From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Cc: Matwey Kornilov <matwey.kornilov@gmail.com>,
Dylan Robinson <dylan_robinson@motu.com>,
Keith Milner <kamilner@superlative.org>
Subject: [PATCH 19/41] ALSA: usb-audio: Simplify snd_usb_init_sample_rate() arguments
Date: Mon, 23 Nov 2020 09:53:25 +0100 [thread overview]
Message-ID: <20201123085347.19667-20-tiwai@suse.de> (raw)
In-Reply-To: <20201123085347.19667-1-tiwai@suse.de>
A preliminary change for the later big changes. This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/usb/clock.c | 29 +++++++++++++++--------------
sound/usb/clock.h | 3 +--
sound/usb/pcm.c | 2 --
sound/usb/quirks.c | 2 +-
sound/usb/stream.c | 2 +-
5 files changed, 18 insertions(+), 20 deletions(-)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 3298a654ce96..f25da11fce3a 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -481,15 +481,18 @@ int snd_usb_clock_find_source(struct snd_usb_audio *chip,
}
}
-static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
+static int set_sample_rate_v1(struct snd_usb_audio *chip,
struct audioformat *fmt, int rate)
{
struct usb_device *dev = chip->dev;
+ struct usb_host_interface *alts;
unsigned int ep;
unsigned char data[3];
int err, crate;
+ alts = snd_usb_get_host_interface(chip, fmt->iface, fmt->altsetting);
+ if (!alts)
+ return -EINVAL;
if (get_iface_desc(alts)->bNumEndpoints < 1)
return -EINVAL;
ep = get_endpoint(alts, 0)->bEndpointAddress;
@@ -507,7 +510,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
data, sizeof(data));
if (err < 0) {
dev_err(&dev->dev, "%d:%d: cannot set freq %d to ep %#x\n",
- iface, fmt->altsetting, rate, ep);
+ fmt->iface, fmt->altsetting, rate, ep);
return err;
}
@@ -525,7 +528,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
data, sizeof(data));
if (err < 0) {
dev_err(&dev->dev, "%d:%d: cannot get freq at ep %#x\n",
- iface, fmt->altsetting, ep);
+ fmt->iface, fmt->altsetting, ep);
chip->sample_rate_read_error++;
return 0; /* some devices don't support reading */
}
@@ -607,8 +610,7 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip,
return get_sample_rate_v2v3(chip, fmt->iface, fmt->altsetting, clock);
}
-static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
+static int set_sample_rate_v2v3(struct snd_usb_audio *chip,
struct audioformat *fmt, int rate)
{
struct usb_device *dev = chip->dev;
@@ -632,7 +634,7 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
return clock;
}
- prev_rate = get_sample_rate_v2v3(chip, iface, fmt->altsetting, clock);
+ prev_rate = get_sample_rate_v2v3(chip, fmt->iface, fmt->altsetting, clock);
if (prev_rate == rate)
goto validation;
@@ -640,7 +642,7 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
if (cur_rate < 0) {
usb_audio_err(chip,
"%d:%d: cannot set freq %d (v2/v3): err %d\n",
- iface, fmt->altsetting, rate, cur_rate);
+ fmt->iface, fmt->altsetting, rate, cur_rate);
return cur_rate;
}
@@ -657,9 +659,9 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
/* Some devices doesn't respond to sample rate changes while the
* interface is active. */
if (rate != prev_rate) {
- usb_set_interface(dev, iface, 0);
+ usb_set_interface(dev, fmt->iface, 0);
snd_usb_set_interface_quirk(chip);
- usb_set_interface(dev, iface, fmt->altsetting);
+ usb_set_interface(dev, fmt->iface, fmt->altsetting);
snd_usb_set_interface_quirk(chip);
}
@@ -670,14 +672,13 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
return 0;
}
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip,
struct audioformat *fmt, int rate)
{
switch (fmt->protocol) {
case UAC_VERSION_1:
default:
- return set_sample_rate_v1(chip, iface, alts, fmt, rate);
+ return set_sample_rate_v1(chip, fmt, rate);
case UAC_VERSION_3:
if (chip->badd_profile >= UAC3_FUNCTION_SUBCLASS_GENERIC_IO) {
@@ -688,7 +689,7 @@ int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
}
fallthrough;
case UAC_VERSION_2:
- return set_sample_rate_v2v3(chip, iface, alts, fmt, rate);
+ return set_sample_rate_v2v3(chip, fmt, rate);
}
}
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
index 97597f5a3c18..8d406ed294d6 100644
--- a/sound/usb/clock.h
+++ b/sound/usb/clock.h
@@ -2,8 +2,7 @@
#ifndef __USBAUDIO_CLOCK_H
#define __USBAUDIO_CLOCK_H
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
- struct usb_host_interface *alts,
+int snd_usb_init_sample_rate(struct snd_usb_audio *chip,
struct audioformat *fmt, int rate);
int snd_usb_clock_find_source(struct snd_usb_audio *chip,
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 2518d4c82ad5..38b461bdca86 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1017,8 +1017,6 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
ret = snd_usb_init_sample_rate(subs->stream->chip,
- subs->cur_audiofmt->iface,
- alts,
subs->cur_audiofmt,
subs->cur_rate);
if (ret < 0)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index bb4c1ae0a4a7..018c6f241ffb 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -178,7 +178,7 @@ static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
usb_set_interface(chip->dev, fp->iface, 0);
snd_usb_init_pitch(chip, fp->iface, alts, fp);
- snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
+ snd_usb_init_sample_rate(chip, fp, fp->rate_max);
return 0;
error:
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 4501e042a944..23e881985123 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -1225,7 +1225,7 @@ static int __snd_usb_parse_audio_interface(struct snd_usb_audio *chip,
/* try to set the interface... */
usb_set_interface(chip->dev, iface_no, 0);
snd_usb_init_pitch(chip, iface_no, alts, fp);
- snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max);
+ snd_usb_init_sample_rate(chip, fp, fp->rate_max);
usb_set_interface(chip->dev, iface_no, altno);
}
return 0;
--
2.16.4
next prev parent reply other threads:[~2020-11-23 9:11 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-23 8:53 [PATCH 00/41] USB audio refactoring for better implicit feedback support Takashi Iwai
2020-11-23 8:53 ` [PATCH 01/41] ALSA: usb-audio: Handle discrete rates properly in hw constraints Takashi Iwai
2020-11-23 8:53 ` [PATCH 02/41] ALSA: usb-audio: Don't call usb_set_interface() at trigger callback Takashi Iwai
2020-11-23 8:53 ` [PATCH 03/41] ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3 Takashi Iwai
2020-11-23 8:53 ` [PATCH 04/41] ALSA: usb-audio: Check implicit feedback EP generically for UAC2 Takashi Iwai
2020-11-23 8:53 ` [PATCH 05/41] ALSA: usb-audio: Add snd_usb_get_endpoint() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 06/41] ALSA: usb-audio: Set and clear sync EP link properly Takashi Iwai
2020-11-23 8:53 ` [PATCH 07/41] ALSA: usb-audio: Improve some debug prints Takashi Iwai
2020-11-23 8:53 ` [PATCH 08/41] ALSA: usb-audio: Track implicit fb sync endpoint in audioformat list Takashi Iwai
2020-11-23 8:53 ` [PATCH 09/41] ALSA: usb-audio: Move snd_usb_autoresume() call out of setup_hw_info() Takashi Iwai
2020-11-23 8:53 ` [PATCH 10/41] ALSA: usb-audio: Add hw constraint for implicit fb sync Takashi Iwai
2020-11-23 8:53 ` [PATCH 11/41] ALSA: usb-audio: Simplify hw_params rules Takashi Iwai
2020-11-23 8:53 ` [PATCH 12/41] ALSA: usb-audio: Drop debug.h Takashi Iwai
2020-11-23 8:53 ` [PATCH 13/41] ALSA: usb-audio: Avoid doubly initialization for implicit fb Takashi Iwai
2020-11-23 8:53 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase Takashi Iwai
2021-01-03 17:09 ` [PATCH 14/41] ALSA: usb-audio: Create endpoint objects at parsing phase - Pioneer DJ DJM-250MK2 stopped working František Kučera
2021-01-03 17:19 ` Takashi Iwai
2021-01-03 18:15 ` František Kučera
2021-01-05 9:29 ` Takashi Iwai
2021-01-05 13:20 ` Takashi Iwai
2021-01-05 22:27 ` František Kučera
2021-01-06 9:03 ` Takashi Iwai
2021-01-06 19:01 ` František Kučera
2021-01-07 13:30 ` Takashi Iwai
2020-11-23 8:53 ` [PATCH 15/41] ALSA: usb-audio: Drop keep_interface flag again Takashi Iwai
2020-11-23 8:53 ` [PATCH 16/41] ALSA: usb-audio: Add snd_usb_get_host_interface() helper Takashi Iwai
2020-11-23 8:53 ` [PATCH 17/41] ALSA: usb-audio: Don't set altsetting before initializing sample rate Takashi Iwai
2020-11-23 8:53 ` [PATCH 18/41] ALSA: usb-audio: Pass snd_usb_audio object to quirk functions Takashi Iwai
2020-11-23 8:53 ` Takashi Iwai [this message]
2020-11-23 8:53 ` [PATCH 20/41] ALSA: usb-audio: Simplify snd_usb_init_pitch() arguments Takashi Iwai
2020-11-23 8:53 ` [PATCH 21/41] ALSA: usb-audio: Stop both endpoints properly at error Takashi Iwai
2020-11-23 8:53 ` [PATCH 22/41] ALSA: usb-audio: Set callbacks via snd_usb_endpoint_set_callback() Takashi Iwai
2020-11-23 8:53 ` [PATCH 23/41] ALSA: usb-audio: Always set up the parameters after resume Takashi Iwai
2020-11-23 8:53 ` [PATCH 24/41] ALSA: usb-audio: Fix EP matching for continuous rates Takashi Iwai
2020-11-23 8:53 ` [PATCH 25/41] ALSA: usb-audio: Refactor endpoint management Takashi Iwai
2020-11-23 8:53 ` [PATCH 26/41] ALSA: usb-audio: Fix possible stall of implicit fb packet ring-buffer Takashi Iwai
2020-11-23 8:53 ` [PATCH 27/41] ALSA: usb-audio: Constify audioformat pointer references Takashi Iwai
2020-11-23 8:53 ` [PATCH 28/41] ALSA: usb-audio: Use atomic_t for endpoint use_count Takashi Iwai
2020-11-23 8:53 ` [PATCH 29/41] ALSA: usb-audio: Refactoring endpoint URB deactivation Takashi Iwai
2020-11-23 8:53 ` [PATCH 30/41] ALSA: usb-audio: Drop unneeded snd_usb_substream fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 31/41] ALSA: usb-audio: Unify the code for the next packet size calculation Takashi Iwai
2020-11-23 8:53 ` [PATCH 32/41] ALSA: usb-audio: Simplify rate_min/max and rates set up Takashi Iwai
2020-11-23 8:53 ` [PATCH 33/41] ALSA: usb-audio: Replace slave/master terms Takashi Iwai
2020-11-23 8:53 ` [PATCH 34/41] ALSA: usb-audio: Use unsigned char for iface and altsettings fields Takashi Iwai
2020-11-23 8:53 ` [PATCH 35/41] ALSA: usb-audio: Show sync endpoint information in proc outputs Takashi Iwai
2020-11-23 8:53 ` [PATCH 36/41] ALSA: usb-audio: Quirk for BOSS GT-001 Takashi Iwai
2020-11-23 8:53 ` [PATCH 37/41] ALSA: usb-audio: Factor out the implicit feedback quirk code Takashi Iwai
2020-11-23 8:53 ` [PATCH 38/41] ALSA: usb-audio: Add generic implicit fb parsing Takashi Iwai
2020-11-23 8:53 ` [PATCH 39/41] ALSA: usb-audio: Add implicit_fb module option Takashi Iwai
2020-11-23 9:46 ` Pavel Hofman
2020-11-23 8:53 ` [PATCH 40/41] ALSA: usb-audio: Fix quirks for other BOSS devices Takashi Iwai
2020-11-23 8:53 ` [PATCH 41/41] ALSA: usb-audio: Fix MOTU M-Series quirks Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201123085347.19667-20-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=dylan_robinson@motu.com \
--cc=kamilner@superlative.org \
--cc=matwey.kornilov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).