alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	 Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: devicetree <devicetree@vger.kernel.org>,
	Linux-ALSA <alsa-devel@alsa-project.org>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	Marcus Cooper <codekipper@gmail.com>
Subject: Re: [PATCH 4/7] ASoC: sun4i-i2s: Set sign extend sample
Date: Sat, 18 Apr 2020 23:30:16 +0200	[thread overview]
Message-ID: <CAJiuCcdH0=wdKfmAquNfv=0AT_S8qx0Nasbb4m6itWXjUyw8_g@mail.gmail.com> (raw)
In-Reply-To: <20200418143923.19608-5-peron.clem@gmail.com>

Hi,

On Sat, 18 Apr 2020 at 16:39, Clément Péron <peron.clem@gmail.com> wrote:
>
> From: Marcus Cooper <codekipper@gmail.com>
>
> On the newer SoCs such as the H3 and A64 this is set by default
> to transfer a 0 after each sample in each slot. However the A10
> and A20 SoCs that this driver was developed on had a default
> setting where it padded the audio gain with zeros.
>
> This isn't a problem whilst we have only support for 16bit audio
> but with larger sample resolution rates in the pipeline then SEXT
> bits should be cleared so that they also pad at the LSB. Without
> this the audio gets distorted.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index a23c9f2a3f8c..e5f00be8cdcf 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -663,6 +663,12 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
>         }
>         regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
>                            SUN4I_I2S_CTRL_MODE_MASK, val);
> +
> +       /* Set sign extension to pad out LSB with 0 */
> +       regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> +                          SUN4I_I2S_FMT1_REG_SEXT_MASK,
> +                          SUN4I_I2S_FMT1_REG_SEXT(0));

My apologies, I made a mistake during the rebase between old Marcus
Cooper patches and new one.
And sadly I lost the defines required here without noticing it.

Will send a v2.

Sorry for that,
Clement

> +
>         return 0;
>  }
>
> @@ -765,6 +771,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
>                            SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
>                            val);
>
> +       /* Set sign extension to pad out LSB with 0 */
> +       regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> +                          SUN8I_I2S_FMT1_REG_SEXT_MASK,
> +                          SUN8I_I2S_FMT1_REG_SEXT(0));
> +
>         return 0;
>  }
>
> @@ -867,6 +878,11 @@ static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
>                            SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
>                            val);
>
> +       /* Set sign extension to pad out LSB with 0 */
> +       regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> +                          SUN8I_I2S_FMT1_REG_SEXT_MASK,
> +                          SUN8I_I2S_FMT1_REG_SEXT(0));
> +
>         return 0;
>  }
>
> --
> 2.20.1
>

  reply	other threads:[~2020-04-18 21:31 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-18 14:39 [PATCH 0/7] Add H6 I2S support Clément Péron
2020-04-18 14:39 ` [PATCH 1/7] ASoC: sun4i-i2s: Adjust LRCLK width Clément Péron
2020-04-18 14:39 ` [PATCH 2/7] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-04-18 14:39 ` [PATCH 3/7] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-04-18 14:39 ` [PATCH 4/7] ASoC: sun4i-i2s: Set sign extend sample Clément Péron
2020-04-18 21:30   ` Clément Péron [this message]
2020-04-18 14:39 ` [PATCH 5/7] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-04-18 14:39 ` [PATCH 6/7] ASoC: sun4i-i2s: Adjust regmap settings Clément Péron
2020-04-18 14:39 ` [PATCH 7/7] arm64: dts: sun50i-h6: Add HDMI audio to H6 DTSI Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJiuCcdH0=wdKfmAquNfv=0AT_S8qx0Nasbb4m6itWXjUyw8_g@mail.gmail.com' \
    --to=peron.clem@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).