From: "S.j. Wang" <shengjiu.wang@nxp.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"timur@kernel.org" <timur@kernel.org>,
"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
"tiwai@suse.com" <tiwai@suse.com>,
"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
"broonie@kernel.org" <broonie@kernel.org>,
"festevam@gmail.com" <festevam@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel] [PATCH 2/3] ASoC: fsl_asrc: update supported sample format
Date: Wed, 18 Sep 2019 02:58:17 +0000 [thread overview]
Message-ID: <VE1PR04MB647930580E370538148FAAF2E38E0@VE1PR04MB6479.eurprd04.prod.outlook.com> (raw)
Hi
>
> On Fri, Sep 13, 2019 at 05:48:40AM +0000, S.j. Wang wrote:
> > Hi
> >
> > >
> > > On Tue, Sep 10, 2019 at 02:07:25AM +0000, S.j. Wang wrote:
> > > > > On Mon, Sep 09, 2019 at 06:33:20PM -0400, Shengjiu Wang wrote:
> > > > > > The ASRC support 24bit/16bit/8bit input width, so S20_3LE
> > > > > > format should not be supported, it is word width is 20bit.
> > > > >
> > > > > I thought 3LE used 24-bit physical width. And the driver assigns
> > > > > ASRC_WIDTH_24_BIT to "width" for all non-16bit cases, so 20-bit
> > > > > would go for that 24-bit slot also. I don't clearly recall if I
> > > > > had explicitly tested S20_3LE, but I feel it should work since I put
> there...
> > > >
> > > > For S20_3LE, the width is 20bit, but the ASRC only support 24bit,
> > > > if set the ASRMCR1n.IWD= 24bit, because the actual width is 20
> > > > bit, the volume is Lower than expected, it likes 24bit data right shift 4
> bit.
> > > > So it is not supported.
> > >
> > > Hmm..S20_3LE right-aligns 20 bits in a 24-bit slot? I thought
> > > they're left aligned...
> > >
> > > If this is the case...shouldn't we have the same lower-volume
> > > problem for all hardwares that support S20_3LE now?
> >
> > Actually some hardware/module when they do transmission from FIFO to
> > shift register, they can select the start bit, for example from the
> > 20th bit. but not all module have this capability.
> >
> > For ASRC, it haven't. IWD can only cover the data width, there is no
> > Other bit for slot width.
>
> Okay..let's drop the S20_3LE then. But would it be possible for you to
> elaborate the reasoning into the commit message also? Just for case when
> people ask why we remove it simply.
>
> Thanks
OK.
Best regards
Wang shengjiu
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-09-18 2:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 2:58 S.j. Wang [this message]
-- strict thread matches above, loose matches on Subject: below --
2019-09-10 2:07 [alsa-devel] [PATCH 2/3] ASoC: fsl_asrc: update supported sample format S.j. Wang
2019-09-12 23:51 ` Nicolin Chen
2019-09-09 22:33 [alsa-devel] [PATCH 0/3] " Shengjiu Wang
2019-09-09 22:33 ` [alsa-devel] [PATCH 2/3] ASoC: fsl_asrc: " Shengjiu Wang
2019-09-09 20:19 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VE1PR04MB647930580E370538148FAAF2E38E0@VE1PR04MB6479.eurprd04.prod.outlook.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).