alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Add documentation and machine driver for SC7180 sound card
@ 2020-07-31  8:40 Cheng-Yi Chiang
  2020-07-31  8:40 ` [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
  2020-07-31  8:40 ` [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
  0 siblings, 2 replies; 8+ messages in thread
From: Cheng-Yi Chiang @ 2020-07-31  8:40 UTC (permalink / raw)
  To: linux-kernel
  Cc: Taniya Das, devicetree, tzungbi, Banajit Goswami,
	Stephan Gerhold, linux-arm-msm, Patrick Lai, Takashi Iwai,
	Liam Girdwood, Rob Herring, Bjorn Andersson, alsa-devel,
	Andy Gross, Rohit kumar, Mark Brown, dianders, Srini Kandagatla,
	dgreid, linux-arm-kernel, Cheng-Yi Chiang

Note:
- The machine driver patch depends on LPASS patch series so it is not ready to be merged now.
  ASoC: qcom: Add support for SC7180 lpass variant https://patchwork.kernel.org/cover/11678133/
- The machine driver patch is made by the collaboration of
  Cheng-Yi Chiang <cychiang@chromium.org>
  Rohit kumar <rohitkr@codeaurora.org>
  Ajit Pandey <ajitp@codeaurora.org>
  But Ajit has left codeaurora.

Changes from v1 to v2:
- Ducumentation: Addressed all suggestions from Doug.
- Machine driver:
  - Fix comment style for license.
  - Sort includes.
  - Remove sc7180_snd_hw_params.
  - Remove sc7180_dai_init and use aux device instead for headset jack registration.
  - Statically define format for Primary MI2S.
  - Atomic is not a concern because there is mutex in card to make sure
    startup and shutdown happen sequentially.
  - Fix missing return -EINVAL in startup.
  - Use static sound card.
  - Use devm_kzalloc to avoid kfree.

Changes from v2 to v3:
- Ducumentation: Addressed suggestions from Srini.
- Machine driver:
  - Reuse qcom_snd_parse_of to parse properties.
  - Remove playback-only and capture-only.
  - Misc fixes to address comments.

Thanks for the review!
Ajit Pandey (1):
  ASoC: qcom: sc7180: Add machine driver for sound card registration

Cheng-Yi Chiang (1):
  ASoC: qcom: dt-bindings: Add sc7180 machine bindings

 .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++
 sound/soc/qcom/Kconfig                        |  12 +
 sound/soc/qcom/Makefile                       |   2 +
 sound/soc/qcom/sc7180.c                       | 244 ++++++++++++++++++
 4 files changed, 371 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
 create mode 100644 sound/soc/qcom/sc7180.c

-- 
2.28.0.163.g6104cc2f0b6-goog


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
  2020-07-31  8:40 [PATCH v3 0/2] Add documentation and machine driver for SC7180 sound card Cheng-Yi Chiang
@ 2020-07-31  8:40 ` Cheng-Yi Chiang
  2020-07-31 18:27   ` Rob Herring
  2020-07-31 18:32   ` Rob Herring
  2020-07-31  8:40 ` [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
  1 sibling, 2 replies; 8+ messages in thread
From: Cheng-Yi Chiang @ 2020-07-31  8:40 UTC (permalink / raw)
  To: linux-kernel
  Cc: Taniya Das, devicetree, tzungbi, Banajit Goswami,
	Stephan Gerhold, linux-arm-msm, Patrick Lai, Takashi Iwai,
	Liam Girdwood, Rob Herring, Bjorn Andersson, alsa-devel,
	Andy Gross, Rohit kumar, Mark Brown, dianders, Srini Kandagatla,
	dgreid, linux-arm-kernel, Cheng-Yi Chiang

Add devicetree bindings documentation file for sc7180 sound card.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---
 .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
new file mode 100644
index 000000000000..ce8a5a2d9df9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. SC7180 ASoC sound card driver
+
+maintainers:
+  - Rohit kumar <rohitkr@codeaurora.org>
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description:
+  This binding describes the SC7180 sound card which uses LPASS for audio.
+
+definitions:
+
+  dai:
+    type: object
+    properties:
+      sound-dai:
+        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description: phandle array of the codec or CPU DAI
+
+    required:
+      - sound-dai
+
+properties:
+  compatible:
+    contains:
+      const: qcom,sc7180-sndcard
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  aux-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of the codec for headset detection
+
+patternProperties:
+  "^dai-link(@[0-9]+)?$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      cpu:
+        $ref: "#/definitions/dai"
+
+      codec:
+        $ref: "#/definitions/dai"
+
+    required:
+      - link-name
+      - cpu
+      - codec
+
+    additionalProperties: false
+
+examples:
+
+  - |
+    sound {
+        compatible = "qcom,sc7180-sndcard";
+        model = "sc7180-snd-card";
+
+        audio-routing =
+                    "Headphone Jack", "HPOL",
+                    "Headphone Jack", "HPOR";
+
+        aux-dev = <&alc5682>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dai-link@0 {
+            link-name = "MultiMedia0";
+            cpu {
+                sound-dai = <&lpass_cpu 0>;
+            };
+
+            codec {
+                sound-dai = <&alc5682 0>;
+            };
+        };
+
+        dai-link@1 {
+            link-name = "MultiMedia1";
+            cpu {
+                sound-dai = <&lpass_cpu 1>;
+            };
+
+            codec {
+                sound-dai = <&max98357a>;
+            };
+        };
+    };
-- 
2.28.0.163.g6104cc2f0b6-goog


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
  2020-07-31  8:40 [PATCH v3 0/2] Add documentation and machine driver for SC7180 sound card Cheng-Yi Chiang
  2020-07-31  8:40 ` [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
@ 2020-07-31  8:40 ` Cheng-Yi Chiang
  2020-07-31  9:17   ` Tzung-Bi Shih
  1 sibling, 1 reply; 8+ messages in thread
From: Cheng-Yi Chiang @ 2020-07-31  8:40 UTC (permalink / raw)
  To: linux-kernel
  Cc: Taniya Das, alsa-devel, Banajit Goswami, Liam Girdwood,
	Rohit kumar, Cheng-Yi Chiang, Patrick Lai, Ajit Pandey,
	Andy Gross, dgreid, devicetree, tzungbi, Stephan Gerhold,
	linux-arm-msm, Rob Herring, Bjorn Andersson, linux-arm-kernel,
	dianders, Takashi Iwai, Mark Brown, Srini Kandagatla

From: Ajit Pandey <ajitp@codeaurora.org>

Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---
 sound/soc/qcom/Kconfig  |  12 ++
 sound/soc/qcom/Makefile |   2 +
 sound/soc/qcom/sc7180.c | 244 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 sound/soc/qcom/sc7180.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 5d6b2466a2f2..54aa2ede229c 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -110,3 +110,15 @@ config SND_SOC_SDM845
 	  To add support for audio on Qualcomm Technologies Inc.
 	  SDM845 SoC-based systems.
 	  Say Y if you want to use audio device on this SoCs.
+
+config SND_SOC_SC7180
+	tristate "SoC Machine driver for SC7180 boards"
+	depends on SND_SOC_QCOM
+	select SND_SOC_QCOM_COMMON
+	select SND_SOC_LPASS_SC7180
+	select SND_SOC_MAX98357A
+	select SND_SOC_RT5682
+	help
+	 To add support for audio on Qualcomm Technologies Inc.
+	 SC7180 SoC-based systems.
+	 Say Y if you want to use audio device on this SoCs.
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 41b2c7a23a4d..3f6275d90526 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -15,12 +15,14 @@ snd-soc-storm-objs := storm.o
 snd-soc-apq8016-sbc-objs := apq8016_sbc.o
 snd-soc-apq8096-objs := apq8096.o
 snd-soc-sdm845-objs := sdm845.o
+snd-soc-sc7180-objs := sc7180.o
 snd-soc-qcom-common-objs := common.o
 
 obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
 obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
 obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
 obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
+obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
 obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
 
 #DSP lib
diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
new file mode 100644
index 000000000000..7849376f63ba
--- /dev/null
+++ b/sound/soc/qcom/sc7180.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+//
+// sc7180.c -- ALSA SoC Machine driver for SC7180
+
+#include <dt-bindings/sound/sc7180-lpass.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <uapi/linux/input-event-codes.h>
+
+#include "../codecs/rt5682.h"
+#include "common.h"
+#include "lpass.h"
+
+#define DEFAULT_SAMPLE_RATE_48K		48000
+#define DEFAULT_MCLK_RATE		19200000
+#define RT5682_PLL1_FREQ (48000 * 512)
+
+struct sc7180_snd_data {
+	struct snd_soc_jack jack;
+	u32 pri_mi2s_clk_count;
+};
+
+static void sc7180_jack_free(struct snd_jack *jack)
+{
+	struct snd_soc_component *component = jack->private_data;
+
+	snd_soc_component_set_jack(component, NULL, NULL);
+}
+
+static int sc7180_headset_init(struct snd_soc_component *component)
+{
+	struct snd_soc_card *card = component->card;
+	struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+	struct snd_jack *jack;
+	int rval;
+
+	rval = snd_soc_card_jack_new(
+			card, "Headset Jack",
+			SND_JACK_HEADSET |
+			SND_JACK_HEADPHONE |
+			SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+			SND_JACK_BTN_2 | SND_JACK_BTN_3,
+			&pdata->jack, NULL, 0);
+
+	if (rval < 0) {
+		dev_err(card->dev, "Unable to add Headset Jack\n");
+		return rval;
+	}
+
+	jack = pdata->jack.jack;
+
+	snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+	snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+	snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+	snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+	jack->private_data = component;
+	jack->private_free = sc7180_jack_free;
+
+	rval = snd_soc_component_set_jack(component,
+					  &pdata->jack, NULL);
+	if (rval != 0 && rval != -EOPNOTSUPP) {
+		dev_warn(card->dev, "Failed to set jack: %d\n", rval);
+		return rval;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_aux_dev sc7180_headset_dev = {
+	.dlc = COMP_EMPTY(),
+	.init = sc7180_headset_init,
+};
+
+static int sc7180_snd_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	switch (cpu_dai->id) {
+	case MI2S_PRIMARY:
+		if (++data->pri_mi2s_clk_count == 1) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+					       LPASS_MCLK0,
+					       DEFAULT_MCLK_RATE,
+					       SNDRV_PCM_STREAM_PLAYBACK);
+		}
+
+		snd_soc_dai_set_fmt(codec_dai,
+				    SND_SOC_DAIFMT_CBS_CFS |
+				    SND_SOC_DAIFMT_NB_NF |
+				    SND_SOC_DAIFMT_I2S);
+
+		/* Configure PLL1 for codec */
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
+					  DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
+		if (ret) {
+			dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+			return ret;
+		}
+
+		/* Configure sysclk for codec */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
+					     RT5682_PLL1_FREQ,
+					     SND_SOC_CLOCK_IN);
+		if (ret)
+			dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
+				ret);
+
+		break;
+	case MI2S_SECONDARY:
+		break;
+	default:
+		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+			cpu_dai->id);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_card *card = rtd->card;
+	struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+	switch (cpu_dai->id) {
+	case MI2S_PRIMARY:
+		if (--data->pri_mi2s_clk_count == 0) {
+			snd_soc_dai_set_sysclk(cpu_dai,
+					       LPASS_MCLK0,
+					       0,
+					       SNDRV_PCM_STREAM_PLAYBACK);
+		}
+		break;
+	case MI2S_SECONDARY:
+		break;
+	default:
+		dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+			cpu_dai->id);
+		break;
+	}
+}
+
+static const struct snd_soc_ops sc7180_ops = {
+	.startup = sc7180_snd_startup,
+	.shutdown = sc7180_snd_shutdown,
+};
+
+static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static struct snd_soc_card sc7180_card = {
+	.owner = THIS_MODULE,
+	.aux_dev = &sc7180_headset_dev,
+	.num_aux_devs = 1,
+	.dapm_widgets = sc7180_snd_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
+};
+
+static int sc7180_parse_aux_of(struct device *dev)
+{
+	sc7180_headset_dev.dlc.of_node = of_parse_phandle(
+			dev->of_node, "aux-dev", 0);
+
+	if (!sc7180_headset_dev.dlc.of_node)
+		return -EINVAL;
+	return 0;
+}
+
+static void sc7180_add_ops(struct snd_soc_card *card)
+{
+	struct snd_soc_dai_link *link;
+	int i;
+
+	for_each_card_prelinks(card, i, link)
+		link->ops = &sc7180_ops;
+}
+
+static int sc7180_snd_platform_probe(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = &sc7180_card;
+	struct sc7180_snd_data *data;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	/* Allocate the private data */
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	card->dev = dev;
+
+	ret = qcom_snd_parse_of(card);
+	if (ret) {
+		dev_err(dev, "Error parsing OF data\n");
+		return ret;
+	}
+
+	snd_soc_card_set_drvdata(card, data);
+
+	sc7180_add_ops(card);
+
+	ret = sc7180_parse_aux_of(dev);
+	if (ret) {
+		dev_err(dev, "Failed to parse OF for jack device\n");
+		return ret;
+	}
+
+	return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id sc7180_snd_device_id[]  = {
+	{ .compatible = "qcom,sc7180-sndcard" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
+
+static struct platform_driver sc7180_snd_driver = {
+	.probe = sc7180_snd_platform_probe,
+	.driver = {
+		.name = "msm-snd-sc7180",
+		.of_match_table = sc7180_snd_device_id,
+	},
+};
+module_platform_driver(sc7180_snd_driver);
+
+MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.28.0.163.g6104cc2f0b6-goog


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
  2020-07-31  8:40 ` [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
@ 2020-07-31  9:17   ` Tzung-Bi Shih
  0 siblings, 0 replies; 8+ messages in thread
From: Tzung-Bi Shih @ 2020-07-31  9:17 UTC (permalink / raw)
  To: Cheng-Yi Chiang
  Cc: Taniya Das, ALSA development, Banajit Goswami, Takashi Iwai,
	Rohit kumar, Patrick Lai, Ajit Pandey, Andy Gross, dgreid,
	devicetree, Tzung-Bi Shih, Stephan Gerhold, linux-arm-msm,
	Rob Herring, Bjorn Andersson, linux-arm-kernel, Douglas Anderson,
	Liam Girdwood, Linux Kernel Mailing List, Mark Brown,
	Srini Kandagatla

On Fri, Jul 31, 2020 at 4:41 PM Cheng-Yi Chiang <cychiang@chromium.org> wrote:
>
> From: Ajit Pandey <ajitp@codeaurora.org>
>
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
>
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>

LGTM.

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
  2020-07-31  8:40 ` [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
@ 2020-07-31 18:27   ` Rob Herring
  2020-08-03  8:24     ` Cheng-yi Chiang
  2020-07-31 18:32   ` Rob Herring
  1 sibling, 1 reply; 8+ messages in thread
From: Rob Herring @ 2020-07-31 18:27 UTC (permalink / raw)
  To: Cheng-Yi Chiang
  Cc: Taniya Das, devicetree, alsa-devel, Banajit Goswami,
	linux-kernel, Stephan Gerhold, Liam Girdwood, linux-arm-msm,
	Patrick Lai, Takashi Iwai, dianders, tzungbi, Bjorn Andersson,
	Rob Herring, Andy Gross, Srini Kandagatla, Mark Brown,
	Rohit kumar, dgreid, linux-arm-kernel

On Fri, 31 Jul 2020 16:40:22 +0800, Cheng-Yi Chiang wrote:
> Add devicetree bindings documentation file for sc7180 sound card.
> 
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> ---
>  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:32.24-41.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:43.24-52.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@1: node has a unit name, but no reg or ranges property


See https://patchwork.ozlabs.org/patch/1339316

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
  2020-07-31  8:40 ` [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
  2020-07-31 18:27   ` Rob Herring
@ 2020-07-31 18:32   ` Rob Herring
  2020-08-03  8:40     ` Cheng-yi Chiang
  1 sibling, 1 reply; 8+ messages in thread
From: Rob Herring @ 2020-07-31 18:32 UTC (permalink / raw)
  To: Cheng-Yi Chiang
  Cc: Taniya Das, devicetree, alsa-devel, Banajit Goswami,
	Stephan Gerhold, Liam Girdwood, linux-arm-msm, Patrick Lai,
	Takashi Iwai, linux-kernel, tzungbi, Bjorn Andersson, Mark Brown,
	Rohit kumar, Andy Gross, dianders, Srini Kandagatla, dgreid,
	linux-arm-kernel

On Fri, Jul 31, 2020 at 04:40:22PM +0800, Cheng-Yi Chiang wrote:
> Add devicetree bindings documentation file for sc7180 sound card.
> 
> Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> ---
>  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> new file mode 100644
> index 000000000000..ce8a5a2d9df9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,sc7180.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc. SC7180 ASoC sound card driver
> +
> +maintainers:
> +  - Rohit kumar <rohitkr@codeaurora.org>
> +  - Cheng-Yi Chiang <cychiang@chromium.org>
> +
> +description:
> +  This binding describes the SC7180 sound card which uses LPASS for audio.
> +
> +definitions:

Please don't use 'definitions'. Either just duplicate it or you can do 
'patternProperties'.

> +
> +  dai:
> +    type: object
> +    properties:
> +      sound-dai:
> +        maxItems: 1
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        description: phandle array of the codec or CPU DAI

This is a common property. You can assume we have a common schema 
definition for it. IOW, 'sound-dai: true' is enough as it's always a 
single phandle+args.

> +
> +    required:
> +      - sound-dai
> +
> +properties:
> +  compatible:
> +    contains:
> +      const: qcom,sc7180-sndcard
> +
> +  audio-routing:
> +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +    description:
> +      A list of the connections between audio components. Each entry is a
> +      pair of strings, the first being the connection's sink, the second
> +      being the connection's source.
> +
> +  model:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: User specified audio sound card name
> +
> +  aux-dev:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle of the codec for headset detection
> +
> +patternProperties:
> +  "^dai-link(@[0-9]+)?$":
> +    description:
> +      Each subnode represents a dai link. Subnodes of each dai links would be
> +      cpu/codec dais.
> +
> +    type: object
> +
> +    properties:
> +      link-name:
> +        description: Indicates dai-link name and PCM stream name.
> +        $ref: /schemas/types.yaml#/definitions/string
> +        maxItems: 1
> +
> +      cpu:
> +        $ref: "#/definitions/dai"
> +
> +      codec:
> +        $ref: "#/definitions/dai"
> +
> +    required:
> +      - link-name
> +      - cpu
> +      - codec
> +
> +    additionalProperties: false
> +
> +examples:
> +
> +  - |
> +    sound {
> +        compatible = "qcom,sc7180-sndcard";
> +        model = "sc7180-snd-card";
> +
> +        audio-routing =
> +                    "Headphone Jack", "HPOL",
> +                    "Headphone Jack", "HPOR";
> +
> +        aux-dev = <&alc5682>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        dai-link@0 {
> +            link-name = "MultiMedia0";
> +            cpu {
> +                sound-dai = <&lpass_cpu 0>;
> +            };
> +
> +            codec {
> +                sound-dai = <&alc5682 0>;
> +            };
> +        };
> +
> +        dai-link@1 {
> +            link-name = "MultiMedia1";
> +            cpu {
> +                sound-dai = <&lpass_cpu 1>;
> +            };
> +
> +            codec {
> +                sound-dai = <&max98357a>;
> +            };
> +        };
> +    };
> -- 
> 2.28.0.163.g6104cc2f0b6-goog
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
  2020-07-31 18:27   ` Rob Herring
@ 2020-08-03  8:24     ` Cheng-yi Chiang
  0 siblings, 0 replies; 8+ messages in thread
From: Cheng-yi Chiang @ 2020-08-03  8:24 UTC (permalink / raw)
  To: Rob Herring
  Cc: Taniya Das,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
	Banajit Goswami, linux-kernel, Stephan Gerhold, Liam Girdwood,
	linux-arm-msm, Patrick Lai, Takashi Iwai, Doug Anderson,
	Tzung-Bi Shih, Bjorn Andersson, Rob Herring, Andy Gross,
	Srini Kandagatla, Mark Brown, Rohit kumar, Dylan Reid, Linux ARM

On Sat, Aug 1, 2020 at 2:27 AM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, 31 Jul 2020 16:40:22 +0800, Cheng-Yi Chiang wrote:
> > Add devicetree bindings documentation file for sc7180 sound card.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> > ---
> >  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> >
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:32.24-41.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@0: node has a unit name, but no reg or ranges property
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:43.24-52.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link@1: node has a unit name, but no reg or ranges property
>
>
> See https://patchwork.ozlabs.org/patch/1339316
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
>
I have passed this in v2 patch, but removed reg in v3 patch since it
is not used.
In v4, I have added back reg = <0> and reg = <1> into the example, and
reg property into schema to fix this error.
Since reg property is not used in the driver, I am not sure whether I
should add it in the schema.
Please let me know which is preferred. Thanks!

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings
  2020-07-31 18:32   ` Rob Herring
@ 2020-08-03  8:40     ` Cheng-yi Chiang
  0 siblings, 0 replies; 8+ messages in thread
From: Cheng-yi Chiang @ 2020-08-03  8:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: Taniya Das,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
	Banajit Goswami, Stephan Gerhold, Liam Girdwood, linux-arm-msm,
	Patrick Lai, Takashi Iwai, linux-kernel, Tzung-Bi Shih,
	Bjorn Andersson, Mark Brown, Rohit kumar, Andy Gross,
	Doug Anderson, Srini Kandagatla, Dylan Reid, Linux ARM

On Sat, Aug 1, 2020 at 2:32 AM Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Jul 31, 2020 at 04:40:22PM +0800, Cheng-Yi Chiang wrote:
> > Add devicetree bindings documentation file for sc7180 sound card.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
> > ---
> >  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> > new file mode 100644
> > index 000000000000..ce8a5a2d9df9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> > @@ -0,0 +1,113 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/qcom,sc7180.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies Inc. SC7180 ASoC sound card driver
> > +
> > +maintainers:
> > +  - Rohit kumar <rohitkr@codeaurora.org>
> > +  - Cheng-Yi Chiang <cychiang@chromium.org>
> > +
> > +description:
> > +  This binding describes the SC7180 sound card which uses LPASS for audio.
> > +
> > +definitions:
>
> Please don't use 'definitions'. Either just duplicate it or you can do
> 'patternProperties'.
>
Removed dai definition in v4.
> > +
> > +  dai:
> > +    type: object
> > +    properties:
> > +      sound-dai:
> > +        maxItems: 1
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        description: phandle array of the codec or CPU DAI
>
> This is a common property. You can assume we have a common schema
> definition for it. IOW, 'sound-dai: true' is enough as it's always a
> single phandle+args.
>
In the examples I found,
Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml,
Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
use:

      sound-dai:
        $ref: /schemas/types.yaml#/definitions/phandle
        description: phandle of the CPU DAI

Documentation/devicetree/bindings/sound/simple-card.yaml
just use

      sound-dai:
        maxItems: 1

In v4, I used 'sound-dai: true' as suggested.

But I am a bit confused about assuming there is a common schema
definition for it.
I checked the code at https://github.com/devicetree-org/dt-schema but
did not found the definition for it.
Did I miss something here ?

Thanks for the help!

> > +
> > +    required:
> > +      - sound-dai
> > +
> > +properties:
> > +  compatible:
> > +    contains:
> > +      const: qcom,sc7180-sndcard
> > +
> > +  audio-routing:
> > +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> > +    description:
> > +      A list of the connections between audio components. Each entry is a
> > +      pair of strings, the first being the connection's sink, the second
> > +      being the connection's source.
> > +
> > +  model:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: User specified audio sound card name
> > +
> > +  aux-dev:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: phandle of the codec for headset detection
> > +
> > +patternProperties:
> > +  "^dai-link(@[0-9]+)?$":
> > +    description:
> > +      Each subnode represents a dai link. Subnodes of each dai links would be
> > +      cpu/codec dais.
> > +
> > +    type: object
> > +
> > +    properties:
> > +      link-name:
> > +        description: Indicates dai-link name and PCM stream name.
> > +        $ref: /schemas/types.yaml#/definitions/string
> > +        maxItems: 1
> > +
> > +      cpu:
> > +        $ref: "#/definitions/dai"
> > +
> > +      codec:
> > +        $ref: "#/definitions/dai"
> > +
> > +    required:
> > +      - link-name
> > +      - cpu
> > +      - codec
> > +
> > +    additionalProperties: false
> > +
> > +examples:
> > +
> > +  - |
> > +    sound {
> > +        compatible = "qcom,sc7180-sndcard";
> > +        model = "sc7180-snd-card";
> > +
> > +        audio-routing =
> > +                    "Headphone Jack", "HPOL",
> > +                    "Headphone Jack", "HPOR";
> > +
> > +        aux-dev = <&alc5682>;
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        dai-link@0 {
> > +            link-name = "MultiMedia0";
> > +            cpu {
> > +                sound-dai = <&lpass_cpu 0>;
> > +            };
> > +
> > +            codec {
> > +                sound-dai = <&alc5682 0>;
> > +            };
> > +        };
> > +
> > +        dai-link@1 {
> > +            link-name = "MultiMedia1";
> > +            cpu {
> > +                sound-dai = <&lpass_cpu 1>;
> > +            };
> > +
> > +            codec {
> > +                sound-dai = <&max98357a>;
> > +            };
> > +        };
> > +    };
> > --
> > 2.28.0.163.g6104cc2f0b6-goog
> >

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2020-08-03  8:41 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-31  8:40 [PATCH v3 0/2] Add documentation and machine driver for SC7180 sound card Cheng-Yi Chiang
2020-07-31  8:40 ` [PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings Cheng-Yi Chiang
2020-07-31 18:27   ` Rob Herring
2020-08-03  8:24     ` Cheng-yi Chiang
2020-07-31 18:32   ` Rob Herring
2020-08-03  8:40     ` Cheng-yi Chiang
2020-07-31  8:40 ` [PATCH v3 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration Cheng-Yi Chiang
2020-07-31  9:17   ` Tzung-Bi Shih

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).