Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Shengjiu Wang <shengjiu.wang@gmail.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Linux-ALSA <alsa-devel@alsa-project.org>,
	Timur Tabi <timur@kernel.org>, Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linuxppc-dev@lists.ozlabs.org,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] ASoC: fsl-asoc-card: Remove fsl_asoc_card_set_bias_level function
Date: Sun, 2 Aug 2020 10:22:35 +0800
Message-ID: <CAA+D8AMM90bt_WbPCny6C=R=dv6gXXh49p59yng2vH7DDuD2PQ@mail.gmail.com> (raw)
In-Reply-To: <20200801075954.GA19629@Asurada-Nvidia>

On Sat, Aug 1, 2020 at 4:01 PM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> Hi,
>
> Having two nits and one question, inline:
>
> On Thu, Jul 30, 2020 at 05:47:02PM +0800, Shengjiu Wang wrote:
> > @@ -182,6 +180,69 @@ static int fsl_asoc_card_hw_params(struct snd_pcm_substream *substream,
> >                                              cpu_priv->slot_width);
> >               if (ret && ret != -ENOTSUPP) {
> >                       dev_err(dev, "failed to set TDM slot for cpu dai\n");
> > +                     goto out;
> > +             }
> > +     }
> > +
> > +     /* Specific configuration for PLL */
> > +     if (codec_priv->pll_id && codec_priv->fll_id) {
> > +             if (priv->sample_format == SNDRV_PCM_FORMAT_S24_LE)
> > +                     pll_out = priv->sample_rate * 384;
> > +             else
> > +                     pll_out = priv->sample_rate * 256;
> > +
> > +             ret = snd_soc_dai_set_pll(asoc_rtd_to_codec(rtd, 0),
> > +                                       codec_priv->pll_id,
> > +                                       codec_priv->mclk_id,
> > +                                       codec_priv->mclk_freq, pll_out);
> > +             if (ret) {
> > +                     dev_err(dev, "failed to start FLL: %d\n", ret);
> > +                     goto out;
> > +             }
> > +
> > +             ret = snd_soc_dai_set_sysclk(asoc_rtd_to_codec(rtd, 0),
> > +                                          codec_priv->fll_id,
> > +                                          pll_out, SND_SOC_CLOCK_IN);
>
> Just came into my mind: do we need some protection here to prevent
> PLL/SYSCLK reconfiguration if TX/RX end up with different values?
>
Sorry,  not really catching your point. could you please elaborate?
Why do TX/RX end up with different values?

best regards
wang shengiu
> > +     return 0;
> > +
> > +out:
> > +     priv->streams &= ~BIT(substream->stream);
> > +     return ret;
>
> Rather than "out:" which doesn't explicitly indicate an error-out,
> "fail:" would be better, following what we used in probe().
>
> > +static int fsl_asoc_card_hw_free(struct snd_pcm_substream *substream)
> > +{
> > +     struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > +     struct fsl_asoc_card_priv *priv = snd_soc_card_get_drvdata(rtd->card);
> > +     struct codec_priv *codec_priv = &priv->codec_priv;
> > +     struct device *dev = rtd->card->dev;
> > +     int ret;
> > +
> > +     priv->streams &= ~BIT(substream->stream);
> > +
>
> > +     if (!priv->streams && codec_priv->pll_id &&
> > +         codec_priv->fll_id) {
>
> This now can fit into single line :)

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  9:47 Shengjiu Wang
2020-08-01  7:59 ` Nicolin Chen
2020-08-02  2:22   ` Shengjiu Wang [this message]
2020-08-02  6:43     ` Nicolin Chen
2020-08-03  1:28       ` Shengjiu Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAA+D8AMM90bt_WbPCny6C=R=dv6gXXh49p59yng2vH7DDuD2PQ@mail.gmail.com' \
    --to=shengjiu.wang@gmail.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=shengjiu.wang@nxp.com \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git