[PATCH 3/4] ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet

[Hans de Goede <hdegoede@redhat.com>]

Add a DMI quirk for the Jumper EZpad 7 tablet, this tablet has
a jack-detect switch which reads 1/high when a jack is inserted,
rather then using the standard active-low setup which most
jack-detect switches use. All other settings are using the defaults.

Add a DMI-quirk setting the defaults + the BYT_RT5651_JD_NOT_INV
flags for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index f289ec8563a1..148b7b1bd3e8 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -435,6 +435,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = {
 					BYT_RT5651_SSP0_AIF1 |
 					BYT_RT5651_MONO_SPEAKER),
 	},
+	{
+		/* Jumper EZpad 7 */
+		.callback = byt_rt5651_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+		.driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS |
+					BYT_RT5651_IN2_MAP |
+					BYT_RT5651_JD_NOT_INV),
+	},
 	{
 		/* KIANO SlimNote 14.2 */
 		.callback = byt_rt5651_quirk_cb,
-- 
2.30.1