Re: [PATCH v4 11/15] ASoC: dt-bindings: tegra: Add json-schema for Tegra audio graph card

[Sameer Pujar <spujar@nvidia.com>]

>> Add YAML schema for Tegra audio graph sound card DT bindings. It uses the
>> same DT bindings provided by generic audio graph driver. Along with this
>> few standard clock DT bindings are added which are specifically required
>> for Tegra audio.
>>
>> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
>> ---
>>   .../sound/nvidia,tegra-audio-graph-card.yaml       | 158 +++++++++++++++++++++
>>   1 file changed, 158 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
>> new file mode 100644
>> index 0000000..284d185
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
>> @@ -0,0 +1,158 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-graph-card.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Audio Graph based Tegra sound card driver
>> +
>> +description: |
>> +  This is based on generic audio graph card driver along with additional
>> +  customizations for Tegra platforms. It uses the same bindings with
>> +  additional standard clock DT bindings required for Tegra.
>> +
>> +  See{LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> You should be able to just $ref this at the top level.

I am seeing one problem while using $ref like below.
allOf:
   - $ref: /schemas/sound/audio-graph-card.yaml

I see below while running doc validator.
"Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.example.dt.yaml: 
tegra_sound: compatible:0: 'audio-graph-card' was expected"

Is there a way to avoid this?

>
>> +
>> +maintainers:
>> +  - Jon Hunter <jonathanh@nvidia.com>
>> +  - Sameer Pujar <spujar@nvidia.com>
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - nvidia,tegra210-audio-graph-card
>> +          - nvidia,tegra186-audio-graph-card
>> +

>> +  dais:
>> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/dais
>> +
>> +  label:
>> +    $ref: /schemas/sound/simple-card.yaml#/properties/label
>> +
>> +  pa-gpios:
>> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/pa-gpios
>> +
>> +  widgets:
>> +    $ref: /schemas/sound/simple-card.yaml#/definitions/widgets
>> +
>> +  routing:
>> +    $ref: /schemas/sound/simple-card.yaml#/definitions/routing
>> +
>> +  mclk-fs:
>> +    $ref: /schemas/sound/simple-card.yaml#/definitions/mclk-fs
>> +
>> +  prefix:
>> +    $ref: /schemas/sound/simple-card.yaml#/definitions/prefix
> And drop all of these.

Could not re-use because of above compatible problem. Also require some 
additional properties for Tegra.

>> +
>> +  clocks:
>> +   minItems: 2
>> +
>> +  clock-names:
>> +   minItems: 2
> Don't need this.

This is required for Tegra audio graph card to update clock rates at 
runtime.

>
>> +   items:
>> +     - const: pll_a
>> +     - const: plla_out0
>> +
>> +  assigned-clocks:
>> +    minItems: 1
>> +    maxItems: 3
>> +
>> +  assigned-clock-parents:
>> +    minItems: 1
>> +    maxItems: 3
>> +
>> +  assigned-clock-rates:
>> +    minItems: 1
>> +    maxItems: 3
>> +

It is required for initialisation of above clocks with specific rates.

>> +  ports:
>> +    $ref: /schemas/sound/audio-graph-card.yaml#/properties/ports
>> +
>> +patternProperties:
>> +  "^port(@[0-9a-f]+)?$":
>> +    $ref: /schemas/sound/audio-graph-card.yaml#/definitions/port
> And these can be dropped. Unless what each port is is Tegra specific.

May be I can drop this if I could just directly include 
audio-graph-card.yaml and extend required properties for Tegra.