Re: [PATCH v3 20/28] ASoC: dt-bindings: Add Q6USB backend bindings

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Wesley Cheng <quic_wcheng@quicinc.com>,
	srinivas.kandagatla@linaro.org, mathias.nyman@intel.com,
	perex@perex.cz, broonie@kernel.org, lgirdwood@gmail.com,
	krzysztof.kozlowski+dt@linaro.org, agross@kernel.org,
	Thinh.Nguyen@synopsys.com, bgoswami@quicinc.com,
	andersson@kernel.org, robh+dt@kernel.org,
	gregkh@linuxfoundation.org, tiwai@suse.com
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
	linux-usb@vger.kernel.org, quic_jackp@quicinc.com,
	quic_plai@quicinc.com
Subject: Re: [PATCH v3 20/28] ASoC: dt-bindings: Add Q6USB backend bindings
Date: Fri, 10 Mar 2023 09:54:15 +0100	[thread overview]
Message-ID: <499ee440-0c52-bb21-d04d-086aebc0cf4e@linaro.org> (raw)
In-Reply-To: <20230308235751.495-21-quic_wcheng@quicinc.com>

On 09/03/2023 00:57, Wesley Cheng wrote:
> Add a dt-binding to describe the definition of enabling the Q6 USB backend
> device for audio offloading.  The node carries information, which is passed
> along to the QC USB SND class driver counterpart.  These parameters will be
> utilized during QMI stream enable requests.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>  .../bindings/sound/qcom,q6usb-dais.yaml       | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml
> new file mode 100644
> index 000000000000..8477abc511dd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb-dais.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,q6usb-dais.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm ASoC USB backend DAI
> +
> +maintainers:
> +  - Wesley Cheng <quic_wcheng@quicinc.com>
> +
> +description:
> +  The Q6USB backend is a supported AFE port on the Q6DSP. This backend
> +  driver will communicate the required settings to the QC USB SND class

What does the "driver" mean? Linux driver? Then drop and focus on
hardware/Q6DSP.

> +  driver for properly enabling the audio stream.  Parameters defined
> +  under this node will carry settings, which will be passed along during
> +  the QMI stream enable request.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,q6usb-dais

Can q6usb mean anything else? Why "-dais" suffix?

> +
> +  iommus:
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 1
> +
> +  qcom,usb-audio-intr-num:
> +    description:
> +      Desired XHCI interrupter number to use.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Why this should be configurable per board or SoC? It's the first use in
DT and in the same time sounds generic...

> +
> +required:
> +  - compatible
> +  - "#sound-dai-cells"
> +  - qcom,usb-audio-intr-num
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    dais {
> +      compatible = "qcom,q6usb-dais";
> +      #sound-dai-cells = <1>;
> +      iommus = <&apps_smmu 0x180f 0x0>;
> +      qcom,usb-audio-intr-num = <2>;
> +    };

Best regards,
Krzysztof