Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Russell King <rmk+kernel@arm.linux.org.uk>
To: alsa-devel@alsa-project.org, dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	David Airlie <airlied@linux.ie>, Mark Brown <broonie@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Yakir Yang <ykk@rock-chips.com>
Subject: [PATCH RFC v2 02/13] drm: bridge/dw_hdmi: clean up phy configuration
Date: Thu, 02 Apr 2015 10:21:25 +0100
Message-ID: <E1YdbJV-00084q-KO@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20150402092050.GH24899@n2100.arm.linux.org.uk>

The phy configuration is dependent on the SoC, and we look up values for
some of the registers in SoC specific data.  However, we had partially
programmed the phy before we had successfully looked up the clock rate.
Also, we were only checking that we had a valid configuration for the
currctrl register.

Move all these lookups to the start of this function instead, so we can
check that all lookups were successful before beginning to program the
phy.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/gpu/drm/bridge/dw_hdmi.c | 68 +++++++++++++++++++++-------------------
 1 file changed, 35 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 3494391e4199..23ea8c5c85b6 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -753,12 +753,12 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
 static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
 			      unsigned char res, int cscon)
 {
-	unsigned res_idx, i;
+	unsigned res_idx;
 	u8 val, msec;
-	const struct dw_hdmi_plat_data *plat_data = hdmi->plat_data;
-	const struct dw_hdmi_mpll_config *mpll_config = plat_data->mpll_cfg;
-	const struct dw_hdmi_curr_ctrl *curr_ctrl = plat_data->cur_ctr;
-	const struct dw_hdmi_phy_config *phy_config = plat_data->phy_config;
+	const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
+	const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
+	const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
+	const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
 
 	if (prep)
 		return -EINVAL;
@@ -778,6 +778,30 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
 		return -EINVAL;
 	}
 
+	/* PLL/MPLL Cfg - always match on final entry */
+	for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
+		if (hdmi->hdmi_data.video_mode.mpixelclock <=
+		    mpll_config->mpixelclock)
+			break;
+
+	for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
+		if (hdmi->hdmi_data.video_mode.mpixelclock <=
+		    curr_ctrl->mpixelclock)
+			break;
+
+	for (; phy_config->mpixelclock != ~0UL; phy_config++)
+		if (hdmi->hdmi_data.video_mode.mpixelclock <=
+		    phy_config->mpixelclock)
+			break;
+
+	if (mpll_config->mpixelclock == ~0UL ||
+	    curr_ctrl->mpixelclock == ~0UL ||
+	    phy_config->mpixelclock == ~0UL) {
+		dev_err(hdmi->dev, "Pixel clock %d - unsupported by HDMI\n",
+			hdmi->hdmi_data.video_mode.mpixelclock);
+		return -EINVAL;
+	}
+
 	/* Enable csc path */
 	if (cscon)
 		val = HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH;
@@ -803,40 +827,18 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
 		    HDMI_PHY_I2CM_SLAVE_ADDR);
 	hdmi_phy_test_clear(hdmi, 0);
 
-	/* PLL/MPLL Cfg - always match on final entry */
-	for (i = 0; mpll_config[i].mpixelclock != (~0UL); i++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    mpll_config[i].mpixelclock)
-			break;
-
-	hdmi_phy_i2c_write(hdmi, mpll_config[i].res[res_idx].cpce, 0x06);
-	hdmi_phy_i2c_write(hdmi, mpll_config[i].res[res_idx].gmp, 0x15);
-
-	for (i = 0; curr_ctrl[i].mpixelclock != (~0UL); i++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    curr_ctrl[i].mpixelclock)
-			break;
-
-	if (curr_ctrl[i].mpixelclock == (~0UL)) {
-		dev_err(hdmi->dev, "Pixel clock %d - unsupported by HDMI\n",
-			hdmi->hdmi_data.video_mode.mpixelclock);
-		return -EINVAL;
-	}
+	hdmi_phy_i2c_write(hdmi, mpll_config->res[res_idx].cpce, 0x06);
+	hdmi_phy_i2c_write(hdmi, mpll_config->res[res_idx].gmp, 0x15);
 
 	/* CURRCTRL */
-	hdmi_phy_i2c_write(hdmi, curr_ctrl[i].curr[res_idx], 0x10);
+	hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[res_idx], 0x10);
 
 	hdmi_phy_i2c_write(hdmi, 0x0000, 0x13);  /* PLLPHBYCTRL */
 	hdmi_phy_i2c_write(hdmi, 0x0006, 0x17);
 
-	for (i = 0; phy_config[i].mpixelclock != (~0UL); i++)
-		if (hdmi->hdmi_data.video_mode.mpixelclock <=
-		    phy_config[i].mpixelclock)
-			break;
-
-	hdmi_phy_i2c_write(hdmi, phy_config[i].term, 0x19);  /* TXTERM */
-	hdmi_phy_i2c_write(hdmi, phy_config[i].sym_ctr, 0x09); /* CKSYMTXCTRL */
-	hdmi_phy_i2c_write(hdmi, phy_config[i].vlev_ctr, 0x0E); /* VLEVCTRL */
+	hdmi_phy_i2c_write(hdmi, phy_config->term, 0x19);  /* TXTERM */
+	hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr, 0x09); /* CKSYMTXCTRL */
+	hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr, 0x0E); /* VLEVCTRL */
 
 	/* REMOVE CLK TERM */
 	hdmi_phy_i2c_write(hdmi, 0x8000, 0x05);  /* CKCALCTRL */
-- 
1.8.3.1

  parent reply index

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-02  9:20 [RFC v2 0/13] dw_hdmi cleanups, audio preparation, helpers and ahb audio support Russell King - ARM Linux
2015-04-02  9:21 ` [PATCH RFC v2 01/13] drm: imx/dw_hdmi: move phy comments Russell King
2015-04-02  9:21 ` Russell King [this message]
2015-04-02  9:21 ` [PATCH RFC v2 03/13] drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator() Russell King
2015-04-02  9:21 ` [PATCH RFC v2 04/13] drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode() Russell King
2015-04-02  9:21 ` [PATCH RFC v2 05/13] drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little Russell King
2015-04-02  9:21 ` [PATCH RFC v2 06/13] drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced Russell King
2015-04-02  9:21 ` [PATCH RFC v2 07/13] drm: bridge/dw_hdmi: introduce interface to setting sample rate Russell King
2015-04-02  9:21 ` [PATCH RFC v2 08/13] drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio Russell King
2015-04-02  9:22 ` [PATCH RFC v2 09/13] drm/edid: add function to help find SADs Russell King
2015-04-02  9:22 ` [PATCH RFC v2 10/13] sound/core: add DRM ELD helper Russell King
2015-04-05 15:57   ` Takashi Iwai
2015-04-05 16:20     ` Russell King - ARM Linux
2015-04-05 16:46       ` Takashi Iwai
2015-04-05 17:26         ` Russell King - ARM Linux
2015-05-06 17:02           ` Anssi Hannula
2015-05-07 10:41             ` Russell King - ARM Linux
2015-05-07 11:11               ` Lars-Peter Clausen
2015-05-08 10:56           ` [alsa-devel] " Jyri Sarha
2015-05-08 11:42             ` Russell King - ARM Linux
2015-05-05 22:35     ` Mark Brown
2015-05-06  8:58       ` Liam Girdwood
2015-05-08 13:16   ` [alsa-devel] " Jyri Sarha
2015-05-08 13:27     ` Russell King - ARM Linux
2015-05-08 13:37       ` Jyri Sarha
2015-04-02  9:22 ` [PATCH RFC v2 11/13] sound/core: add IEC958 channel status helper Russell King
2015-04-02  9:22 ` [PATCH RFC v2 12/13] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-04-02  9:22 ` [PATCH RFC v2 13/13] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-05-09 10:25 ` [PATCH v3 0/13] dw_hdmi cleanups, audio preparation, helpers and ahb audio support Russell King - ARM Linux
2015-05-09 10:25   ` [PATCH 01/13] drm: imx/dw_hdmi: move phy comments Russell King
2015-05-09 10:26   ` [PATCH 02/13] drm: bridge/dw_hdmi: clean up phy configuration Russell King
2015-05-22 15:19     ` Yakir
2015-05-09 10:26   ` [PATCH 03/13] drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator() Russell King
2015-05-22 15:22     ` Yakir
2015-05-09 10:26   ` [PATCH 04/13] drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode() Russell King
2015-05-09 10:26   ` [PATCH 05/13] drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little Russell King
2015-05-09 10:26   ` [PATCH 06/13] drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced Russell King
2015-05-09 10:26   ` [PATCH 07/13] drm: bridge/dw_hdmi: introduce interface to setting sample rate Russell King
2015-05-22 15:26     ` Yakir
2015-05-09 10:26   ` [PATCH 08/13] drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio Russell King
2015-05-22 15:28     ` Yakir
2015-05-09 10:26   ` [PATCH 09/13] drm/edid: add function to help find SADs Russell King
2015-05-09 10:26   ` [PATCH 10/13] sound/core: add DRM ELD helper Russell King
2015-05-22 12:20     ` [alsa-devel] " Mark Brown
2015-05-22 13:15       ` Russell King - ARM Linux
2015-05-22 13:30         ` Takashi Iwai
2015-05-22 13:53           ` Russell King - ARM Linux
2015-05-22 13:54             ` Takashi Iwai
2015-05-22 14:00               ` Russell King - ARM Linux
2015-05-22 14:02                 ` Takashi Iwai
2015-05-22 14:05                   ` Takashi Iwai
2015-05-22 16:12                     ` Russell King - ARM Linux
2015-05-09 10:26   ` [PATCH 11/13] sound/core: add IEC958 channel status helper Russell King
2015-05-22 12:40     ` Mark Brown
2015-05-09 10:26   ` [PATCH 12/13] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-05-09 16:49     ` [alsa-devel] " Anssi Hannula
2015-05-09 16:55       ` Russell King - ARM Linux
2015-05-09 17:07         ` Anssi Hannula
2015-05-09 17:40           ` Russell King - ARM Linux
2015-05-09 17:53             ` Russell King - ARM Linux
2015-05-09 17:55             ` Anssi Hannula
2015-05-09 18:11               ` Russell King - ARM Linux
2015-05-10 18:59                 ` Anssi Hannula
2015-05-10 19:33                   ` Russell King - ARM Linux
2015-05-10 20:47                     ` Anssi Hannula
2015-05-11 15:58                     ` Mark Brown
2015-05-09 10:26   ` [PATCH 13/13] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-05-27 10:43     ` Daniel Vetter
2015-05-27 11:43       ` Mark Brown
2015-05-27 17:31       ` Russell King - ARM Linux
2015-05-27 21:29         ` Daniel Vetter
2015-05-27 21:44           ` Russell King - ARM Linux
2015-05-28  6:43             ` Daniel Vetter
2015-05-28  4:56         ` [alsa-devel] " Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1YdbJV-00084q-KO@rmk-PC.arm.linux.org.uk \
    --to=rmk+kernel@arm.linux.org.uk \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=ykk@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git