From: Dmitry Osipenko <digetx@gmail.com>
To: Ben Dooks <ben.dooks@codethink.co.uk>,
linux-tegra@vger.kernel.org, alsa-devel@alsa-project.org,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-kernel@lists.codethink.co.uk,
Edward Cragg <edward.cragg@codethink.co.uk>
Subject: Re: [alsa-devel] [PATCH v4 3/7] ASoC: tegra: i2s: Add support for more than 2 channels
Date: Tue, 8 Oct 2019 18:29:31 +0300 [thread overview]
Message-ID: <cfd308bd-290a-f72f-6876-d94151c09843@gmail.com> (raw)
In-Reply-To: <20191007153136.4920-4-ben.dooks@codethink.co.uk>
Hello Ben,
07.10.2019 18:31, Ben Dooks пишет:
> From: Edward Cragg <edward.cragg@codethink.co.uk>
>
> The CIF configuration and clock setting is currently hard coded for 2
> channels. Since the hardware is capable of supporting 1-8 channels add
> support for reading the channel count from the supplied parameters to
> allow for better TDM support. It seems the original implementation of this
> driver was fixed at 2 channels for simplicity, and not implementing TDM.
>
> Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
> [ben.dooks@codethink.co.uk: added is_tdm and channel nr check]
> [ben.dooks@codethink.co.uk: merge edge control into set-format]
> [ben.dooks@codethink.co.uk: removed is_tdm and moved edge to hw_params]
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
> sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
> index 063f34c882af..7382f7949bf4 100644
> --- a/sound/soc/tegra/tegra30_i2s.c
> +++ b/sound/soc/tegra/tegra30_i2s.c
> @@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> {
> struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> unsigned int mask = 0, val = 0;
> + unsigned int ch_mask, ch_val = 0;
>
> switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> case SND_SOC_DAIFMT_NB_NF:
> @@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> return -EINVAL;
> }
>
> + ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
> mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
> switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> case SND_SOC_DAIFMT_CBS_CFS:
> @@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
> TEGRA30_I2S_CTRL_LRCK_MASK;
> switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> case SND_SOC_DAIFMT_DSP_A:
> + ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
> val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
> val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
> break;
> case SND_SOC_DAIFMT_DSP_B:
> + ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
Downstream code sets DSP_B to POS_EDGE, looks like you have a typo here.
Or does DSP_B happen to work with the NEG_EDGE?
[snip]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2019-10-08 15:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-07 15:31 [alsa-devel] tegra30 tdm support Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 1/7] ASoC: tegra: add a TDM configuration callback Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 2/7] ASoC: tegra: Allow 24bit and 32bit samples Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 3/7] ASoC: tegra: i2s: Add support for more than 2 channels Ben Dooks
2019-10-08 15:29 ` Dmitry Osipenko [this message]
2019-10-17 16:23 ` Ben Dooks
2019-10-17 17:38 ` Dmitry Osipenko
2019-10-24 16:11 ` Jon Hunter
2019-11-05 11:58 ` Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 4/7] ASoC: tegra: disable rx_fifo after disable stream Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 5/7] ASoC: tegra: set i2s_offset to 0 for tdm Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 6/7] ASoC: tegra: config fifos on hw_param changes Ben Dooks
2019-10-07 15:31 ` [alsa-devel] [PATCH v4 7/7] ASoC: tegra: take packing settings from the audio cif_config Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cfd308bd-290a-f72f-6876-d94151c09843@gmail.com \
--to=digetx@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=ben.dooks@codethink.co.uk \
--cc=broonie@kernel.org \
--cc=edward.cragg@codethink.co.uk \
--cc=jonathanh@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@lists.codethink.co.uk \
--cc=linux-tegra@vger.kernel.org \
--cc=perex@perex.cz \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).