From: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: "Amelie Delaunay" <amelie.delaunay@st.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Matti Vaittinen" <matti.vaittinen@fi.rohmeurope.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
Linux-ALSA <alsa-devel@alsa-project.org>,
"Stefan Agner" <stefan@agner.ch>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Paul Cercueil" <paul@crapouillou.net>,
"Masahiro Yamada" <yamada.masahiro@socionext.com>,
"Chris Brandt" <chris.brandt@renesas.com>,
"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
linux-riscv <linux-riscv@lists.infradead.org>,
"Fabio Estevam" <festevam@gmail.com>,
"moderated list:ARM/STM32 ARCHITECTURE"
<linux-stm32@st-md-mailman.stormreply.com>,
"Alexandre Torgue" <alexandre.torgue@st.com>,
"open list:MEDIA DRIVERS FOR RENESAS - FCP"
<linux-renesas-soc@vger.kernel.org>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
"Anson Huang" <Anson.Huang@nxp.com>,
"Lee Jones" <lee.jones@linaro.org>,
"Takashi Iwai" <tiwai@suse.com>,
"Magnus Damm" <magnus.damm@gmail.com>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Chen-Yu Tsai" <wens@csie.org>, "Andy Gross" <agross@kernel.org>,
"maintainer:BROADCOM BCM7XXX ARM ARCHITECTURE"
<bcm-kernel-feedback-list@broadcom.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Andy Teng" <andy.teng@mediatek.com>,
"Jacopo Mondi" <jacopo+renesas@jmondi.org>,
"Sungbo Eo" <mans0n@gorani.run>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
devicetree@vger.kernel.org,
"Cristian Ciocaltea" <cristian.ciocaltea@gmail.com>,
"Charles Keepax" <ckeepax@opensource.cirrus.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Ray Jui" <rjui@broadcom.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Sean Wang" <sean.wang@mediatek.com>,
"Maxime Ripard" <mripard@kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
"Richard Fitzgerald" <rf@opensource.cirrus.com>,
"Mark Brown" <broonie@kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@lists.infradead.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
"Sricharan R" <sricharan@codeaurora.org>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Hoan Tran" <hoan@os.amperecomputing.com>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Scott Branden" <sbranden@broadcom.com>,
linux-unisoc@lists.infradead.org,
- <patches@opensource.cirrus.com>,
"Chris Packham" <chris.packham@alliedtelesis.co.nz>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Serge Semin" <fancer.lancer@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Paul Kocialkowski" <paul.kocialkowski@bootlin.com>,
"Yash Shah" <yash.shah@sifive.com>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Linux Media Mailing List" <linux-media@vger.kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Andreas Färber" <afaerber@suse.de>
Subject: Re: [PATCH v2 01/13] dt-bindings: gpio: add common schema for GPIO controllers
Date: Fri, 18 Sep 2020 08:30:02 -0600 [thread overview]
Message-ID: <CAL_JsqJCLgf6syqV=jNPHPyu02ygwWCDDV+U9VCm0qRpLkirSQ@mail.gmail.com> (raw)
In-Reply-To: <20200917165301.23100-2-krzk@kernel.org>
On Thu, Sep 17, 2020 at 10:53 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Convert parts of gpio.txt bindings into common dtschema file for GPIO
> controllers. The schema enforces proper naming of GPIO controller nodes
> and GPIO hogs.
Did you not see my previous reply about a common schema? We already
have a common GPIO and hog schema in dtschema. Please add to it
whatever is missing.
My goal is all common schema end up in dtschema, but I haven't pushed
folks to do that yet. Ones I've done are there though. One issue is
what's in dtschema should be GPL/BSD and the existing text bindings
are default GPL, so there's a relicensing exercise. In some cases, the
schema is there but I haven't copied over the descriptions.
Rob
> + description:
> + Indicates the start and size of the GPIOs that can't be used.
> +
> + ngpios:
> + description: |
> + Optionally, a GPIO controller may have a "ngpios" property. This property
> + indicates the number of in-use slots of available slots for GPIOs. The
> + typical example is something like this: the hardware register is 32 bits
> + wide, but only 18 of the bits have a physical counterpart. The driver is
> + generally written so that all 32 bits can be used, but the IP block is
> + reused in a lot of designs, some using all 32 bits, some using 18 and
> + some using 12. In this case, setting "ngpios = <18>;" informs the driver
> + that only the first 18 GPIOs, at local offset 0 .. 17, are in use.
> +
> + If these GPIOs do not happen to be the first N GPIOs at offset 0...N-1,
> + an additional set of tuples is needed to specify which GPIOs are
> + unusable, with the gpio-reserved-ranges binding.
> +
> +patternProperties:
> + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
> + type: object
> + description:
> + The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
> + providing automatic GPIO request and configuration as part of the
> + gpio-controller's driver probe function.
> + Each GPIO hog definition is represented as a child node of the GPIO controller.
> +
> + properties:
> + gpio-hog: true
> + gpios: true
> + input: true
> + output-high: true
> + output-low: true
> + line-name:
> + description:
> + The GPIO label name. If not present the node name is used.
> +
> + required:
> + - gpio-hog
> + - gpios
> +
> + oneOf:
> + - required:
> + - input
> + - required:
> + - output-high
> + - required:
> + - output-low
> +
> + additionalProperties: false
> +
> +required:
> + - "#gpio-cells"
> + - gpio-controller
> +
> +examples:
> + - |
> + gpio-controller@15000000 {
> + compatible = "foo";
> + reg = <0x15000000 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + ngpios = <18>;
> + gpio-reserved-ranges = <0 4>, <12 2>;
> + gpio-line-names = "MMC-CD", "MMC-WP", "VDD eth", "RST eth", "LED R",
> + "LED G", "LED B", "Col A", "Col B", "Col C", "Col D",
> + "Row A", "Row B", "Row C", "Row D", "NMI button",
> + "poweroff", "reset";
> + };
> +
> + - |
> + gpio-controller@1400 {
> + compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
> + reg = <0x1400 0x18>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + line-b-hog {
> + gpio-hog;
> + gpios = <6 0>;
> + input;
> + line-name = "foo-bar-gpio";
> + };
> + };
> --
> 2.17.1
>
next prev parent reply other threads:[~2020-09-21 8:27 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-17 16:52 [PATCH v2 00/13] gpio: add common dtschema Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 01/13] dt-bindings: gpio: add common schema for GPIO controllers Krzysztof Kozlowski
2020-09-17 20:09 ` Laurent Pinchart
2020-09-18 7:52 ` Krzysztof Kozlowski
2020-09-18 14:18 ` Laurent Pinchart
2020-09-18 14:30 ` Rob Herring [this message]
2020-09-20 19:39 ` Krzysztof Kozlowski
2020-09-22 15:40 ` Rob Herring
2020-09-17 16:52 ` [PATCH v2 02/13] dt-bindings: gpio: include common schema in " Krzysztof Kozlowski
2020-09-17 20:13 ` Laurent Pinchart
2020-09-17 16:52 ` [PATCH v2 03/13] dt-bindings: gpio: pl061: add missing properties and include common schema Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 04/13] dt-bindings: gpio: fsl-imx-gpio: add i.MX ARMv6 and ARMv7 compatibles Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 05/13] dt-bindings: gpio: fsl-imx-gpio: add gpio-line-names Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 06/13] dt-bindings: gpio: gpio-vf610: fix iMX 7ULP compatible matching Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 07/13] dt-bindings: media: include common schema in GPIO controllers Krzysztof Kozlowski
2020-09-17 16:52 ` [PATCH v2 08/13] dt-bindings: mfd: " Krzysztof Kozlowski
2020-09-21 9:54 ` Charles Keepax
2020-09-17 16:52 ` [PATCH v2 09/13] dt-bindings: pinctrl: " Krzysztof Kozlowski
2020-09-17 19:03 ` Paul Cercueil
2020-09-17 20:12 ` Laurent Pinchart
2020-09-21 9:55 ` Charles Keepax
2020-09-17 16:52 ` [PATCH v2 10/13] ASoC: dt-bindings: zl38060: " Krzysztof Kozlowski
2020-09-17 16:59 ` Mark Brown
2020-09-17 16:52 ` [PATCH v2 11/13] arm64: dts: imx8mq-librem5: correct GPIO hog property Krzysztof Kozlowski
2020-09-17 16:53 ` [PATCH v2 12/13] arm64: dts: imx8mq-librem5: align GPIO hog names with dtschema Krzysztof Kozlowski
2020-09-17 16:53 ` [PATCH v2 13/13] ARM: dts: imx: " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAL_JsqJCLgf6syqV=jNPHPyu02ygwWCDDV+U9VCm0qRpLkirSQ@mail.gmail.com' \
--to=robh+dt@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=afaerber@suse.de \
--cc=agross@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=alsa-devel@alsa-project.org \
--cc=amelie.delaunay@st.com \
--cc=andy.teng@mediatek.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=bgolaszewski@baylibre.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=chris.brandt@renesas.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=ckeepax@opensource.cirrus.com \
--cc=cristian.ciocaltea@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=festevam@gmail.com \
--cc=geert+renesas@glider.be \
--cc=hoan@os.amperecomputing.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=krzk@kernel.org \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-unisoc@lists.infradead.org \
--cc=magnus.damm@gmail.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mans0n@gorani.run \
--cc=matthias.bgg@gmail.com \
--cc=matti.vaittinen@fi.rohmeurope.com \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=mripard@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=palmer@dabbelt.com \
--cc=patches@opensource.cirrus.com \
--cc=paul.kocialkowski@bootlin.com \
--cc=paul.walmsley@sifive.com \
--cc=paul@crapouillou.net \
--cc=rf@opensource.cirrus.com \
--cc=rjui@broadcom.com \
--cc=s.hauer@pengutronix.de \
--cc=sbranden@broadcom.com \
--cc=sean.wang@mediatek.com \
--cc=shawnguo@kernel.org \
--cc=sricharan@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=stefan@agner.ch \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
--cc=yamada.masahiro@socionext.com \
--cc=yash.shah@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).