From: Thorsten Leemhuis <email@example.com> To: firstname.lastname@example.org, Takashi Iwai <email@example.com> Cc: firstname.lastname@example.org, "email@example.com" <firstname.lastname@example.org> Subject: Re: Is it a regression? 5.15.5: No sound with speaker-test. 5.12.13: it works. Date: Fri, 10 Dec 2021 12:31:34 +0100 [thread overview] Message-ID: <email@example.com> (raw) In-Reply-To: <E1muw55-000WNp-Ui@mx1.net9.ga> On 08.12.21 13:29, firstname.lastname@example.org wrote: > Takashi Iwai <email@example.com> wrote: >> On Mon, 29 Nov 2021 14:03:05 +0100, >> firstname.lastname@example.org wrote: >>> >>> The following looks to me a regression in the linux sound driver. >>> alsa-info.sh output is included at the bottom of this message. There are 2 >>> outputs. An output with a 5.12.13 kernel. The other output is with a >>> 5.15.5. They were obtained with the same PC. With 5.12.13, the >>> speaker-test program works as expected. There is no sound when the >>> speaker-test program is ran with 5.15.5. >>> 5.15.5 has >>> options snd-hda-intel id=PCH index=0 >>> options snd-hda-intel id=HDMI index=1 >>> , which 5.12.13 does not have. >> >> Both those lines conflict with each other, so they make no sense and >> are already incorrect. >> >> If you want to swap the card indices inevitably needed, just pass a >> single option line below instead. >> >> options snd-hda-intel index=1,0 > > I have modified my setting as you suggested. > > speaker-test is now producing sound with both 5.12.13, and 5.15.5. Which is > actualy 5.15.6, not 5.15.5, by now. It got upgraded a few days ago. I don't > know what is the exact change that made it working. I have done several > other chnages in the last couple of days. > [...] Sounds to me like "there might still be a small problem lurking there, but things are working now for the reporter and maybe the problem was caused by something else anyway", so I guess I'll remove in from the regression tracking. #regzbot invalid: things are working again, what exactly helped remains unkown #regzbot ignore-activity Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression.
next prev parent reply other threads:[~2021-12-10 11:32 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-29 13:03 u34 2021-12-07 9:04 ` Thorsten Leemhuis 2021-12-07 9:16 ` Takashi Iwai 2021-12-08 12:29 ` u34 2021-12-10 11:31 ` Thorsten Leemhuis [this message] 2021-12-11 18:34 ` Paxton Evans -- strict thread matches above, loose matches on Subject: below -- 2021-11-27 2:35 u34
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --subject='Re: Is it a regression? 5.15.5: No sound with speaker-test. 5.12.13: it works.' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).