Alsa-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: "Maxime Ripard" <maxime@cerno.tech>,
	"Clément Péron" <peron.clem@gmail.com>
Cc: devicetree@vger.kernel.org,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
	linux-sunxi@googlegroups.com, Takashi Iwai <tiwai@suse.com>,
	Marcus Cooper <codekipper@gmail.com>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params
Date: Tue, 6 Oct 2020 00:03:14 -0500
Message-ID: <fae04296-9865-3dcb-e02d-46062bf778a8@sholland.org> (raw)
In-Reply-To: <20201005121307.v6jpyeyfi4kxc2cl@gilmour.lan>

On 10/5/20 7:13 AM, Maxime Ripard wrote:
> On Sat, Oct 03, 2020 at 04:19:38PM +0200, Clément Péron wrote:
>> As slots and slot_width can be set manually using set_tdm().
>> These values are then kept in sun4i_i2s struct.
>> So we need to check if these values are setted or not
>> in the struct.
>>
>> Avoid to check for this logic in set_chan_cfg(). This will
>> duplicate the same check instead pass the required values
>> as params to set_chan_cfg().
>>
>> This will also avoid a bug when we will enable 20/24bits support,
>> i2s->slot_width is not actually used in the lrck_period computation.
>>
>> Suggested-by: Samuel Holland <samuel@sholland.org>
>> Signed-off-by: Clément Péron <peron.clem@gmail.com>
>> ---
>>  sound/soc/sunxi/sun4i-i2s.c | 36 ++++++++++++++----------------------
>>  1 file changed, 14 insertions(+), 22 deletions(-)
>>
>> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
>> index c5ccd423e6d3..1f577dbc20a6 100644
>> --- a/sound/soc/sunxi/sun4i-i2s.c
>> +++ b/sound/soc/sunxi/sun4i-i2s.c
>> @@ -177,8 +177,9 @@ struct sun4i_i2s_quirks {
>>  	unsigned long (*get_bclk_parent_rate)(const struct sun4i_i2s *);
>>  	s8	(*get_sr)(const struct sun4i_i2s *, int);
>>  	s8	(*get_wss)(const struct sun4i_i2s *, int);
>> -	int	(*set_chan_cfg)(const struct sun4i_i2s *,
>> -				const struct snd_pcm_hw_params *);
>> +	int	(*set_chan_cfg)(const struct sun4i_i2s *i2s,
>> +				unsigned int channels,	unsigned int slots,
>> +				unsigned int slot_width);
>>  	int	(*set_fmt)(const struct sun4i_i2s *, unsigned int);
>>  };
>>  
>> @@ -414,10 +415,9 @@ static s8 sun8i_i2s_get_sr_wss(const struct sun4i_i2s *i2s, int width)
>>  }
>>  
>>  static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>> -				  const struct snd_pcm_hw_params *params)
>> +				  unsigned int channels, unsigned int slots,
>> +				  unsigned int slot_width)
>>  {
>> -	unsigned int channels = params_channels(params);
>> -
>>  	/* Map the channels for playback and capture */
>>  	regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG, 0x76543210);
>>  	regmap_write(i2s->regmap, SUN4I_I2S_RX_CHAN_MAP_REG, 0x00003210);
>> @@ -434,15 +434,11 @@ static int sun4i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>>  }
>>  
>>  static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>> -				  const struct snd_pcm_hw_params *params)
>> +				  unsigned int channels, unsigned int slots,
>> +				  unsigned int slot_width)
>>  {
>> -	unsigned int channels = params_channels(params);
>> -	unsigned int slots = channels;
>>  	unsigned int lrck_period;
>>  
>> -	if (i2s->slots)
>> -		slots = i2s->slots;
>> -
>>  	/* Map the channels for playback and capture */
>>  	regmap_write(i2s->regmap, SUN8I_I2S_TX_CHAN_MAP_REG, 0x76543210);
>>  	regmap_write(i2s->regmap, SUN8I_I2S_RX_CHAN_MAP_REG, 0x76543210);
>> @@ -467,11 +463,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>>  	case SND_SOC_DAIFMT_DSP_B:
>>  	case SND_SOC_DAIFMT_LEFT_J:
>>  	case SND_SOC_DAIFMT_RIGHT_J:
>> -		lrck_period = params_physical_width(params) * slots;
>> +		lrck_period = slot_width * slots;
>>  		break;
>>  
>>  	case SND_SOC_DAIFMT_I2S:
>> -		lrck_period = params_physical_width(params);
>> +		lrck_period = slot_width;
>>  		break;
>>  
>>  	default:
>> @@ -490,15 +486,11 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>>  }
>>  
>>  static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>> -				      const struct snd_pcm_hw_params *params)
>> +				      unsigned int channels, unsigned int slots,
>> +				      unsigned int slot_width)
>>  {
>> -	unsigned int channels = params_channels(params);
>> -	unsigned int slots = channels;
>>  	unsigned int lrck_period;
>>  
>> -	if (i2s->slots)
>> -		slots = i2s->slots;
>> -
>>  	/* Map the channels for playback and capture */
>>  	regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG, 0xFEDCBA98);
>>  	regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG, 0x76543210);
>> @@ -525,11 +517,11 @@ static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>>  	case SND_SOC_DAIFMT_DSP_B:
>>  	case SND_SOC_DAIFMT_LEFT_J:
>>  	case SND_SOC_DAIFMT_RIGHT_J:
>> -		lrck_period = params_physical_width(params) * slots;
>> +		lrck_period = slot_width * slots;
>>  		break;
>>  
>>  	case SND_SOC_DAIFMT_I2S:
>> -		lrck_period = params_physical_width(params);
>> +		lrck_period = slot_width;
>>  		break;
>>  
>>  	default:
>> @@ -565,7 +557,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
>>  	if (i2s->slot_width)
>>  		slot_width = i2s->slot_width;
>>  
>> -	ret = i2s->variant->set_chan_cfg(i2s, params);
>> +	ret = i2s->variant->set_chan_cfg(i2s, channels, slots, slot_width);
> 
> Isn't slots and slot_width set to 0 here ?
> 
> And therefore, wouldn't we set lrck_period to 0 if we're using any
> format but I2S?
> 
> More importantly, I'm not really convinced this needs to be done, and it
> introduces some side effects that are not explained.

If I set dai-tdm-slot-width = <32> and start a stream using S16_LE,
currently we would calculate BCLK for 32-bit slots, but program
lrck_period for 16-bit slots, making the sample rate double what we
expected. That sounds like a bug to me. (Because of that, as Chen-Yu
mentioned in reply to v5, this should be the first patch in the series.)

Could you be more specific what side effects you are referring to?

> Maxime

Cheers,
Samuel

  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-03 14:19 [PATCH v6 00/14] Add Allwinner H3/H5/H6/A64 HDMI audio Clément Péron
2020-10-03 14:19 ` [PATCH v6 01/14] ASoC: sun4i-i2s: Add support for H6 I2S Clément Péron
2020-10-03 14:19 ` [PATCH v6 02/14] ASoC: sun4i-i2s: Change set_chan_cfg() params Clément Péron
2020-10-05 12:13   ` Maxime Ripard
2020-10-05 13:23     ` Clément Péron
2020-10-12 12:15       ` Maxime Ripard
2020-10-13  1:15         ` Samuel Holland
2020-10-19 10:24           ` Maxime Ripard
2020-10-06  5:03     ` Samuel Holland [this message]
2020-10-12 12:20       ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 03/14] ASoC: sun4i-i2s: Change get_sr() and get_wss() to be more explicit Clément Péron
2020-10-05 12:14   ` Maxime Ripard
2020-10-05 13:35     ` Clément Péron
2020-10-03 14:19 ` [PATCH v6 04/14] ASoC: sun4i-i2s: Set sign extend sample Clément Péron
2020-10-03 14:19 ` [PATCH v6 05/14] ASoc: sun4i-i2s: Add 20 and 24 bit support Clément Péron
2020-10-03 14:19 ` [PATCH v6 06/14] ASoC: sun4i-i2s: Fix sun8i volatile regs Clément Péron
2020-10-03 14:19 ` [PATCH v6 07/14] ASoC: sun4i-i2s: Fix setting of FIFO modes Clément Péron
2020-10-03 14:19 ` [PATCH v6 08/14] ASoC: sun4i-i2s: fix coding-style for callback definition Clément Péron
2020-10-05 12:14   ` Maxime Ripard
2020-10-03 14:19 ` [PATCH v6 09/14] dt-bindings: ASoC: sun4i-i2s: Add H6 compatible Clément Péron
2020-10-03 14:19 ` [PATCH v6 10/14] arm64: dts: allwinner: h6: Add I2S1 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 11/14] arm64: dts: allwinner: a64: Add I2S2 node Clément Péron
2020-10-03 14:19 ` [PATCH v6 12/14] arm64: defconfig: Enable Allwinner i2s driver Clément Péron
2020-10-03 14:19 ` [PATCH v6 13/14] dt-bindings: sound: sun4i-i2s: Document H3 with missing RX channel possibility Clément Péron
2020-10-06 21:11   ` Rob Herring
2020-10-03 14:19 ` [PATCH v6 14/14] arm: dts: sunxi: h3/h5: Add I2S2 node Clément Péron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fae04296-9865-3dcb-e02d-46062bf778a8@sholland.org \
    --to=samuel@sholland.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=codekipper@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@siol.net \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime@cerno.tech \
    --cc=peron.clem@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Alsa-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/alsa-devel/0 alsa-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 alsa-devel alsa-devel/ https://lore.kernel.org/alsa-devel \
		alsa-devel@alsa-project.org
	public-inbox-index alsa-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.alsa-project.alsa-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git