From: GitHub issues - opened <github@alsa-project.org>
To: alsa-devel@alsa-project.org
Subject: UCM profile for the Chromebook Yoga C630. Please add.
Date: Fri, 12 Feb 2021 07:58:10 +0100 (CET) [thread overview]
Message-ID: <20210212065810.81939F8022B@alsa1.perex.cz> (raw)
In-Reply-To: <1613113084742278099-webhooks-bot@alsa-project.org>
alsa-project/alsa-ucm-conf issue #82 was opened from neil-vonholtum:
SectionVerb {
Value {
OutputDspName "speaker_eq"
FullySpecifiedUCM "1"
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='codec1_out mo media0_in mi Switch' off"
cset "name='codec0_out mo media0_in mi Switch' off"
cset "name='Playback Digital Volume' 111"
cset "name='Playback Digital Switch' 1"
cset "name='Out DACL Mux' DAIL"
cset "name='Out DACR Mux' DAIR"
cset "name='Mixer Out FilterL DACL Switch' 1"
cset "name='Mixer Out FilterR DACR Switch' 1"
cset "name='ST Mixer Out FilterL Out FilterL Switch' 1"
cset "name='ST Mixer Out FilterR Out FilterR Switch' 1"
cset "name='Headphone Jack Switch' off"
cset "name='Headset Mic Switch' off"
cset "name='Mic Volume' 5"
cset "name='Capture Digital Volume' 111"
cset "name='Capture Digital Switch' 1"
cset "name='Mixin Volume' 10"
cset "name='Mixin Switch' 1"
cset "name='Mixer In Mic Switch' 1"
cset "name='Out DAIL Mux' ADC"
cset "name='Out DAIR Mux' ADC"
cset "name='media0_out mo codec0_in mi Switch' off"
cset "name='media0_out mo dmic01_hifi_in mi Switch' off"
cset "name='Pin5-Port0 Mux' 1"
cset "name='Pin6-Port0 Mux' 2"
cset "name='Pin7-Port0 Mux' 3"
cset "name='Gain Ramp Rate' 1"
]
DisableSequence [
]
}
SectionDevice."Speaker".0 {
Value {
PlaybackPCM "hw:kblda7219max,0"
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='codec0_out mo media0_in mi Switch' on"
cset "name='Spk Switch' on"
]
DisableSequence [
cdev "hw:kblda7219max"
cset "name='codec0_out mo media0_in mi Switch' off"
cset "name='Spk Switch' off"
]
}
SectionDevice."Headphone".0 {
Value {
PlaybackPCM "hw:kblda7219max,0"
MixerName "Headphone"
JackName "kblda7219max Headset Jack"
JackType "gpio"
JackSwitch "2"
OutputDspName ""
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='codec1_out mo media0_in mi Switch' on"
cset "name='Headphone Jack Switch' on"
cset "name='Headphone Switch' 1"
]
DisableSequence [
cdev "hw:kblda7219max"
cset "name='codec1_out mo media0_in mi Switch' off"
cset "name='Headphone Jack Switch' off"
cset "name='Headphone Switch' 0"
]
}
SectionDevice."Line Out".0 {
Value {
PlaybackPCM "hw:kblda7219max,0"
MixerName "Headphone"
JackName "kblda7219max Headset Jack"
JackType "gpio"
JackSwitch "6"
OutputDspName ""
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='codec1_out mo media0_in mi Switch' on"
cset "name='Headphone Jack Switch' on"
cset "name='Headphone Switch' 1"
]
DisableSequence [
cdev "hw:kblda7219max"
cset "name='codec1_out mo media0_in mi Switch' off"
cset "name='Headphone Jack Switch' off"
cset "name='Headphone Switch' 0"
]
}
SectionDevice."Internal Mic".0 {
Value {
CapturePCM "hw:kblda7219max,3"
CaptureChannelMap "0 1 -1 -1 -1 -1 -1 -1 -1 -1 -1"
MaxSoftwareGain "2000"
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='media0_out mo dmic01_hifi_in mi Switch' on"
]
DisableSequence [
cdev "hw:kblda7219max"
cset "name='media0_out mo dmic01_hifi_in mi Switch' off"
]
}
SectionDevice."Mic".0 {
Value {
CapturePCM "hw:kblda7219max,1"
MixerName "Headset Mic"
JackName "kblda7219max Headset Jack"
JackType "gpio"
}
EnableSequence [
cdev "hw:kblda7219max"
cset "name='Headset Mic Switch' on"
cset "name='media0_out mo codec0_in mi Switch' on"
cset "name='Mic Switch' on"
]
DisableSequence [
cdev "hw:kblda7219max"
cset "name='Headset Mic Switch' off"
cset "name='media0_out mo codec0_in mi Switch' off"
cset "name='Mic Switch' off"
]
}
SectionDevice."HDMI1".0 {
Value {
PlaybackPCM "hw:kblda7219max,4"
JackName "kblda7219max HDMI/DP, pcm=4 Jack"
JackType "gpio"
OutputDspName ""
}
EnableSequence [
]
DisableSequence [
]
}
SectionDevice."HDMI2".0 {
Value {
PlaybackPCM "hw:kblda7219max,5"
JackName "kblda7219max HDMI/DP, pcm=5 Jack"
JackType "gpio"
OutputDspName ""
}
EnableSequence [
]
DisableSequence [
]
}
SectionDevice."HDMI3".0 {
Value {
PlaybackPCM "hw:kblda7219max,6"
JackName "kblda7219max HDMI/DP, pcm=6 Jack"
JackType "gpio"
OutputDspName ""
}
EnableSequence [
]
DisableSequence [
]
}
Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/82
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
next parent reply other threads:[~2021-02-12 6:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1613113084742278099-webhooks-bot@alsa-project.org>
2021-02-12 6:58 ` GitHub issues - opened [this message]
[not found] <1613152273701877117-webhooks-bot@alsa-project.org>
2021-02-12 17:51 ` UCM profile for the Chromebook Yoga C630. Please add GitHub issues - edited
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210212065810.81939F8022B@alsa1.perex.cz \
--to=github@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).