN_SEL(chan)		((chan - 1) << 16)
+#define SUN50I_H6_I2S_TX_CHAN_EN_MASK		GENMASK(15, 0)
+#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan)	(((1 << num_chan) - 1))
+
+#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG	0x44
+#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG	0x48
+
+#define SUN50I_H6_I2S_RX_CHAN_SEL_REG	0x64
+#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG	0x68
+#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG	0x6C
+
 struct sun4i_i2s;
 
 /**
@@ -470,6 +485,60 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
 	return 0;
 }
 
+static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
+				      unsigned int channels, unsigned int slots,
+				      unsigned int slot_width)
+{
+	unsigned int lrck_period;
+
+	/* Map the channels for playback and capture */
+	regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0xFEDCBA98);
+	regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
+	regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0xFEDCBA98);
+	regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
+
+	/* Configure the channels */
+	regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
+			   SUN50I_H6_I2S_TX_CHAN_SEL(channels));
+	regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_MASK,
+			   SUN50I_H6_I2S_TX_CHAN_SEL(channels));
+
+	regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+			   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
+			   SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
+	regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
+			   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM_MASK,
+			   SUN8I_I2S_CHAN_CFG_RX_SLOT_NUM(channels));
+
+	switch (i2s->format & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+	case SND_SOC_DAIFMT_LEFT_J:
+	case SND_SOC_DAIFMT_RIGHT_J:
+		lrck_period = slot_width * slots;
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+		lrck_period = slot_width;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
+			   SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
+			   SUN8I_I2S_FMT0_LRCK_PERIOD(lrck_period));
+
+	regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+			   SUN50I_H6_I2S_TX_CHAN_EN_MASK,
+			   SUN50I_H6_I2S_TX_CHAN_EN(channels));
+
+	return 0;
+}
+
 static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 			       struct snd_pcm_hw_params *params,
 			       struct snd_soc_dai *dai)
@@ -695,6 +764,108 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 	return 0;
 }
 
+static int sun50i_h6_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
+				     unsigned int fmt)
+{
+	u32 mode, val;
+	u8 offset;
+
+	/*
+	 * DAI clock polarity
+	 *
+	 * The setup for LRCK contradicts the datasheet, but under a
+	 * scope it's clear that the LRCK polarity is reversed
+	 * compared to the expected polarity on the bus.
+	 */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_IF:
+		/* Invert both clocks */
+		val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		/* Invert bit clock */
+		val = SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED |
+		      SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		/* Invert frame clock */
+		val = 0;
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		val = SUN8I_I2S_FMT0_LRCLK_POLARITY_INVERTED;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
+			   SUN8I_I2S_FMT0_LRCLK_POLARITY_MASK |
+			   SUN8I_I2S_FMT0_BCLK_POLARITY_MASK,
+			   val);
+
+	/* DAI Mode */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		mode = SUN8I_I2S_CTRL_MODE_PCM;
+		offset = 1;
+		break;
+
+	case SND_SOC_DAIFMT_DSP_B:
+		mode = SUN8I_I2S_CTRL_MODE_PCM;
+		offset = 0;
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+		mode = SUN8I_I2S_CTRL_MODE_LEFT;
+		offset = 1;
+		break;
+
+	case SND_SOC_DAIFMT_LEFT_J:
+		mode = SUN8I_I2S_CTRL_MODE_LEFT;
+		offset = 0;
+		break;
+
+	case SND_SOC_DAIFMT_RIGHT_J:
+		mode = SUN8I_I2S_CTRL_MODE_RIGHT;
+		offset = 0;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+			   SUN8I_I2S_CTRL_MODE_MASK, mode);
+	regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset));
+	regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_SEL_REG,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK,
+			   SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset));
+
+	/* DAI clock master masks */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* BCLK and LRCLK master */
+		val = SUN8I_I2S_CTRL_BCLK_OUT |	SUN8I_I2S_CTRL_LRCK_OUT;
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* BCLK and LRCLK slave */
+		val = 0;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
+			   SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
+			   val);
+
+	return 0;
+}
+
 static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
@@ -975,6 +1146,22 @@ static const struct reg_default sun8i_i2s_reg_defaults[] = {
 	{ SUN8I_I2S_RX_CHAN_MAP_REG, 0x00000000 },
 };
 
+static const struct reg_default sun50i_h6_i2s_reg_defaults[] = {
+	{ SUN4I_I2S_CTRL_REG, 0x00060000 },
+	{ SUN4I_I2S_FMT0_REG, 0x00000033 },
+	{ SUN4I_I2S_FMT1_REG, 0x00000030 },
+	{ SUN4I_I2S_FIFO_CTRL_REG, 0x000400f0 },
+	{ SUN4I_I2S_DMA_INT_CTRL_REG, 0x00000000 },
+	{ SUN4I_I2S_CLK_DIV_REG, 0x00000000 },
+	{ SUN8I_I2S_CHAN_CFG_REG, 0x00000000 },
+	{ SUN8I_I2S_TX_CHAN_SEL_REG, 0x00000000 },
+	{ SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0x00000000 },
+	{ SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x00000000 },
+	{ SUN50I_H6_I2S_RX_CHAN_SEL_REG, 0x00000000 },
+	{ SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0x00000000 },
+	{ SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x00000000 },
+};
+
 static const struct regmap_config sun4i_i2s_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -1002,6 +1189,19 @@ static const struct regmap_config sun8i_i2s_regmap_config = {
 	.volatile_reg	= sun8i_i2s_volatile_reg,
 };
 
+static const struct regmap_config sun50i_h6_i2s_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= SUN50I_H6_I2S_RX_CHAN_MAP1_REG,
+	.cache_type	= REGCACHE_FLAT,
+	.reg_defaults	= sun50i_h6_i2s_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(sun50i_h6_i2s_reg_defaults),
+	.writeable_reg	= sun4i_i2s_wr_reg,
+	.readable_reg	= sun8i_i2s_rd_reg,
+	.volatile_reg	= sun8i_i2s_volatile_reg,
+};
+
 static int sun4i_i2s_runtime_resume(struct device *dev)
 {
 	struct sun4i_i2s *i2s = dev_get_drvdata(dev);
@@ -1160,6 +1360,24 @@ static const struct sun4i_i2s_quirks sun50i_a64_codec_i2s_quirks = {
 	.set_fmt		= sun4i_i2s_set_soc_fmt,
 };
 
+static const struct sun4i_i2s_quirks sun50i_h6_i2s_quirks = {
+	.has_reset		= true,
+	.reg_offset_txdata	= SUN8I_I2S_FIFO_TX_REG,
+	.sun4i_i2s_regmap	= &sun50i_h6_i2s_regmap_config,
+	.field_clkdiv_mclk_en	= REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
+	.field_fmt_wss		= REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
+	.field_fmt_sr		= REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
+	.bclk_dividers		= sun8i_i2s_clk_div,
+	.num_bclk_dividers	= ARRAY_SIZE(sun8i_i2s_clk_div),
+	.mclk_dividers		= sun8i_i2s_clk_div,
+	.num_mclk_dividers	= ARRAY_SIZE(sun8i_i2s_clk_div),
+	.get_bclk_parent_rate	= sun8i_i2s_get_bclk_parent_rate,
+	.get_sr			= sun8i_i2s_get_sr_wss,
+	.get_wss		= sun8i_i2s_get_sr_wss,
+	.set_chan_cfg		= sun50i_h6_i2s_set_chan_cfg,
+	.set_fmt		= sun50i_h6_i2s_set_soc_fmt,
+};
+
 static int sun4i_i2s_init_regmap_fields(struct device *dev,
 					struct sun4i_i2s *i2s)
 {
@@ -1329,6 +1547,10 @@ static const struct of_device_id sun4i_i2s_match[] = {
 		.compatible = "allwinner,sun50i-a64-codec-i2s",
 		.data = &sun50i_a64_codec_i2s_quirks,
 	},
+	{
+		.compatible = "allwinner,sun50i-h6-i2s",
+		.data = &sun50i_h6_i2s_quirks,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, sun4i_i2s_match);
-- 
2.25.1

[PATCH v7 03/14] ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit

[Clément Péron]

We are actually using a complex formula to just return a bunch of
simple values. Also this formula is wrong for sun4i when calling
get_wss() the function return 4 instead of 3.

Replace this with a simpler switch case.

Also drop the i2s params which is unused and return a simple int as
returning an error code could be out of range for an s8 and there is
no optim to return a s8 here.

Fixes: 619c15f7fac9 ("ASoC: sun4i-i2s: Change SR and WSS computation")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 69 +++++++++++++++++++++++--------------
 1 file changed, 44 insertions(+), 25 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 1f577dbc20a6..f1fdb9a0ba54 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -175,8 +175,8 @@ struct sun4i_i2s_quirks {
 	unsigned int			num_mclk_dividers;
 
 	unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
-	s8	(*get_sr)(const struct sun4i_i2s *, int);
-	s8	(*get_wss)(const struct sun4i_i2s *, int);
+	int	(*get_sr)(unsigned int width);
+	int	(*get_wss)(unsigned int width);
 	int	(*set_chan_cfg)(const struct sun4i_i2s *i2s,
 				unsigned int channels,	unsigned int slots,
 				unsigned int slot_width);
@@ -381,37 +381,56 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
 	return 0;
 }
 
-static s8 sun4i_i2s_get_sr(const struct sun4i_i2s *i2s, int width)
+static int sun4i_i2s_get_sr(unsigned int width)
 {
-	if (width < 16 || width > 24)
-		return -EINVAL;
-
-	if (width % 4)
-		return -EINVAL;
+	switch (width) {
+	case 16:
+		return 0;
+	case 20:
+		return 1;
+	case 24:
+		return 2;
+	}
 
-	return (width - 16) / 4;
+	return -EINVAL;
 }
 
-static s8 sun4i_i2s_get_wss(const struct sun4i_i2s *i2s, int width)
+static int sun4i_i2s_get_wss(unsigned int width)
 {
-	if (width < 16 || width > 32)
-		return -EINVAL;
-
-	if (width % 4)
-		return -EINVAL;
+	switch (width) {
+	case 16:
+		return 0;
+	case 20:
+		return 1;
+	case 24:
+		return 2;
+	case 32:
+		return 3;
+	}
 
-	return (width - 16) / 4;
+	return -EINVAL;
 }
 
-static s8 sun8i_i2s_get_sr_wss(const struct sun4i_i2s *i2s, int width)
+static int sun8i_i2s_get_sr_wss(unsigned int width)
 {
-	if (width % 4)
-		return -EINVAL;
-
-	if (width < 8 || width > 32)
-		return -EINVAL;
+	switch (width) {
+	case 8:
+		return 1;
+	case 12:
+		return 2;
+	case 16:
+		return 3;
+	case 20:
+		return 4;
+	case 24:
+		return 5;
+	case 28:
+		return 6;
+	case 32:
+		return 7;
+	}
 
-	return (width - 8) / 4 + 1;
+	return -EINVAL;
 }
 
 static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
@@ -574,11 +593,11 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	}
 	i2s->playback_dma_data.addr_width = width;
 
-	sr = i2s->variant->get_sr(i2s, word_size);
+	sr = i2s->variant->get_sr(word_size);
 	if (sr < 0)
 		return -EINVAL;
 
-	wss = i2s->variant->get_wss(i2s, slot_width);
+	wss = i2s->variant->get_wss(slot_width);
 	if (wss < 0)
 		return -EINVAL;
 
-- 
2.25.1

[PATCH v7 04/14] ASoC: sun4i-i2s: Set sign extend sample

[Clément Péron]

From: Marcus Cooper <codekipper@gmail.com>

On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.

This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.

Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep consistency and avoid relying on
default.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index f1fdb9a0ba54..0b242f4615fe 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -48,6 +48,9 @@
 #define SUN4I_I2S_FMT0_FMT_I2S				(0 << 0)
 
 #define SUN4I_I2S_FMT1_REG		0x08
+#define SUN4I_I2S_FMT1_REG_SEXT_MASK		BIT(8)
+#define SUN4I_I2S_FMT1_REG_SEXT(sext)			((sext) << 8)
+
 #define SUN4I_I2S_FIFO_TX_REG		0x0c
 #define SUN4I_I2S_FIFO_RX_REG		0x10
 
@@ -105,6 +108,9 @@
 #define SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED		(1 << 7)
 #define SUN8I_I2S_FMT0_BCLK_POLARITY_NORMAL		(0 << 7)
 
+#define SUN8I_I2S_FMT1_REG_SEXT_MASK		GENMASK(5, 4)
+#define SUN8I_I2S_FMT1_REG_SEXT(sext)			((sext) << 4)
+
 #define SUN8I_I2S_INT_STA_REG		0x0c
 #define SUN8I_I2S_FIFO_TX_REG		0x20
 
@@ -678,6 +684,7 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 	}
 	regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
 			   SUN4I_I2S_CTRL_MODE_MASK, val);
+
 	return 0;
 }
 
@@ -780,6 +787,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 			   SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
 			   val);
 
+	/* Set sign extension to pad out LSB with 0 */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+			   SUN8I_I2S_FMT1_REG_SEXT_MASK,
+			   SUN8I_I2S_FMT1_REG_SEXT(0));
+
 	return 0;
 }
 
@@ -882,6 +894,11 @@ static int sun50i_h6_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
 			   SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
 			   val);
 
+	/* Set sign extension to pad out LSB with 0 */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+			   SUN8I_I2S_FMT1_REG_SEXT_MASK,
+			   SUN8I_I2S_FMT1_REG_SEXT(0));
+
 	return 0;
 }
 
-- 
2.25.1

[PATCH v7 05/14] ASoc: sun4i-i2s: Add 20 and 24 bit support

[Clément Péron]

From: Marcus Cooper <codekipper@gmail.com>

Extend the functionality of the driver to include support of 20 and
24 bits per sample.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 0b242f4615fe..d5eba58ff207 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -592,6 +592,9 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	case 16:
 		width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		break;
+	case 32:
+		width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
 	default:
 		dev_err(dai->dev, "Unsupported physical sample width: %d\n",
 			params_physical_width(params));
@@ -1073,6 +1076,10 @@ static int sun4i_i2s_dai_probe(struct snd_soc_dai *dai)
 	return 0;
 }
 
+#define SUN4I_FORMATS	(SNDRV_PCM_FMTBIT_S16_LE | \
+			 SNDRV_PCM_FMTBIT_S20_LE | \
+			 SNDRV_PCM_FMTBIT_S24_LE)
+
 static struct snd_soc_dai_driver sun4i_i2s_dai = {
 	.probe = sun4i_i2s_dai_probe,
 	.capture = {
@@ -1080,14 +1087,14 @@ static struct snd_soc_dai_driver sun4i_i2s_dai = {
 		.channels_min = 1,
 		.channels_max = 8,
 		.rates = SNDRV_PCM_RATE_8000_192000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		.formats = SUN4I_FORMATS,
 	},
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 8,
 		.rates = SNDRV_PCM_RATE_8000_192000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		.formats = SUN4I_FORMATS,
 	},
 	.ops = &sun4i_i2s_dai_ops,
 	.symmetric_rates = 1,
-- 
2.25.1

[PATCH v7 06/14] ASoC: sun4i-i2s: Fix sun8i volatile regs

[Clément Péron]

The FIFO TX reg is volatile and sun8i i2s register
mapping is different from sun4i.

Even if in this case it's doesn't create an issue,
Avoid setting some regs that are undefined in sun8i.

Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index d5eba58ff207..3fc0bd818539 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -1154,12 +1154,19 @@ static bool sun8i_i2s_rd_reg(struct device *dev, unsigned int reg)
 
 static bool sun8i_i2s_volatile_reg(struct device *dev, unsigned int reg)
 {
-	if (reg == SUN8I_I2S_INT_STA_REG)
+	switch (reg) {
+	case SUN4I_I2S_FIFO_CTRL_REG:
+	case SUN4I_I2S_FIFO_RX_REG:
+	case SUN4I_I2S_FIFO_STA_REG:
+	case SUN4I_I2S_RX_CNT_REG:
+	case SUN4I_I2S_TX_CNT_REG:
+	case SUN8I_I2S_FIFO_TX_REG:
+	case SUN8I_I2S_INT_STA_REG:
 		return true;
-	if (reg == SUN8I_I2S_FIFO_TX_REG)
-		return false;
 
-	return sun4i_i2s_volatile_reg(dev, reg);
+	default:
+		return false;
+	}
 }
 
 static const struct reg_default sun4i_i2s_reg_defaults[] = {
-- 
2.25.1

[PATCH v7 07/14] ASoC: sun4i-i2s: Fix setting of FIFO modes

[Clément Péron]

From: Samuel Holland <samuel@sholland.org>

Because SUN4I_I2S_FIFO_CTRL_REG is volatile, writes done while the
regmap is cache-only are ignored. To work around this, move the
configuration to a callback that runs while the ASoC core has a
runtime PM reference to the device.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 3fc0bd818539..e7b9dcbf82db 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -588,6 +588,13 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 		return ret;
 	}
 
+	/* Set significant bits in our FIFOs */
+	regmap_update_bits(i2s->regmap, SUN4I_I2S_FIFO_CTRL_REG,
+			   SUN4I_I2S_FIFO_CTRL_TX_MODE_MASK |
+			   SUN4I_I2S_FIFO_CTRL_RX_MODE_MASK,
+			   SUN4I_I2S_FIFO_CTRL_TX_MODE(1) |
+			   SUN4I_I2S_FIFO_CTRL_RX_MODE(1));
+
 	switch (params_physical_width(params)) {
 	case 16:
 		width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -916,13 +923,6 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return ret;
 	}
 
-	/* Set significant bits in our FIFOs */
-	regmap_update_bits(i2s->regmap, SUN4I_I2S_FIFO_CTRL_REG,
-			   SUN4I_I2S_FIFO_CTRL_TX_MODE_MASK |
-			   SUN4I_I2S_FIFO_CTRL_RX_MODE_MASK,
-			   SUN4I_I2S_FIFO_CTRL_TX_MODE(1) |
-			   SUN4I_I2S_FIFO_CTRL_RX_MODE(1));
-
 	i2s->format = fmt;
 
 	return 0;
-- 
2.25.1

[PATCH v7 08/14] ASoC: sun4i-i2s: fix coding-style for callback definition

[Clément Péron]

Checkpatch script produces warning:
WARNING: function definition argument 'const struct sun4i_i2s *'
should also have an identifier name.

Let's fix this by adding identifier name to get_bclk_parent_rate()
and set_fmt() callback definition.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index e7b9dcbf82db..b2923d4c03af 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -180,13 +180,13 @@ struct sun4i_i2s_quirks {
 	const struct sun4i_i2s_clk_div	*mclk_dividers;
 	unsigned int			num_mclk_dividers;
 
-	unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
+	unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *i2s);
 	int	(*get_sr)(unsigned int width);
 	int	(*get_wss)(unsigned int width);
 	int	(*set_chan_cfg)(const struct sun4i_i2s *i2s,
 				unsigned int channels,	unsigned int slots,
 				unsigned int slot_width);
-	int	(*set_fmt)(const struct sun4i_i2s *, unsigned int);
+	int	(*set_fmt)(const struct sun4i_i2s *i2s, unsigned int fmt);
 };
 
 struct sun4i_i2s {
-- 
2.25.1

[PATCH v7 09/14] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible

[Clément Péron]

From: Jernej Skrabec <jernej.skrabec@siol.net>

H6 I2S is very similar to H3, except that it supports up to 16 channels
and thus few registers have fields on different position.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 .../devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml      | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 112ae00d63c1..606ad2d884a8 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -24,6 +24,7 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-i2s
           - const: allwinner,sun8i-h3-i2s
+      - const: allwinner,sun50i-h6-i2s
 
   reg:
     maxItems: 1
@@ -59,6 +60,7 @@ allOf:
               - allwinner,sun8i-a83t-i2s
               - allwinner,sun8i-h3-i2s
               - allwinner,sun50i-a64-codec-i2s
+              - allwinner,sun50i-h6-i2s
 
     then:
       required:
-- 
2.25.1

[PATCH v7 10/14] arm64: dts: allwinner: h6: Add I2S1 node

[Clément Péron]

From: Jernej Skrabec <jernej.skrabec@siol.net>

Add Allwinner H6 I2S1 node connected to HDMI interface.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 28c77d6872f6..d915aeb13297 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -609,6 +609,19 @@ mdio: mdio {
 			};
 		};
 
+		i2s1: i2s@5091000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-i2s";
+			reg = <0x05091000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		spdif: spdif@5093000 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun50i-h6-spdif";
-- 
2.25.1

[PATCH v7 11/14] arm64: dts: allwinner: a64: Add I2S2 node

[Clément Péron]

From: Marcus Cooper <codekipper@gmail.com>

Add the I2S2 node connected to the HDMI interface.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index dc238814013c..51cc30e84e26 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -846,6 +846,20 @@ i2s1: i2s@1c22400 {
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 27>, <&dma 27>;
+			status = "disabled";
+		};
+
 		dai: dai@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun50i-a64-codec-i2s";
-- 
2.25.1

[PATCH v7 12/14] arm64: defconfig: Enable Allwinner i2s driver

[Clément Péron]

Enable Allwinner I2S driver for arm64 defconfig.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 63003ec116ee..9a3c3bbe60e4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -696,6 +696,7 @@ CONFIG_SND_SOC_ROCKCHIP_RT5645=m
 CONFIG_SND_SOC_RK3399_GRU_SOUND=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SUN4I_I2S=m
 CONFIG_SND_SUN4I_SPDIF=m
 CONFIG_SND_SOC_TEGRA=m
 CONFIG_SND_SOC_TEGRA210_AHUB=m
-- 
2.25.1

[PATCH v7 13/14] dt-bindings: sound: sun4i-i2s: Document H3 with missing RX channel possibility

[Clément Péron]

Like A83T the Allwinner H3 doesn't have the DMA reception available for
some audio interfaces.

As it's already documented for A83T convert this to an enum and add the H3
interface.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 .../devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 606ad2d884a8..a16e37b01e1d 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -70,7 +70,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-a83t-i2s
+            enum:
+              - allwinner,sun8i-a83t-i2s
+              - allwinner,sun8i-h3-i2s
 
     then:
       properties:
-- 
2.25.1

[PATCH v7 14/14] arm: dts: sunxi: h3/h5: Add I2S2 node

[Clément Péron]

From: Marcus Cooper <codekipper@gmail.com>

Add H3/H5 I2S2 node connected to the HDMI interface.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 22d533d18992..9be13378d4df 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -662,6 +662,19 @@ i2s1: i2s@1c22400 {
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
-- 
2.25.1

Re: [PATCH v7 01/14] ASoC: sun4i-i2s: Change set_chan_cfg() params

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 977 bytes --]

On Sun, Oct 11, 2020 at 10:22:11PM +0200, Clément Péron wrote:
> As slots and slot_width can be set manually using set_tdm().
> These values are then kept in sun4i_i2s struct.
> So we need to check if these values are set or not.
> 
> This is not done actually and will trigger a bug.
> For example, if we set to the simple soundcard in the device-tree
> dai-tdm-slot-width = <32> and then start a stream using S16_LE,
> currently we would calculate BCLK for 32-bit slots, but program
> lrck_period for 16-bit slots, making the sample rate double what we
> expected.
> 
> To fix this, we need to check if these values are set or not but as
> this logic is already done by the caller. Avoid duplicating this
> logic and just pass the required values as params to set_chan_cfg().
> 
> Suggested-by: Samuel Holland <samuel@sholland.org>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>

We still have an ongoing discussion on this one in the v6

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]